xavdeman Posted July 20, 2011 Posted July 20, 2011 (edited) I've recently got a new Samsung drive. The SH-S223C which I've updated to the latest firmware: SB07 While burning a DL-DVD I got the error: W 01:00:36 Write Speed Miscompare! - MODE SENSE: 11.080 KB/s (8x), GET PERFORMANCE: 8.310 KB/s (6x) Now I read the topic http://forum.imgburn.com/index.php?showtopic=11300 In http://forum.imgburn.com/index.php?showtopic=11300&view=findpost&p=100927 post number 9 Lightning says it's a bug in that drive's firmware and later, in post #18 he says "Yes it's done, I have worked around the issue with these drives.". Maybe this drive needs a workaround too, since the disk ended up being unreadable in the majority of the drives I have. I also think it's strange that it miscompares to 6x, but the log says: I 01:16:54 Average Write Rate: 8.659 KB/s (6.3x) - Maximum Write Rate: 11.174 KB/s (8.1x) So the speed has been fluctuating a lot. Log below and graph data attached. I 00:57:55 ImgBurn Version 2.5.5.0 started! I 00:57:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 00:57:55 Total Physical Memory: 4.193.460 KB - Available: 2.616.460 KB I 00:57:55 Initialising SPTI... I 00:57:55 Searching for SCSI / ATAPI devices... I 00:57:55 -> Drive 1 - Info: DTSOFT BDROM 1.05 (I:) (Virtual) I 00:57:55 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223C SB07 (D:) (SATA) I 00:57:55 Found 1 DVD±RW/RAM and 1 BD-ROM! I 01:00:35 Operation Started! I 01:00:35 Source File: F:\image.dvd I 01:00:35 Source File Sectors: 3.827.488 (MODE1/2048) I 01:00:35 Source File Size: 7.838.695.424 bytes I 01:00:35 Source File Volume Identifier: DVD_ROM I 01:00:35 Source File Volume Set Identifier: d0a44000MS UDFBridge I 01:00:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 01:00:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 01:00:35 Source File File System(s): ISO9660; UDF (1.50) I 01:00:35 Destination Device: [0:2:0] TSSTcorp CDDVDW SH-S223C SB07 (D:) (SATA) I 01:00:35 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x) I 01:00:35 Destination Media Sectors: 4.173.824 I 01:00:35 Write Mode: DVD I 01:00:35 Write Type: DAO I 01:00:36 Write Speed: MAX I 01:00:36 Link Size: Auto I 01:00:36 Lock Volume: Yes I 01:00:36 Test Mode: No I 01:00:36 OPC: No I 01:00:36 BURN-Proof: Enabled W 01:00:36 Write Speed Miscompare! - MODE SENSE: 11.080 KB/s (8x), GET PERFORMANCE: 8.310 KB/s (6x) I 01:00:36 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x) I 01:00:36 Book Type Setting: DVD-ROM I 01:00:36 Optimal L0 Data Zone Capacity: 1.913.760 I 01:00:36 Optimal L0 Data Zone Method: Copied From Original Disc I 01:01:28 Set L0 Data Zone Capacity Succeeded! I 01:01:28 Filling Buffer... (40 MB) I 01:01:28 Writing LeadIn... I 01:01:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 01:01:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 01:01:35 Writing Layer 0... (LBA: 0 - 1913759) I 01:08:43 Writing Layer 1... (LBA: 1913760 - 3827487) I 01:16:19 Synchronising Cache... I 01:16:20 Closing Track... I 01:16:21 Finalising Disc... I 01:16:54 Exporting Graph Data... I 01:16:54 Graph Data File: C:\Users\xavdeman\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB07_WOENSDAG-20-JULI-2011_1-00_RITEK-S04-66_MAX.ibg I 01:16:54 Export Successfully Completed! I 01:16:54 Operation Successfully Completed! - Duration: 00:16:18 I 01:16:54 Average Write Rate: 8.659 KB/s (6.3x) - Maximum Write Rate: 11.174 KB/s (8.1x) Edited July 20, 2011 by xavdeman
Cynthia Posted July 20, 2011 Posted July 20, 2011 Even if it burned ok, it can still be a crappy burn. Verify would check that. W = Warning E = Error
LIGHTNING UK! Posted July 20, 2011 Posted July 20, 2011 The Write Speed Miscompare issue there is not the same as the one talked about in that thread. No workaround is necessary. You just have this problem... http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts