depgrumpy Posted March 9, 2011 Posted March 9, 2011 I have the movies already decoded using DVDFab. I have ImgBurn as the burning program. I have it set to write to data. I am using an LG BH10LS30. I get this message: I 23:12:19 ImgBurn Version 2.5.5.0 started! I 23:12:19 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 23:12:19 Total Physical Memory: 2,058,612 KB - Available: 872,952 KB I 23:12:19 Initialising SPTI... I 23:12:19 Searching for SCSI / ATAPI devices... I 23:12:20 -> Drive 1 - Info: HL-DT-ST DVD+-RW GT10N A105 (D:) (SATA) I 23:12:20 -> Drive 2 - Info: DVDFab Virtual Drive 1.1 (E:) (SCSI) I 23:12:20 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (G:) (USB) I 23:12:20 -> Drive 4 - Info: MATSHITA BD-RE UJ-220 1.00 (H:) (USB) I 23:12:20 Found 1 DVD±RW/RAM, 2 BD-REs and 1 HD DVD-ROM! I 23:12:20 Operation Started! I 23:12:20 Building Image Tree... I 23:12:21 Calculating Totals... I 23:12:21 Preparing Image... I 23:12:21 Contents: 9 Files, 15 Folders I 23:12:21 Content Type: BD Video I 23:12:21 Data Type: MODE1/2048 I 23:12:21 File System(s): UDF (2.50) I 23:12:21 Volume Label: TWILIGHT I 23:12:21 Size: 36,209,692 bytes I 23:12:21 Sectors: 17,687 I 23:12:21 Image Size: 37,224,448 bytes I 23:12:21 Image Sectors: 18,176 I 23:12:21 Operation Successfully Completed! - Duration: 00:00:00 I 23:12:21 Operation Started! I 23:12:21 Source File: -==/\/[bUILD IMAGE]\/\==- I 23:12:21 Source File Sectors: 18,176 (MODE1/2048) I 23:12:21 Source File Size: 37,224,448 bytes I 23:12:21 Source File Volume Identifier: TWILIGHT I 23:12:21 Source File Volume Set Identifier: 3E68B98A00004697 I 23:12:21 Source File Application Identifier: ImgBurn v2.5.5.0 I 23:12:21 Source File Implementation Identifier: ImgBurn I 23:12:21 Source File File System(s): UDF (2.50) I 23:12:21 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (G:) (USB) I 23:12:21 Destination Media Type: BD-R (Disc ID: VERBAT-IMw-000) (Speeds: 2x) I 23:12:21 Destination Media Sectors: 12,219,392 I 23:12:21 Write Mode: BD I 23:12:21 Write Type: DAO I 23:12:21 Write Speed: MAX I 23:12:21 BD-R Verify Not Required: Yes I 23:12:21 Link Size: Auto I 23:12:21 Lock Volume: Yes I 23:12:21 Test Mode: No I 23:12:21 OPC: No I 23:12:21 BURN-Proof: Enabled I 23:12:21 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) E 23:15:21 Failed to set Write Parameters! E 23:15:22 Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x97) E 23:15:29 Operation Failed! - Duration: 00:03:05 I 23:15:29 Average Write Rate: N/A - Maximum Write Rate: N/A Any help will be greatly appreciated.
LIGHTNING UK! Posted March 9, 2011 Posted March 9, 2011 You realise you're only trying to burn about 36MB onto a 25GB BD-R disc yeah?! Bit of a waste! Have you got the latest firmware installed? Right click the drive selection box and hit 'Capabilities'. See if you're running 1.00-09 (or 1.00-A9). If you aren't, right click again and select the 'Check For Firmware Updates' option.
Recommended Posts