Trouble reading DVD+R, incorrect data size

[weetoots]

I have a group of DVD-R, Verbatim, Book type DVD-Rom, that I am trying to copy. When I read the disc, which has about 4,480,00 apprx of mpeg data, in three files, Imgburn would have no problem writing the data as a .bin file with .mds file. This worked fine for two but now when I read a disc of about the same size, it builds a .bin file that is almost twice as big and therefore reports that the data is too much to write on the new disc.

 

What's happening? I have the latest build. Default settings. It did work fine. I used the "read" mode.

 

 

I 01:30:09 ImgBurn Version 2.5.5.0 started!

I 01:30:09 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 01:30:09 Total Physical Memory: 4,193,336 KB - Available: 2,731,648 KB

I 01:30:09 Initialising SPTI...

I 01:30:09 Searching for SCSI / ATAPI devices...

I 01:30:09 -> Drive 1 - Info: Optiarc DVD RW AD-7241S 1.03 (H:) (ATA)

I 01:30:09 -> Drive 2 - Info: TOSHIBA CDW/DVD SD-R1612 TB01 (E:) (RAID)

I 01:30:09 Found 1 DVD-ROM/CD-RW and 1 DVD±RW/RAM!

I 01:31:43 Operation Started!

I 01:31:43 Source Device: [0:1:0] Optiarc DVD RW AD-7241S 1.03 (H:) (ATA)

I 01:31:43 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x)

I 01:31:44 Source Media Sectors: 2,042,496 (Track Path: PTP)

I 01:31:44 Source Media Size: 4,183,031,808 bytes

I 01:31:44 Source Media Volume Identifier: Big Brother 7

I 01:31:44 Source Media Volume Set Identifier: 34FA2628CB05D9D7

I 01:31:44 Source Media Application Identifier: Nero Burning ROM

I 01:31:44 Source Media Implementation Identifier: Nero

I 01:31:44 Source Media File System(s): ISO9660, Joliet, UDF (1.02)

I 01:31:44 Read Speed (Data/Audio): MAX / 8x

I 01:31:44 Destination File: C:\Users\Al\Documents\Big Brother 7.bin

I 01:31:44 Destination Free Space: 408,193,884,160 Bytes (398,626,840 KB) (389,284 MB) (380 GB)

I 01:31:44 Destination File System: NTFS

I 01:31:44 File Splitting: Auto

I 01:31:50 Reading Session 1 of 3... (1 Track, LBA: 0 - 620559)

I 01:31:50 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 620559)

I 01:33:42 Reading Session 2 of 3... (1 Track, LBA: 0 - 741343)

I 01:33:42 Reading Track 1 of 1... (MODE1/2048, LBA: 622608 - 1363951)

I 01:37:08 Reading Session 3 of 3... (1 Track, LBA: 0 - 676495)

I 01:37:08 Reading Track 1 of 1... (MODE1/2048, LBA: 1366000 - 2042495)

I 01:41:38 Exporting Graph Data...

I 01:41:38 Graph Data File: C:\Users\Al\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_SATURDAY-JULY-09-2011_1-31_AM_MCC-004-00.ibg

I 01:41:38 Export Successfully Completed!

I 01:41:38 Operation Successfully Completed! - Duration: 00:09:54

I 01:41:38 Average Read Rate: 6,877 KB/s (5.0x) - Maximum Read Rate: 18,126 KB/s (13.1x)

 

.Bin file is 8,054,016 KB

Thanks

Edited July 9, 2011 by weetoots

[LIGHTNING UK!]

That's been burnt as a multisession disc.

 

Make it nice and clean/simple again by using Build mode instead of Read mode.

 

Just point Build mode at your H:\ drive and create a new image... then burn that.