t3sla Posted April 29, 2011 Posted April 29, 2011 (edited) Whenever I try to burn something onto a dual layer disc, it never works with 2.4x, but when I use 4x, the first layer works, but when it's finished with the first layer, it always fails at the transfer. Its speed plops down to 0.0x, and just stops. I'm using an _NEC 3550a, with firmware version 1.y6. I've tried using a cleaning disc (memorex 08003), it spins in the drive, but doesn't get read by my dvd drive, so I'm not sure if it works. Extra info: Trying to burn a backup of Portal 2, and Fallout NV (x360). 2.4x log (fails on LeadIn): I 19:33:57 ImgBurn Version 2.5.5.0 started! I 19:33:57 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 19:33:57 Total Physical Memory: 6,290,616 KB - Available: 4,526,776 KB I 19:33:57 Initialising SPTI... I 19:33:57 Searching for SCSI / ATAPI devices... I 19:33:57 -> Drive 1 - Info: _NEC DVD_RW ND-3550A 1.Y6 (D:) (ATA) I 19:33:57 Found 1 DVD±RW! I 19:34:51 Operation Started! I 19:34:51 Source File: E:\x360games\Fallout NV\mvl-fnvf.dvd I 19:34:51 Source File Sectors: 3,827,488 (MODE1/2048) I 19:34:51 Source File Size: 7,838,695,424 bytes I 19:34:51 Source File Volume Identifier: DVD_ROM I 19:34:51 Source File Volume Set Identifier: ec67c000MS UDFBridge I 19:34:51 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:34:51 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:34:51 Source File File System(s): ISO9660, UDF (1.50) I 19:34:51 Destination Device: [2:0:0] _NEC DVD_RW ND-3550A 1.Y6 (D:) (ATA) I 19:34:51 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 19:34:51 Destination Media Sectors: 3,827,520 I 19:34:51 Write Mode: DVD I 19:34:51 Write Type: DAO I 19:34:51 Write Speed: 2.4x I 19:34:51 Link Size: Auto I 19:34:51 Lock Volume: Yes I 19:34:51 Test Mode: No I 19:34:51 OPC: No I 19:34:51 BURN-Proof: Enabled I 19:34:51 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 19:34:51 Book Type Setting: DVD-ROM I 19:34:51 User Specified L0 Data Zone Capacity: 1,913,760 I 19:34:51 Set L0 Data Zone Capacity Succeeded! I 19:34:52 Filling Buffer... (40 MB) I 19:34:52 Writing LeadIn... W 19:35:25 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 19:35:25 Retrying (1 of 20)... W 19:36:01 Retry Failed - Reason: Power Calibration Area Error W 19:36:01 Retrying (2 of 20)... W 19:36:33 Retry Failed - Reason: Power Calibration Area Error W 19:36:33 Retrying (3 of 20)... W 19:37:10 Retry Failed - Reason: Power Calibration Area Error W 19:37:10 Retrying (4 of 20)... W 19:37:43 Retry Failed - Reason: Power Calibration Area Error W 19:37:43 Retrying (5 of 20)... W 19:38:16 Retry Failed - Reason: Power Calibration Area Error W 19:38:16 Retrying (6 of 20)... W 19:38:48 Retry Failed - Reason: Power Calibration Area Error W 19:38:48 Retrying (7 of 20)... W 19:39:21 Retry Failed - Reason: Power Calibration Area Error W 19:39:21 Retrying (8 of 20)... W 19:39:54 Retry Failed - Reason: Power Calibration Area Error W 19:39:54 Retrying (9 of 20)... W 19:40:21 Retry Failed - Reason: Power Calibration Area Error W 19:40:21 Retrying (10 of 20)... W 19:40:54 Retry Failed - Reason: Power Calibration Area Error W 19:40:54 Retrying (11 of 20)... W 19:41:28 Retry Failed - Reason: Power Calibration Area Error W 19:41:28 Retrying (12 of 20)... W 19:42:01 Retry Failed - Reason: Power Calibration Area Error W 19:42:01 Retrying (13 of 20)... W 19:42:34 Retry Failed - Reason: Power Calibration Area Error W 19:42:34 Retrying (14 of 20)... W 19:43:08 Retry Failed - Reason: Power Calibration Area Error W 19:43:08 Retrying (15 of 20)... W 19:43:42 Retry Failed - Reason: Power Calibration Area Error W 19:43:43 Retrying (16 of 20)... W 19:44:15 Retry Failed - Reason: Power Calibration Area Error W 19:44:15 Retrying (17 of 20)... W 19:44:48 Retry Failed - Reason: Power Calibration Area Error W 19:44:48 Retrying (18 of 20)... I 19:44:54 Abort Request Acknowledged W 19:45:22 Retry Failed - Reason: Power Calibration Area Error E 19:45:22 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 19:45:22 Synchronising Cache... I 19:45:25 Closing Track... I 19:45:26 Finalising Disc... E 19:45:27 Failed to Write Image! E 19:45:27 Operation Aborted! - Duration: 00:10:35 I 19:45:27 Average Write Rate: N/A - Maximum Write Rate: N/A For some reason i can't find my 4x log, but I don't feel like wasting another verbatim, as I've already coastered 11/20 (D:!!) Edited April 29, 2011 by t3sla
LIGHTNING UK! Posted April 29, 2011 Posted April 29, 2011 Now might be a good time to invest in a new drive.
t3sla Posted April 29, 2011 Author Posted April 29, 2011 What drive would you recommend? I'm kindof broke xP
Recommended Posts