Is my burner dead?

[Grievy]

I've been trying to burn a few disks today. IMGburn goes through the motions but the disks still come out blank. I'm assuming the drive is dead and needs replacing.

 

I've enclosed a log below, it's full of error messages :S

 

 

http://paste2.org/p/1470602

[LIGHTNING UK!]

Post another log WITHOUT debug mode enabled please. (debug mode enabled logs are only required when specifically asked for)

 

Make sure it actually includes you burning and verifying a disc that you then think is still blank

[Grievy]

Post another log WITHOUT debug mode enabled please. (debug mode enabled logs are only required when specifically asked for)

 

Make sure it actually includes you burning and verifying a disc that you then think is still blank

 

You'll have to excuse my ignorance, but how do I exit debug mode?

 

I wasn't aware it was turned on and can't find anything in the settings panel.

[Cynthia]

F8

[Grievy]

F8

 

Thanks Cynthia, got it. Will try a new burn now and post the log.

[LIGHTNING UK!]

You must have imported a reg file to turn it on because it turns itself off every time you close the program.

[Grievy]

Yeah I found a reg file linked on a forum where someone was having a similar problem.

 

I've got a new log now. I'm no expert but I'm assuming the fact that Imgburn says it's all worked means the drive is dead.

 

 

I 00:58:51 ImgBurn Version 2.5.5.0 started!

I 00:58:51 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

I 00:58:51 Total Physical Memory: 2,881,904 KB - Available: 1,221,380 KB

W 00:58:51 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 00:58:51 Initialising SPTI...

I 00:58:51 Searching for SCSI / ATAPI devices...

I 00:58:51 -> Drive 1 - Info: CZYHE 01EZW9A 1.03 (E:) (SCSI)

I 00:58:53 -> Drive 2 - Info: TSSTcorp CDDVDW TS-L633B AC02 (D:) (SATA)

I 00:58:53 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 00:59:43 Operation Started!

I 00:59:43 Source File: C:\Users\Sam\Downloads\wizard\Duke Nukem Forever - Xbox360 - Complex - Antichris\cpx-duke.dvd

I 00:59:43 Source File Sectors: 3,827,488 (MODE1/2048)

I 00:59:43 Source File Size: 7,838,695,424 bytes

I 00:59:43 Source File Volume Identifier: DVD_ROM

I 00:59:43 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 00:59:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:59:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:59:43 Source File File System(s): ISO9660, UDF (1.50)

I 00:59:43 Destination Device: [0:0:0] TSSTcorp CDDVDW TS-L633B AC02 (D:) (SATA)

I 00:59:43 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 00:59:43 Destination Media Sectors: 4,173,824

I 00:59:43 Write Mode: DVD

I 00:59:43 Write Type: DAO

I 00:59:43 Write Speed: 2.4x

I 00:59:43 Link Size: Auto

I 00:59:43 Lock Volume: Yes

I 00:59:43 Test Mode: No

I 00:59:43 OPC: No

I 00:59:43 BURN-Proof: Enabled

W 00:59:45 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x)

I 00:59:45 Book Type Setting: N/A (Reason: The request could not be performed because of an I/O device error.)

I 00:59:45 Optimal L0 Data Zone Capacity: 1,913,760

I 00:59:45 Optimal L0 Data Zone Method: Copied From Original Disc

I 01:00:05 Set L0 Data Zone Capacity Succeeded!

I 01:00:05 Filling Buffer... (40 MB)

I 01:00:06 Writing LeadIn...

I 01:00:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 01:00:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 01:00:29 Writing Layer 0... (LBA: 0 - 1913759)

I 01:16:08 Writing Layer 1... (LBA: 1913760 - 3827487)

I 01:32:28 Synchronising Cache...

I 01:32:47 Closing Track...

I 01:33:06 Finalising Disc...

I 01:34:04 Exporting Graph Data...

I 01:34:05 Graph Data File: C:\Users\Sam\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633B_AC02_15-JUNE-2011_00-59_MKM-003-00_2.4x.ibg

I 01:34:05 Export Successfully Completed!

I 01:34:05 Operation Successfully Completed! - Duration: 00:34:21

I 01:34:05 Average Write Rate: 3,991 KB/s (2.9x) - Maximum Write Rate: 4,231 KB/s (3.1x)

I 01:34:05 Cycling Tray before Verify...

W 01:34:34 Waiting for device to become ready...

I 01:34:59 Device Ready!

E 01:34:59 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)

E 01:34:59 Verify Failed! - Reason: Layouts do not match.

[LIGHTNING UK!]

There are some suggestions in this thread:

 

http://forum.imgburn.com/index.php?showtopic=8000

 

(Ignore the main point about using Verbatim media, obviously you already are)