Stuck at "Setting L0 Data Zone Capacity"

[nour12344]

Hi, this is my first time trying to burn a DL disc, and I'm having problems....

 

I've heard I should get Verbatim (or w/e they're spelled) discs as they have the best results, but before I do that I want to make sure there's nothing wrong with my drive....

 

It's a MATSHITA DVD-RAM UJ-842S ATA DEVICE according to my device manager. Whenever I write image to disc (after I set the layer thingy according to my .dvd file to 1913760) it gets stuck at "setting L0 Data zone capacity".. here is the log :

 

 

I 20:02:19 ImgBurn Version 2.5.5.0 started!

I 20:02:19 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1)

I 20:02:19 Total Physical Memory: 2,612,472 KB - Available: 1,692,308 KB

I 20:02:19 Initialising SPTI...

I 20:02:19 Searching for SCSI / ATAPI devices...

I 20:02:24 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-842S 1.01 (D:) (ATA)

I 20:02:24 Found 1 DVD±RW/RAM!

I 20:03:20 Operation Started!

I 20:03:20 Source File: E:\Games\RDR\RDR - 2010 - GuruFuel.com\silvrrd.dvd

I 20:03:20 Source File Sectors: 3,827,488 (MODE1/2048)

I 20:03:20 Source File Size: 7,838,695,424 bytes

I 20:03:20 Source File Volume Identifier: DVD_ROM

I 20:03:20 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 20:03:20 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:03:20 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:03:20 Source File File System(s): ISO9660, UDF (1.50)

I 20:03:20 Destination Device: [1:0:0] MATSHITA DVD-RAM UJ-842S 1.01 (D:) (ATA)

I 20:03:20 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

I 20:03:20 Destination Media Sectors: 4,173,824

I 20:03:20 Write Mode: DVD

I 20:03:20 Write Type: DAO

I 20:03:20 Write Speed: 2.4x

I 20:03:20 Link Size: Auto

I 20:03:20 Lock Volume: Yes

I 20:03:20 Test Mode: No

I 20:03:20 OPC: No

I 20:03:20 BURN-Proof: Enabled

I 20:03:20 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 20:03:20 User Specified L0 Data Zone Capacity: 1,913,760

 

 

and it's been like that for the past 32 minutes...and this is the second time I try this, what am I doing wrong? or can my drive just not burn DL discs? or is this my discs fault and it would work fine on a verbatim disc? thanks in advance for any replies..

[LIGHTNING UK!]

You should just try some 2.4x and/or 8x speed Verbatim DL discs regardless.