Is my drive bad?

[jgates0923]

Whenever I write to dual layer discs, imgburn tells me it was unable to set Layer Break. I am not using cheap media, but not verbatim either. I am receiving this error with TDK and Memorex dual layer DVDs. I have done some research on this problem, and I've read it could be bad media, bad relationship between my drive and these DVD's, or a bad drive. My question is how do I tell which one it is. I don't think my drive is bad because it burns single layer DVD's correctly every time. I have also burned dual layer media in the past with a few errors here and there, but I have never not been able to burn even a single disc like this. I am open to trying verbatim, but I figured I would post here first because I don't much want to spend 75 dollars on 50 printable discs to have the same problem. Here is the log from imgburn. Thanks in advance for any help you can provide.

 

 

I 17:01:57 ImgBurn Version 2.5.5.0 started!

I 17:01:57 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 17:01:57 Total Physical Memory: 8,376,824 KB - Available: 6,446,580 KB

W 17:01:59 Drive Z:\ (FAT) might not support single files > 4 GB in size.

I 17:01:59 Initialising SPTI...

I 17:01:59 Searching for SCSI / ATAPI devices...

I 17:01:59 -> Drive 1 - Info: HL-DT-ST DVDRWBD CA10N A110 (D:) (ATAPI)

I 17:01:59 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (F:) (Unknown)

I 17:01:59 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown)

I 17:01:59 Found 2 DVD-ROMs and 1 BD-ROM/DVD±RW!

I 17:02:18 Operation Started!

I 17:02:18 Source File: G:\DVD Backups\American History X.mds

I 17:02:18 Source File Sectors: 3,879,552 (MODE1/2048)

I 17:02:18 Source File Size: 7,945,322,496 bytes

I 17:02:18 Source File Volume Identifier: American History X

I 17:02:18 Source File Volume Set Identifier: 3EC6831A003B3260

I 17:02:18 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER!

I 17:02:18 Source File Implementation Identifier: ImgBurn

I 17:02:19 Source File File System(s): ISO9660, UDF (1.02)

I 17:02:19 Destination Device: [0:1:0] HL-DT-ST DVDRWBD CA10N A110 (D:) (ATAPI)

I 17:02:19 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x)

I 17:02:19 Destination Media Sectors: 4,173,824

I 17:02:19 Write Mode: DVD

I 17:02:19 Write Type: DAO

I 17:02:19 Write Speed: AWS

I 17:02:19 Link Size: Auto

I 17:02:19 Lock Volume: Yes

I 17:02:19 Test Mode: No

I 17:02:19 OPC: No

I 17:02:19 BURN-Proof: Enabled

I 17:02:19 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 17:02:19 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

I 17:02:19 Optimal L0 Data Zone Capacity: 1,997,584

I 17:02:19 Optimal L0 Data Zone Method: Copied From Original Disc

E 17:05:21 Set L0 Data Zone Capacity Failed! - Reason: The request could not be performed because of an I/O device error.

E 17:11:22 Operation Failed! - Duration: 00:03:02

I 17:11:22 Average Write Rate: N/A - Maximum Write Rate: N/A

[ianymaty]

Read this http://forum.imgburn.com/index.php?showtopic=8000

[LIGHTNING UK!]

http://www.google.co.uk/search?hl=en&q=site%3Aforum.imgburn.com+The+request+could+not+be+performed+because+of+an+I%2FO+device+error.&meta=