verbatim

[Bridson]

i finally got the verbatim discs dvd + dual layer 8x

 

i burned the game at 6 x as i couldnt burn any lower

 

and when i put disc in my xbox it just sais open tray

 

here is the log and hope someone can help maybe had the same problem and fixed this

 

thanks in advance.

 

 

 

I 12:08:23 ImgBurn Version 2.5.5.0 started!

I 12:08:23 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 12:08:23 Total Physical Memory: 8,387,704 KB - Available: 6,912,096 KB

W 12:08:23 Drive F:\ (FAT32) does not support single files > 4 GB in size.

W 12:08:23 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 12:08:23 Initialising SPTI...

I 12:08:23 Searching for SCSI / ATAPI devices...

I 12:08:23 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)

I 12:08:23 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S222A SB02 (D:) (ATA)

I 12:08:23 Found 1 DVD±RW/RAM and 1 BD-ROM!

I 12:12:40 Operation Started!

I 12:12:40 Source File: C:\Users\10ak\Downloads\gta4-digi\gta4-digi.dvd

I 12:12:40 Source File Sectors: 3,825,924 (MODE1/2048)

I 12:12:40 Source File Size: 7,835,492,352 bytes

I 12:12:40 Source File Volume Identifier: XGD2DVD_NTSC

I 12:12:40 Source File Volume Set Identifier: 34672923

I 12:12:40 Source File Implementation Identifier: Sonic Scenarist 3.1

I 12:12:40 Source File File System(s): ISO9660, UDF (1.02)

I 12:12:40 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-S222A SB02 (D:) (ATA)

I 12:12:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x)

I 12:12:40 Destination Media Sectors: 4,173,824

I 12:12:40 Write Mode: DVD

I 12:12:40 Write Type: DAO

I 12:12:40 Write Speed: 6x

I 12:12:40 Link Size: Auto

I 12:12:40 Lock Volume: Yes

I 12:12:40 Test Mode: No

I 12:12:40 OPC: No

I 12:12:40 BURN-Proof: Enabled

I 12:12:40 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)

I 12:12:40 Book Type Setting: DVD-ROM

I 12:12:40 User Specified L0 Data Zone Capacity: 1,913,760

I 12:13:24 Set L0 Data Zone Capacity Succeeded!

I 12:13:25 Filling Buffer... (40 MB)

I 12:13:27 Writing LeadIn...

I 12:13:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 12:13:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 12:13:32 Writing Layer 0... (LBA: 0 - 1913759)

I 12:21:23 Writing Layer 1... (LBA: 1913760 - 3825923)

I 12:29:49 Synchronising Cache...

I 12:29:58 Closing Track...

I 12:30:03 Finalising Disc...

I 12:30:40 Exporting Graph Data...

I 12:30:40 Graph Data File: C:\Users\10ak\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S222A_SB02_23-MAY-2011_12-12_MKM-003-00_6x.ibg

[ianymaty]

I 12:12:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x)

 

The drive can burn that disc slower but is not that the problem.

 

The log don't show the verify part.

 

Burn again and enable verify, only then you will know that the disc is readable, at least in that drive.

 

Probably you will have to try burn faster rather than slower.

[Bridson]

I 12:12:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x)

 

The drive can burn that disc slower but is not that the problem.

 

The log don't show the verify part.

 

Burn again and enable verify, only then you will know that the disc is readable, at least in that drive.

 

Probably you will have to try burn faster rather than slower.

 

 

i enabled verify and got the little melody telling me it was finished.so i should try at 8x speed?

[LIGHTNING UK!]

http://forum.imgburn.com/index.php?showtopic=12200