scottywhu Posted April 15, 2011 Posted April 15, 2011 Hi, Wondered if anyone could help ? Since upgrading to Windows 7 I can no longer burn DL disks. I am using Verbatim 8x DVD+R DL My Drives are : Phillips PBDV16LSp1 ATA Device : Atapi DVD A DH16A3L SCSI Cdrom Device I have updated the drivers on my motherboard : (EVGA-122-CK-NF68) Here is the error : I/O Error Device (0:1:0)Philips PBDV16LSP1 B1.8 (E:) (ATA) Scsistatus : 0x02 Interpretation : CHeck Condition CDB : 2A 00 00 00 00 00 00 00 20 00 Interpretation : Write (10) - Sectors 0-31 Sense Area : 70 00 03 00 00 00 00 12 00 00 00 00 73 02 00 00 00 00 Interpretation : Power Calibration Area Is Full And here is the log : I 10:41:54 ImgBurn Version 2.5.5.0 started! I 10:41:54 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 10:41:54 Total Physical Memory: 2,882,088 KB - Available: 1,076,168 KB I 10:41:54 Initialising SPTI... I 10:41:54 Searching for SCSI / ATAPI devices... I 10:42:15 -> Drive 1 - Info: PHILIPS PBDV16LSP1 B1.8 (E:) (ATA) I 10:42:15 -> Drive 2 - Info: ATAPI DVD A DH16A3L 8H1F (F:) (ATA) I 10:42:15 Found 1 DVD±RW and 1 DVD±RW/RAM! I 10:42:25 Operation Started! I 10:42:25 Source File: C:\Users\Scott\Desktop\icon-mjte-x360.dvd I 10:42:25 Source File Sectors: 3,827,488 (MODE1/2048) I 10:42:25 Source File Size: 7,838,695,424 bytes I 10:42:25 Source File Volume Identifier: DVD_ROM I 10:42:25 Source File Volume Set Identifier: d0a44000MS UDFBridge I 10:42:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:42:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:42:25 Source File File System(s): ISO9660, UDF (1.50) I 10:42:25 Destination Device: [0:1:0] PHILIPS PBDV16LSP1 B1.8 (E:) (ATA) I 10:42:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) I 10:42:25 Destination Media Sectors: 4,173,824 I 10:42:25 Write Mode: DVD I 10:42:25 Write Type: DAO I 10:42:25 Write Speed: 2x I 10:42:25 Link Size: Auto I 10:42:25 Lock Volume: Yes I 10:42:25 Test Mode: No I 10:42:25 OPC: No I 10:42:25 BURN-Proof: Enabled W 10:42:25 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) I 10:42:25 Optimal L0 Data Zone Capacity: 1,913,760 I 10:42:25 Optimal L0 Data Zone Method: Copied From Original Disc I 10:42:25 Set L0 Data Zone Capacity Succeeded! I 10:42:25 Filling Buffer... (40 MB) I 10:42:26 Writing LeadIn... W 10:42:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 10:42:29 Retrying (1 of 20)... W 10:42:31 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:31 Retrying (2 of 20)... W 10:42:33 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:33 Retrying (3 of 20)... W 10:42:36 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:36 Retrying (4 of 20)... W 10:42:39 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:39 Retrying (5 of 20)... W 10:42:41 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:41 Retrying (6 of 20)... W 10:42:42 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:43 Retrying (7 of 20)... W 10:42:45 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:45 Retrying (8 of 20)... W 10:42:47 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:47 Retrying (9 of 20)... W 10:42:50 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:50 Retrying (10 of 20)... W 10:42:52 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:52 Retrying (11 of 20)... W 10:42:54 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:54 Retrying (12 of 20)... W 10:42:57 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:57 Retrying (13 of 20)... W 10:42:59 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:59 Retrying (14 of 20)... W 10:43:01 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:01 Retrying (15 of 20)... W 10:43:03 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:03 Retrying (16 of 20)... W 10:43:05 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:05 Retrying (17 of 20)... W 10:43:07 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:07 Retrying (18 of 20)... W 10:43:10 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:10 Retrying (19 of 20)... W 10:43:11 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:12 Retrying (20 of 20)... W 10:43:14 Retry Failed - Reason: Power Calibration Area Is Full Hopefully you can help, I am at a loss what to do next !! Many thanks Scott
LIGHTNING UK! Posted April 15, 2011 Posted April 15, 2011 Have you burnt MKM-003-00 with that Philips drive before? Try using the LiteOn instead. MKM-003-00 is 8x media, so a drive only listing 2.4x as the supported write speed probably doesn't support the MID/dye very well (or at all).
Recommended Posts