PODDY Posted June 23, 2011 Share Posted June 23, 2011 DUAL LAYER BURNS OK LAYER 1 WORKS FINE LAYER 2 FREEZES I HAVE A LITEON AND THE MEDIA WORKS FINE Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 23, 2011 Share Posted June 23, 2011 That's great. Now, did you actually have a question? If so, perhaps you'd be so kind as to provide us with a useful amount of information. You could start by posting a log - as per the pink box up the top Link to comment Share on other sites More sharing options...
PODDY Posted June 23, 2011 Author Share Posted June 23, 2011 That's great. Now, did you actually have a question? If so, perhaps you'd be so kind as to provide us with a useful amount of information. You could start by posting a log - as per the pink box up the top sorry mate i am new to this i have no log my question was why would one burner work fine and the LG with the same kodak DL media skip and jump when played in 2nd layer change where as the disc burnt on the LITEON works FINE using FAB with IMAGE BURN at 4 X Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 23, 2011 Share Posted June 23, 2011 All drives perform differently with different discs. I guess your LiteOn just does a better job of burning whatever dye/mid the kodak media uses than the LG does when burning at 4x. You might have more luck with the LG at a different speed - if any others are actually available. Do you have the latest firmware installed for the LG? Right click the drive selection drop down box in ImgBurn and have it check for firmware updates for it. Link to comment Share on other sites More sharing options...
Recommended Posts