Crickkette Posted February 22, 2011 Posted February 22, 2011 I have d/l Imgburn and have DVDFab as well. I am trying to use them together, but to no avail. I either get 'Getting Disc Physical Format Information (Last Recorded)... or Device Not Ready (Logical Unit is in process of becoming ready)'. I have no idea if I have all the right settings, or what, but my DVDFab is not working with Imgburn for some reason. Can someone please tell me what to do to rectify this problem? I would love to have a user friendly step-by-step video, (if there is any available), or else someone who has alot of patience. I set up my DvdFab tabs to write with Imgburn at a recommended speed. I then opened Imgburn, clicked on the write tab, inserted a blank dvd and closed the tray, I was then told to click on the running man, and see if my dvd info appreared. I made sure I clicked on settings, and the build tab, page 3 and checked three items on that page, and closed. Now, when I try to burn on DvdFab, imgburn appears on my screen, with the messages above, and then it just sits there, doing nothing. I thought once DVDFab and Imgburn were sync togther, it would just burn normally like it did with the VSO burn engine. I know there's something that I'm doing wrong, and I would just appreciate some much needed help. Thanks in advance for your reply! :-)
LIGHTNING UK! Posted February 22, 2011 Posted February 22, 2011 I either get 'Getting Disc Physical Format Information (Last Recorded)... or Device Not Ready (Logical Unit is in process of becoming ready)'. It sounds like your drive is having trouble with the discs. What discs are you using? What drive do you have? Load ImgBurn and copy + paste what you get in the Log window please.
Crickkette Posted February 26, 2011 Author Posted February 26, 2011 The discs I've been using for almost 6 months are DataRight Professional DVD-R's, and also, DVD-+R's. They are 16x/4/7gb, ultraviolet dye. I have used Memorex -r's and +r's, and have had luck with all of them for over 2 years, or more. My burner is a Memorex lightscribe MRX-53OLE dvd/cd/r/rw and dual layer burning capabilities, as well. The log is as follows: I 15:34:59 ImgBurn Version 2.5.5.0 started! I 15:34:59 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:34:59 Total Physical Memory: 785,712 KB - Available: 51,112 KB W 15:34:59 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 15:34:59 Initialising SPTI... I 15:34:59 Searching for SCSI / ATAPI devices... I 15:35:00 -> Drive 1 - Info: DVDRW IDE 16X A091 (D:) (ATA) I 15:35:00 Found 1 DVD±RW! I 15:35:16 Searching for SCSI / ATAPI devices... I 15:35:16 -> Drive 1 - Info: DVDRW IDE 16X A091 (D:) (ATA) I 15:35:16 Found 1 DVD±RW!
Crickkette Posted February 28, 2011 Author Posted February 28, 2011 I either get 'Getting Disc Physical Format Information (Last Recorded)... or Device Not Ready (Logical Unit is in process of becoming ready)'. It sounds like your drive is having trouble with the discs. What discs are you using? What drive do you have? Load ImgBurn and copy + paste what you get in the Log window please. I've loaded my log and have it here below in the last post. Could anyone please help me with this? What steps do I have to do to get IMGburn to work with DVDFab?? Please help??? Do I set up DVDFab first, and then IMGburn, and what steps should I take, and in what order to sync them so they work properly? I am at a loss, and would appreciate any and all help with this. Thank you! Crickkette
Recommended Posts