dlbott Posted June 24, 2011 Posted June 24, 2011 I am using image burn to make backups of game discs. I have burned successfully in past. Recently I started getting error on setting the landing zone. It says something about failing setting power or something like that. I can burn data, movies, audio with this burner with no problems. I can burn the same files over the network to another burner so there is nothing wrong with the files. I am wondering if you have any thoughts. is there maybe a setting that has gotten off or do i need another version or something... thanks
LIGHTNING UK! Posted June 24, 2011 Posted June 24, 2011 Post the log please - as per the pink box up the top. Have a read of this too please so we don't end up wasting time later on. http://forum.imgburn.com/index.php?showtopic=8000
dlbott Posted June 27, 2011 Author Posted June 27, 2011 Post the log please - as per the pink box up the top. Have a read of this too please so we don't end up wasting time later on. http://forum.imgburn.com/index.php?showtopic=8000 had no pink box but here is what the error was... 15:12:25 BURN-Proof: Enabled I 15:12:25 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 15:12:25 Book Type Setting: DVD-ROM I 15:12:25 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 15:12:25 User Specified L0 Data Zone Capacity: 1,913,760 W 15:12:47 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 15:12:47 Retrying (1)... E 15:13:45 Set L0 Data Zone Capacity Failed! - Reason: Session Fixation Error E 15:13:45 Operation Failed! - Duration: 00:01:20 I 15:13:45 Average Write Rate: N/A - Maximum Write Rate: N/A I 15:13:47 Close Request Acknowledged I 15:13:47 Closing Down... I 15:13:47 Shutting down SPTI... I 15:13:47 ImgBurn closed! I could buy the media bit but i can burn everything else to it using same burner with different software. the same files burn over the network to the cheap media so something is going on besides media. any ideas...
LIGHTNING UK! Posted June 27, 2011 Posted June 27, 2011 Post the entire log for that session please, not just a snippet. Whatever you might think, this is drive/firmware/media combo issue. Nothing else even comes into it.
dlbott Posted June 28, 2011 Author Posted June 28, 2011 Hey, thanks for your help. I guess I am really just confused by it all. I know the media is not the best. I live in the country with no electronic stores and the memorex/ which is actually ritek is all i can get. My only problem is i have always used this media, even though it is junk, and never had any problem before. If there was a problem with the drive I should see it while burning other types of files as well. It should be consistent. Maybe you are right, maybe I need new firmware, but that does not really make sense either, why would it start all of the sudden. Anyway, I appreciate your help. I can burn over the network, it is just a pain, lol. Here is the whole file, hope it fits. Thanks for trying to help me.. ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Monday, 27 June 2011, 00:24:54 ; \\****************************************// ; ; I 00:12:50 ImgBurn Version 2.5.1.0 started! I 00:12:50 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 00:12:50 Total Physical Memory: 1,505,848 KB - Available: 396,440 KB W 00:12:50 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 00:12:50 Initialising SPTI... I 00:12:50 Searching for SCSI / ATAPI devices... I 00:12:51 -> Drive 1 - Info: LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 00:12:51 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (F:) (ATA) I 00:12:51 Found 1 DVD-ROM and 1 DVD±RW! I 00:24:53 Close Request Acknowledged I 00:24:53 Closing Down... I 00:24:54 Shutting down SPTI... I 00:24:54 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Friday, 24 June 2011, 10:44:49 ; \\****************************************// ; ; I 10:35:25 ImgBurn Version 2.5.1.0 started! I 10:35:25 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 10:35:25 Total Physical Memory: 1,505,848 KB - Available: 502,328 KB W 10:35:25 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 10:35:25 Initialising SPTI... I 10:35:25 Searching for SCSI / ATAPI devices... I 10:35:25 -> Drive 1 - Info: LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 10:35:25 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (F:) (ATA) I 10:35:25 Found 1 DVD-ROM and 1 DVD±RW! I 10:43:11 Operation Started! I 10:43:11 Source File: C:\ripped_xbox 360 games\cpx-tdotm_vol53+00_par2\cpx-tdotm.dvd I 10:43:11 Source File Sectors: 3,827,488 (MODE1/2048) I 10:43:11 Source File Size: 7,838,695,424 bytes I 10:43:11 Source File Volume Identifier: DVD_ROM I 10:43:11 Source File Volume Set Identifier: d0a44000MS UDFBridge I 10:43:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:43:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:43:11 Source File File System(s): ISO9660, UDF (1.50) I 10:43:11 Destination Device: [3:0:0] LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 10:43:11 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 10:43:11 Destination Media Sectors: 4,173,824 I 10:43:11 Write Mode: DVD I 10:43:11 Write Type: DAO I 10:43:11 Write Speed: 2.4x I 10:43:11 Link Size: Auto I 10:43:11 Lock Volume: Yes I 10:43:11 Test Mode: No I 10:43:11 OPC: No I 10:43:11 BURN-Proof: Enabled I 10:43:11 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 10:43:11 Book Type Setting: DVD-ROM I 10:43:11 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 10:43:11 User Specified L0 Data Zone Capacity: 1,913,760 E 10:44:47 Set L0 Data Zone Capacity Failed! - Reason: Session Fixation Error E 10:44:47 Operation Failed! - Duration: 