shadow ho-oh Posted April 25, 2011 Posted April 25, 2011 I had burned a wii game on to my dvd about a year ago, and recently it got scratched permanently, so i got rid of it and now i'm burning the file to a new disc. The problem I keep facing is that whenever i reach 92%-94% write, it stops writing and i get an error message that looks like this: I/O Error! Device: [1:0:0] TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 20 82 00 00 00 20 00 Interpretation: Write(10) - Sectors: 2130432 - 2130463 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 Interpretation: Write Error ^^This has happened 4 out of the 6 times i've tried (Other 2 times have been verification errors in which there was a Timeout In Logical Unit) Here's the log that went with the error message above: I 16:51:03 ImgBurn Version 2.5.5.0 started! I 16:51:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 16:51:03 Total Physical Memory: 1,038,208 KB - Available: 159,948 KB I 16:51:03 Initialising SPTI... I 16:51:03 Searching for SCSI / ATAPI devices... I 16:51:04 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) I 16:51:04 Found 1 DVD±RW/RAM! I 16:52:05 Operation Started! I 16:52:05 Source File: C:\Users\mommy\Downloads\Iso\wi-dbzbt3(compress).iso I 16:52:05 Source File Sectors: 2,294,912 (MODE1/2048) I 16:52:05 Source File Size: 4,699,979,776 bytes I 16:52:05 Source File Volume Identifier: Dragon Ball Z Budokai Tenkaichi 3 I 16:52:05 Source File File System(s): Special I 16:52:05 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) I 16:52:05 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x) I 16:52:05 Destination Media Sectors: 2,298,496 I 16:52:05 Write Mode: DVD I 16:52:05 Write Type: DAO I 16:52:05 Write Speed: 4x I 16:52:05 Link Size: Auto I 16:52:05 Lock Volume: No I 16:52:05 Test Mode: No I 16:52:05 OPC: No I 16:52:05 BURN-Proof: Enabled I 16:52:05 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 16:52:06 Filling Buffer... (40 MB) I 16:52:09 Writing LeadIn... I 16:52:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 16:52:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 16:54:10 Waiting for buffers to recover... (LBA: 208128) W 16:54:11 Waiting for hard disk activity to reach threshold level... I 16:54:12 Writing Sectors... W 17:24:11 Failed to Write Sectors 2130432 - 2130463 - Reason: Write Error W 17:24:11 Retrying (1 of 20)... W 17:24:11 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (2 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (3 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (4 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (5 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (6 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (7 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (8 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (9 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (10 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (11 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (12 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (13 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (14 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (15 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (16 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (17 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (18 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (19 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range W 17:24:12 Retrying (20 of 20)... W 17:24:12 Retry Failed - Reason: Logical Block Address out of Range E 17:48:24 Failed to Write Sectors 2130432 - 2130463 - Reason: Write Error I 17:48:24 Synchronising Cache... W 17:48:27 User opted to skip the 'Close Track/Session/Disc' functions. E 17:48:27 Failed to Write Image! I 17:48:27 Exporting Graph Data... I 17:48:27 Graph Data File: C:\Users\mommy\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H652M_0414_SUNDAY-APRIL-24-2011_4-52_PM_MCC_03RG20_4x.ibg I 17:48:27 Export Successfully Completed! E 17:48:27 Operation Failed! - Duration: 00:56:21 I 17:48:27 Average Write Rate: 1,271 KB/s (0.9x) - Maximum Write Rate: 5,611 KB/s (4.1x) Please help, this was my favorite game
mmalves Posted April 25, 2011 Posted April 25, 2011 What's the brand of the media you're using? Have you tried burning at 8x? Also you should avoid using the computer while burning, so that you're less likely to get buffer underruns.
shadow ho-oh Posted April 25, 2011 Author Posted April 25, 2011 What's the brand of the media you're using? Have you tried burning at 8x? Also you should avoid using the computer while burning, so that you're less likely to get buffer underruns. I'm using the newest version of Imgburn. I haven't tried burning at 8x because this happened when i tried 4x, and apparently I'm supposed to slow down the speed of my burn if it fails the first time (although Imgburn forces a minimum of 4x). And if it's just a buffer problem I'll be sure to take that advice next time.
LIGHTNING UK! Posted April 25, 2011 Posted April 25, 2011 It might be worth trying to clean the drive with a cleaning disc. Are those MCC discs actually Verbatim discs or are they branded by someone else? (mmalves did ask you that earlier) You could try getting some Taiyo Yuden (Victor JVC) DVD-R instead. ImgBurn doesn't force a minimum of 4x, your drive does - because that's all its firmware can support. Any reason why you haven't updated your installation of Vista to SP2?! You should get that done ASAP.
shadow ho-oh Posted April 26, 2011 Author Posted April 26, 2011 It might be worth trying to clean the drive with a cleaning disc. Are those MCC discs actually Verbatim discs or are they branded by someone else? (mmalves did ask you that earlier) You could try getting some Taiyo Yuden (Victor JVC) DVD-R instead. ImgBurn doesn't force a minimum of 4x, your drive does - because that's all its firmware can support. Any reason why you haven't updated your installation of Vista to SP2?! You should get that done ASAP. Ok I'll use a cleaning disc. About the brand of disc, I'm using Dynex DVD-R (i didnt understand his question) I want to avoid buying a whole new pack of DVDs, but I will if it comes down to that being the only solution. Um, am I supposed to receive notification of this update to SP2? Honestly, this is the first time I'm hearing of this update (and I feel like I dont know about a lot of things I should #39;( )
Cynthia Posted April 26, 2011 Posted April 26, 2011 Dynex discs are cheap ones and can be a bit of hit and miss. True Verbatims is a better card. http://windows.microsoft.com/en-US/windows-vista/Turn-automatic-updating-on-or-off Tells you how to enable the auto update of Windows. A higher burn/write speed might work better as suggested before.
shadow ho-oh Posted April 26, 2011 Author Posted April 26, 2011 Dynex discs are cheap ones and can be a bit of hit and miss. True Verbatims is a better card. http://windows.microsoft.com/en-US/windows-vista/Turn-automatic-updating-on-or-off Tells you how to enable the auto update of Windows. A higher burn/write speed might work better as suggested before. Ok well apparently I was unaware that the update was available (but my computer does have automatic update on). Also, unless I've been misinformed, doesn't a higher speed have a lower succession rate? I will try it anyways but please inform me if I am incorrect.
Cynthia Posted April 26, 2011 Posted April 26, 2011 Some burners like higher speeds = better quality. Some doesn't.
shadow ho-oh Posted April 26, 2011 Author Posted April 26, 2011 Ok well I just tried a burn with 8x speed. Made it past write stage and got stuck at 91% verification, which is when I received this message: I/O Error! Device: [1:0:0] TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 20 26 8A 00 00 01 00 Interpretation: Read(10) - Sector: 2107028 Sense Area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 00 00 00 00 Interpretation: Timeout on Logical Unit ^^This is the error I was referring to when I said that the burn made it past the writing stage twice. Here's my new log (my computer is still updating so its not going to say SP2): I 20:30:03 ImgBurn Version 2.5.5.0 started! I 20:30:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 20:30:03 Total Physical Memory: 1,038,208 KB - Available: 151,872 KB I 20:30:03 Initialising SPTI... I 20:30:03 Searching for SCSI / ATAPI devices... I 20:30:04 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) I 20:30:04 Found 1 DVD±RW/RAM! I 20:31:33 Operation Started! I 20:31:33 Source File: C:\Users\mommy\Downloads\Iso\wi-dbzbt3(compress).iso I 20:31:33 Source File Sectors: 2,294,912 (MODE1/2048) I 20:31:33 Source File Size: 4,699,979,776 bytes I 20:31:33 Source File Volume Identifier: Dragon Ball Z Budokai Tenkaichi 3 I 20:31:33 Source File File System(s): Special I 20:31:33 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) I 20:31:33 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x) I 20:31:33 Destination Media Sectors: 2,298,496 I 20:31:33 Write Mode: DVD I 20:31:33 Write Type: DAO I 20:31:33 Write Speed: 8x I 20:31:33 Link Size: Auto I 20:31:33 Lock Volume: No I 20:31:33 Test Mode: No I 20:31:33 OPC: No I 20:31:33 BURN-Proof: Enabled I 20:31:33 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 20:31:33 Filling Buffer... (40 MB) I 20:31:34 Writing LeadIn... I 20:32:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 20:32:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 20:40:44 Synchronising Cache... I 20:40:59 Exporting Graph Data... I 20:40:59 Graph Data File: C:\Users\mommy\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H652M_0414_MONDAY-APRIL-25-2011_8-31_PM_MCC_03RG20_8x.ibg I 20:40:59 Export Successfully Completed! I 20:40:59 Operation Successfully Completed! - Duration: 00:09:26 I 20:40:59 Average Write Rate: 8,877 KB/s (6.4x) - Maximum Write Rate: 11,144 KB/s (8.0x) I 20:40:59 Cycling Tray before Verify... W 20:41:06 Waiting for device to become ready... I 20:41:19 Device Ready! I 20:41:20 Operation Started! I 20:41:20 Source Device: [1:0:0] TSSTcorp CD/DVDW TS-H652M 0414 (E:) (ATA) I 20:41:20 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x) I 20:41:20 Image File: C:\Users\mommy\Downloads\Iso\wi-dbzbt3(compress).iso I 20:41:20 Image File Sectors: 2,294,912 (MODE1/2048) I 20:41:20 Image File Size: 4,699,979,776 bytes I 20:41:20 Image File Volume Identifier: Dragon Ball Z Budokai Tenkaichi 3 I 20:41:20 Image File File System(s): Special I 20:41:20 Read Speed (Data/Audio): MAX / MAX I 20:41:20 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 20:41:20 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 20:48:40 Failed to Read Sector 2107018 - Reason: Timeout on Logical Unit W 20:48:46 Retrying (1)... W 20:48:53 Retry Failed - Reason: Timeout on Logical Unit W 20:48:55 Retrying (2)... W 20:49:02 Retry Failed - Reason: Timeout on Logical Unit W 20:49:03 Retrying (3)... W 20:49:10 Retry Failed - Reason: Timeout on Logical Unit W 20:49:15 Retrying (4)... W 20:49:22 Retry Failed - Reason: Timeout on Logical Unit W 20:56:02 Failed to Read Sector 2107018 - Reason: Timeout on Logical Unit W 20:56:10 Failed to Read Sector 2107019 - Reason: Timeout on Logical Unit E 20:56:14 Failed to Read Sector 2107019 - Reason: Timeout on Logical Unit E 20:56:14 Failed to Verify Sectors! I 20:56:14 Exporting Graph Data... I 20:56:14 Graph Data File: C:\Users\mommy\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H652M_0414_MONDAY-APRIL-25-2011_8-31_PM_MCC_03RG20_8x.ibg I 20:56:15 Export Successfully Completed! E 20:56:15 Operation Failed! - Duration: 00:14:54 I 20:56:15 Average Verify Rate: 4,713 KB/s (3.4x) - Maximum Verify Rate: 24,563 KB/s (17.7x) So basically if my write is successful, my verification will not be.
Cynthia Posted April 26, 2011 Posted April 26, 2011 Yes, even if the burner reports that the burn part is ok, it can still be so crappy that the burner can't read what it just burned.
shadow ho-oh Posted April 28, 2011 Author Posted April 28, 2011 Well I don't think the fact that the disk is Dynex has anything to do with it because I've been using them for almost a year, and I never got this problem.
LIGHTNING UK! Posted April 28, 2011 Posted April 28, 2011 Unless you try some others, you'll never really know for sure.
Recommended Posts