J-Jack Posted September 6, 2011 Share Posted September 6, 2011 (edited) Hi ImgBurn Community, first sry for my bad English I hope you can understand me! I have a problem with ImgBurn, I wanted to Burn Verbatim DVD+ DL but since one month it failed. Tested it with 4x 6x 8x (2,4x my drive doesn't support) As it failed I tested it first with no SPTD Driver , failed. I searched for a new Driver, have the newest. After that I reinstall Windows 7 and tested it, failed. At Next I opened the drive and clean it manuelly(But there was no dirt), test failed. Iam thinking that I need a new one ... but first I ask you if I need a new one ? Or is there some alternative? CD+ -> All fine, burns 20 in a row all perfekt! DVD+ -> All fine, burns many of it and they were all fine, too! DVD+DL -> Anytime I want to Burn Verbatim DVD+DL , the burntask closed with Error <5% (90% of it the rest it stops at 5%< <50%)(15 Times tested) Thanks for helping! So here is the Log: I 15:40:58 ImgBurn Version 2.5.5.0 started! I 15:40:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 15:40:58 Total Physical Memory: 4.126.660 KB - Available: 2.220.012 KB I 15:40:58 Initialising SPTI... I 15:40:58 Searching for SCSI / ATAPI devices... I 15:40:58 -> Drive 1 - Info: HL-DT-ST DVD+-RW GSA-H31N B110 (G:) (ATA) I 15:40:58 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D163B SB01 (H:) (ATA) I 15:40:58 Found 1 DVD-ROM and 1 DVD±RW! I 15:41:01 Operation Started! I 15:41:01 Source File: N:\... I 15:41:01 Source File Sectors: 3.827.488 (MODE1/2048) I 15:41:01 Source File Size: 7.838.695.424 bytes I 15:41:01 Source File Volume Identifier: DVD_ROM I 15:41:01 Source File Volume Set Identifier: d0a44000MS UDFBridge I 15:41:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:41:01 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:41:01 Source File File System(s): ISO9660; UDF (1.50) I 15:41:01 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GSA-H31N B110 (G:) (ATA) I 15:41:01 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) I 15:41:01 Destination Media Sectors: 3.827.520 I 15:41:01 Write Mode: DVD I 15:41:01 Write Type: DAO I 15:41:01 Write Speed: 6x I 15:41:01 Link Size: Auto I 15:41:01 Lock Volume: Yes I 15:41:01 Test Mode: No I 15:41:01 OPC: No I 15:41:01 BURN-Proof: Enabled I 15:41:01 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x) I 15:41:01 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 15:41:01 Optimal L0 Data Zone Capacity: 1.913.760 I 15:41:01 Optimal L0 Data Zone Method: Copied From Original Disc I 15:41:01 Set L0 Data Zone Capacity Succeeded! I 15:41:02 Filling Buffer... (40 MB) I 15:41:03 Writing LeadIn... W 15:41:03 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write W 15:41:03 Retrying (1 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (2 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (3 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (4 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (5 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (6 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (7 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (8 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (9 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (10 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (11 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (12 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (13 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (14 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (15 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (16 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (17 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (18 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (19 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write W 15:41:03 Retrying (20 of 20)... W 15:41:03 Retry Failed - Reason: Invalid Address For Write E 15:41:07 Failed to Write Sectors 0 - 31 - Reason: Invalid Address For Write E 15:41:07 Next Writable Address: 0 I 15:41:07 Synchronising Cache... W 15:41:09 User opted to skip the 'Close Track/Session/Disc' functions. E 15:41:09 Failed to Write Image! E 15:41:09 Operation Failed! - Duration: 00:00:08 I 15:41:09 Average Write Rate: N/A - Maximum Write Rate: N/A Edit: Yes I read the pinned topic and 2 topics with Spindle Servo failure (one of it -> Look pinned topic number 5) And do you know a good drive for Verbatim +DL ? It would be perfekt if I could scan with it too. Can I adjust the Laser or something like that? Edited September 6, 2011 by J-Jack Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 6, 2011 Share Posted September 6, 2011 Don't try and reuse a disc that's failed previously - as you've done in that log. Cleaning the drive with a cleaning disc may help. Due to the price of them, you're better off getting a new drive instead if you don't already have access to one. If you want a new drive, go for something like an Optiarc 7260/7280. Link to comment Share on other sites More sharing options...
J-Jack Posted September 7, 2011 Author Share Posted September 7, 2011 (edited) First thanks for the answer! Didn't see that this one was an used disc Oo (Have looked only on the back of disc) But testet it with 15+... The Laser I cleaned manually, I found it better than the cleaning disc... Have not heard good things about it. Both drives are very Cheap , have planned more money for a new drive but this is fine . Don't find this answer, can I scan the quality of burned data with it ? + can it read Jitter ? greeting J-Jack Edited September 7, 2011 by J-Jack Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 7, 2011 Share Posted September 7, 2011 You want a LiteOn drive if you're planning on doing scanning. Get both Link to comment Share on other sites More sharing options...
J-Jack Posted September 7, 2011 Author Share Posted September 7, 2011 (edited) Huge Thanks ! (can't vote you positive -.- reached for this day ...) PS: Today & Yesterday you posted here at 04:58 PM ^^ Edit for Users which read this and have the same Questions: I read this: - the Sony Optiarc 7240 is a very good DVD+DL Burner, but sometimes he is loud (no Problem for me) Not Very Good for DL. LiteOn iHAS 624 can do both Burning and Scanning, but have Problems with original CDs. -> The Sony-drive can Scan the burned DvD Pie, Pif but no Jitter (not only verify for more Infos look here if you can read German ) - the LiteOn iHAS122 is a good Scan drive (to test quality)he can scan Pie, Pif and Jitter! If I have more Informations or tested one of them I will post it here! Greeting J-Jack Edited September 11, 2011 by J-Jack Link to comment Share on other sites More sharing options...
Recommended Posts