zorro101 Posted September 6, 2011 Posted September 6, 2011 hello i have to try to format the BD-RE 50gb Sony with LG GGW-H20L and i have this problem: I 17:16:17 ImgBurn Version 2.5.5.0 started! I 17:16:17 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:16:17 Total Physical Memory: 1.047.856 KB - Available: 709.200 KB I 17:16:17 Initialising SPTI... I 17:16:17 Searching for SCSI / ATAPI devices... I 17:16:19 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL07 (E:) (ATA) I 17:16:19 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (M:) (SCSI) I 17:16:19 Found 1 BD-ROM/HD DVD-ROM and 1 HD DVD-ROM/BD-RE! I 17:18:04 Operation Started! I 17:18:04 Device: [2:0:0] HL-DT-ST BD-RE GGW-H20L YL07 (E:) (ATA) I 17:18:04 Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 17:18:04 Quick Erase: No I 17:18:04 Format Properly: Yes I 17:18:04 Format Size: Preferred I 17:18:04 Format With Full Certification: Yes I 17:18:04 Format Without Spare Areas: Yes I 17:18:05 Erasing Disc... W 18:49:45 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/4) - Format Command Failed E 18:49:47 Failed to Erase Disc! - Reason: Format Command Failed E 18:49:47 Failed to unlock drive from exclusive access. E 18:49:47 Reason: Funzione non corretta. E 18:49:47 Operation Failed! - Duration: 01:31:43 can you help me, please? i try 2 times with the same result thanks best regards
LIGHTNING UK! Posted September 6, 2011 Posted September 6, 2011 Beyond cleaning the drive with a cleaning disc, there probably isn't anything you can do. The drive just has an issue with the disc. Can you try another one? (disc and/or drive!)
zorro101 Posted September 6, 2011 Author Posted September 6, 2011 Beyond cleaning the drive with a cleaning disc, there probably isn't anything you can do. The drive just has an issue with the disc. Can you try another one? (disc and/or drive!) i don't try another disk/drive i try to format full (spare areas disabled) to resolve the speed burning problem that is 0.9x instead of 2x can i try to format quick, but how resolve the speed burning problem? with fastwrite? thanks again best regards
zorro101 Posted September 6, 2011 Author Posted September 6, 2011 sorry: i don't try another disk/drive I mean: i can't try another disk/drive sorry for my english!
LIGHTNING UK! Posted September 6, 2011 Posted September 6, 2011 If you don't format the disc properly/in the same way, there is of course a good chance your drive won't error out in the same way. But that doesn't mean it's ok, it just means it hasn't been fully/properly tested!
zorro101 Posted September 7, 2011 Author Posted September 7, 2011 I have try to format quick and, obviously, is ok!!! I have to try then to burn with fastwrite BD-RE enabled and finally the write speed is 2X Now, if I understand correctly what you told me it could be that the disk has defects and that some data may be poorly written. I understand you correctly thanks so mutch best regards
LIGHTNING UK! Posted September 7, 2011 Posted September 7, 2011 If it formats with spare areas disabled, you don't need FastWrite enabled. The only option you'd (should!) need to disable to get past that formatting error is the 'Perfer Format With Full Certification' one. So turn that off (and Fastwrite too if you've enabled it), do another full format and see how it goes. Leave Verify enabled when you burn so it checks the data that has been burnt to it.
Recommended Posts