Alazir Posted June 17, 2011 Share Posted June 17, 2011 Hi everyone! I am using ImgBurn v2.5.5.0 and v2.5.2.0 (still not updated on this computer) on Windows 7 64-bit and I have a problem with command line switches. Everything work as expected except those two switches /VERIFY and /LAYERBREAK. Here is my command line (I removed all the others switches which work): ImgBurn /MODE WRITE /SRC "MyISO.iso" /VERIFY YES /LAYERBREAK 1913760 ImgBurn should normally sets "verify on" but it does nothing (Same thing for build mode). It should also changes the settings under Write/Options/Layer Break(For DL Media) from Calculate Optimal to User Specified -> Sectors in L0=1913760 But it does nothing, the settings remain on Calculate Optimal So here is my question, does my command line is correct? Hope someone will point my mistake Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 17, 2011 Share Posted June 17, 2011 The CLI options don't always change what you see in the GUI in terms of boxes being checked/filled out etc. Link to comment Share on other sites More sharing options...
Alazir Posted June 17, 2011 Author Share Posted June 17, 2011 So you mean even if it is not visible in the GUI, the switches are activated? That's great! Thanks LIGHTNING UK! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 17, 2011 Share Posted June 17, 2011 Correct. The CLI stuff just overrides the GUI stuff when it needs to. Link to comment Share on other sites More sharing options...
Recommended Posts