Build mode - Burn "hung" at 14% on second copy

[Defenestration]

While IB was burning the second copy in Build mode, it "hung" at 14% during "Writing Image" stage. The Time elapsed stat kept counting upwards, the drive was still recognized in Explorer, and the DVD drive still appeared to be spinning the disc.

 

After clicking Cancel the log showed "Abort Request Acknowledged", but I assume it didn't cancel as IB was still showing the progress dialog. Finally, I switched off the external drive which sorted out IB and the log showed "14:32:36 Failed to Write Sectors 305312 - 305343 - The request was aborted.", so does this indicate a problem with the media ?

 

Below is the last part of the log

 

I 14:17:00 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x)

I 14:17:00 Destination Media Sectors: 2,298,496

I 14:17:00 Write Mode: DVD

I 14:17:00 Write Type: DAO

I 14:17:00 Write Speed: 12x

I 14:17:00 Link Size: Auto

I 14:17:00 Test Mode: No

I 14:17:00 BURN-Proof: Enabled

I 14:17:01 Filling Buffer

I 14:17:02 Writing LeadIn

I 14:17:40 Writing Image

I 14:28:54 Abort Request Acknowledged

E 14:32:36 Failed to Write Sectors 305312 - 305343 - The request was aborted.

I 14:32:36 Synchronising Cache

W 14:32:38 Device Removal Detected!

W 14:32:38 The device list will be refreshed at the next available opportunity.

E 14:33:00 Synchronise Cache Failed! - Reason: The specified network resource or device is no longer available.

E 14:33:00 Failed to Write Image!

I 14:33:00 Exporting Graph Data

I 14:33:00 Graph Data File: D:\ImgBurn_Graph_Data\_NEC_DVD_RW_ND-4550A_1.X7_07-AUGUST-2006_14-17_MCC_03RG20_12x.ibg

I 14:33:00 Export Successfully Completed!

E 14:33:00 Operation Failed! - Duration: 00:15:59

I 14:33:00 Average Write Rate: 682 KB/s (0.5x) - Maximum Write Rate: 9,598 KB/s (6.9x)

I 14:33:00 Searching for SCSI / ATAPI devices

I 14:33:00 Found 1 DVD-ROM/CD-RW!

[LIGHTNING UK!]

Your drive/drivers crapped out, nothing more.

[blutach]

12x write speed on an external drive? That's pushing the envelope defen.

 

Rotsa ruck.

 

Regards

[Defenestration]

12x write speed on an external drive? That's pushing the envelope defen.

I've never had any problems before and the interface can handle up to just over 14x (according to Nero CD/DVD Speed).

 

I guess you could say I'm impatient, hence the highest speed possible.

[LIGHTNING UK!]

Highest speed possible hey.... maybe you should buy a desktop pc then and put an ide burner in it! lol

[cornholio7]

i wouldn't bother burning usb over 8x personally

[blutach]

Even that's pushing it I reckon. I saw some very good work by dbminter in the old place that gave all sorts of good explantions about the risks of semaphore timeouts in external drives, particualrly with ALI chips.

 

Defen - your problems here and in other threads where you're losing buffer are most likely related to your need for speed. Maybe less haste, more speed, eh?

 

Regards

[lfcrule1972]

I feel the need...... the need for speed.......

 

[Defenestration]

Re. losing the buffer, I don't understand why the problem doesn't occur with Nero.

[volvofl10]

Corn's and Blu are the mark with this one .

 

if you want to gamble at more than 8x, then be prepared for coasters everywhere .

 

best max speed for an ext dvd writer using USB2.0 or firewire1394 is 8x . you should get consistent results at 8x.

by making the statement that you did above, youve just answered your own questions about buffer underuns.anything over 8x will/probably will cause buffer problems ( sound familiar ?).

DONT believe everything Nero tells you , it lies about how long it takes to write a disc ( check the actual burn against a watch , then see how far out neros est time is)

 

 

as we have been thru the speed thing before with laptops and ext drives , then im not saying any more

[Kenadjian]

Yeah, I think the boys are right, you just think that nero is going faster than 8x, I would have thought a guy with your knowledge would have been all over this one.

[Defenestration]

OK, I'll check the actual time taken for an 8x and 12x burn with Nero and compare the result with a burn at 8x and 12x in IB.