00:01:35 I 10:44:47 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:44:48 Close Request Acknowledged I 10:44:48 Closing Down... I 10:44:49 Shutting down SPTI... I 10:44:49 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Tuesday, 21 June 2011, 20:18:23 ; \\****************************************// ; ; I 19:07:20 ImgBurn Version 2.5.1.0 started! I 19:07:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 19:07:20 Total Physical Memory: 1,505,848 KB - Available: 809,924 KB W 19:07:20 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 19:07:20 Initialising SPTI... I 19:07:20 Searching for SCSI / ATAPI devices... I 19:07:20 -> Drive 1 - Info: LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 19:07:20 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (F:) (ATA) I 19:07:20 Found 1 DVD-ROM and 1 DVD±RW! I 19:07:46 Operation Started! I 19:07:46 Source File: C:\Users\don\Desktop\cpx-duke_par2\cpx-duke1.dvd I 19:07:46 Source File Sectors: 3,827,488 (MODE1/2048) I 19:07:46 Source File Size: 7,838,695,424 bytes I 19:07:46 Source File Volume Identifier: DVD_ROM I 19:07:46 Source File Volume Set Identifier: d0a44000MS UDFBridge I 19:07:46 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:07:46 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:07:46 Source File File System(s): ISO9660, UDF (1.50) I 19:07:46 Destination Device: [3:0:0] LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 19:07:46 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 19:07:46 Destination Media Sectors: 4,173,824 I 19:07:46 Write Mode: DVD I 19:07:46 Write Type: DAO I 19:07:46 Write Speed: 2.4x I 19:07:46 Link Size: Auto I 19:07:46 Lock Volume: Yes I 19:07:46 Test Mode: No I 19:07:46 OPC: No I 19:07:46 BURN-Proof: Enabled I 19:07:46 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 19:07:46 Book Type Setting: DVD-ROM I 19:07:46 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 19:07:46 User Specified L0 Data Zone Capacity: 1,913,760 W 19:10:12 Set L0 Data Zone Capacity Failed! - Reason: Session Fixation Error W 19:10:12 Retrying (1)... W 19:10:43 Set L0 Data Zone Capacity Failed! - Reason: Session Fixation Error I 19:10:44 Filling Buffer... (100 MB) I 19:10:47 Writing LeadIn... I 19:10:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:10:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:10:49 Writing Layer 0... (LBA: 0 - 2086911) I 19:32:01 Writing Layer 1... (LBA: 2086912 - 3827487) I 19:49:42 Synchronising Cache... I 19:49:43 Closing Track... I 19:49:45 Finalising Disc... I 19:54:21 Exporting Graph Data... I 19:54:21 Graph Data File: C:\Users\don\AppData\Roaming\ImgBurn\Graph Data Files\LITE-ON_DVDRW_SOHW-1633S_BS0C_TUESDAY-JUNE-21-2011_7-07_PM_RITEK-S04-66_2.4x.ibg I 19:54:21 Export Successfully Completed! I 19:54:21 Operation Successfully Completed! - Duration: 00:46:35 I 19:54:21 Average Write Rate: 3,282 KB/s (2.4x) - Maximum Write Rate: 3,409 KB/s (2.5x) I 20:18:23 Close Request Acknowledged I 20:18:23 Closing Down... I 20:18:23 Shutting down SPTI... I 20:18:23 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Tuesday, 21 June 2011, 15:13:47 ; \\****************************************// ; ; I 15:12:07 ImgBurn Version 2.5.1.0 started! I 15:12:07 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:12:07 Total Physical Memory: 1,505,848 KB - Available: 681,412 KB W 15:12:07 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 15:12:07 Initialising SPTI... I 15:12:07 Searching for SCSI / ATAPI devices... I 15:12:07 -> Drive 1 - Info: LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 15:12:07 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (F:) (ATA) I 15:12:07 Found 1 DVD-ROM and 1 DVD±RW! I 15:12:25 Operation Started! I 15:12:25 Source File: C:\Users\don\Documents\cpx-duke_par2\cpx-duke.dvd I 15:12:25 Source File Sectors: 3,827,488 (MODE1/2048) I 15:12:25 Source File Size: 7,838,695,424 bytes I 15:12:25 Source File Volume Identifier: DVD_ROM I 15:12:25 Source File Volume Set Identifier: d0a44000MS UDFBridge I 15:12:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:12:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:12:25 Source File File System(s): ISO9660, UDF (1.50) I 15:12:25 Destination Device: [3:0:0] LITE-ON DVDRW SOHW-1633S BS0C (E:) (ATA) I 15:12:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 15:12:25 Destination Media Sectors: 4,173,824 I 15:12:25 Write Mode: DVD I 15:12:25 Write Type: DAO I 15:12:25 Write Speed: 2.4x I 15:12:25 Link Size: Auto I 15:12:25 Lock Volume: Yes I 15:12:25 Test Mode: No I 15:12:25 OPC: No I 15:12:25 BURN-Proof: Enabled I 15:12:25 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 15:12:25 Book Type Setting: DVD-ROM I 15:12:25 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 15:12:25 User Specified L0 Data Zone Capacity: 1,913,760 W 15:12:47 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 15:12:47 Retrying (1)... E 15:13:45 Set L0 Data Zone Capacity Failed! - Reason: Session Fixation Error E 15:13:45 Operation Failed! - Duration: 00:01:20 I 15:13:45 Average Write Rate: N/A - Maximum Write Rate: N/A I 15:13:47 Close Request Acknowledged I 15:13:47 Closing Down... I 15:13:47 Shutting down SPTI... I 15:13:47 ImgBurn closed!
LIGHTNING UK! Posted June 28, 2011 Posted June 28, 2011 Your version of ImgBurn is out of date - old versions are not supported. Your firmware is way out of date. Get the latest version from here: http://www.firmwarehq.com/Lite-On/SOHW-1633S/files.html That RITEK-S04-66 dye hadn't even been invented when your drive/firmware were created so no wonder it can't burn them. It's probably about time you got a new drive.
Recommended Posts