raredvd Posted October 3, 2011 Posted October 3, 2011 I have made a directory that contains the files AVCHD but I cant burn it to a dvd-dl disc and run it on the bluray player when I run this finished disc in the computer powerdvd runs and shows avchd resume or resart but selecting either fails to run it wont register in the stand alone bluray player shows date disc and not a movie disc so whats missing in the setup of this program to make it operate ?
Cynthia Posted October 3, 2011 Posted October 3, 2011 Post a log of that burn. http://forum.imgburn.com/index.php?showtopic=14632
raredvd Posted October 3, 2011 Author Posted October 3, 2011 Post a log of that burn. http://forum.imgburn.com/index.php?showtopic=14632 attached hope this helps ImgBurn.log
LIGHTNING UK! Posted October 3, 2011 Posted October 3, 2011 You didn't verify the disc so we can't see if it's actually readable. Assuming it would have been, the issue must be with your source files (and/or the folder structure). ImgBurn just burns 'as-is', so if something doesn't playback your disc, it must be because it can't read the disc itself or doesn't like what's on it. What software did you use to create said AVCHD structure in the first place?
raredvd Posted October 3, 2011 Author Posted October 3, 2011 thats the problem I used this program multiavchd and this program uses the program imburn with 100% success Imburn strat from the program and burns the disk then it leave a copy in the directory , and its this copy I cant re burn by starting imburn as a stand alone program as stated it rights to the disc and the files are on it but wont play ... I can open the file structure in windos and run each m2ts file so the burn is correct in the video is there something that mulitcvchd does to the imburn ? that i should do ?
LIGHTNING UK! Posted October 3, 2011 Posted October 3, 2011 If you've got discs that multiavchd burnt (via ImgBurn) that work and discs you've burnt (via ImgBurn) that don't work, compare the folder structure to see what's different. It could be something as simple as including (or not including) the 'certificate' folder.
raredvd Posted October 3, 2011 Author Posted October 3, 2011 will do but there must be a method of simply using imburn correctly to make a runnable disc using AVCHD that will play on all bluray players somthing I am missing possible in the setup
raredvd Posted October 3, 2011 Author Posted October 3, 2011 Ok in the discs that multiavchd burnt (via ImgBurn) this has in the certificate folder a file id.bdmv and this is missing in both the files on the hard drive and the files on the disc made singly by imgburn I take it then ingburn must some how make this file .
LIGHTNING UK! Posted October 3, 2011 Posted October 3, 2011 ImgBurn can be told to make/add the 'certificate' folder if it doesn't exist, but it never puts anything inside it. If you can't locate that folder / file on your hard drive, multiavchd must be creating it temporarily and then removing it later on. multiavchd has lots of special tricks to create the right file/folder structure for a given player. If you want it to leave that file/folder structure intact once it has been closed down, asks its author how to do it - it's nothing to do with me.
raredvd Posted October 4, 2011 Author Posted October 4, 2011 then your program how does one set it up to make a avchd movie that will run on the greter majory of stand alone players , I must be doing something incorrectly
LIGHTNING UK! Posted October 4, 2011 Posted October 4, 2011 I must be doing something incorrectly You aren't. ImgBurn just burns what you give it. If what you give it is missing folders/files, that's down to you (or whatever made those folders/files in the first place). Playback compatibility is not really my concern - there are too many variations and I don't have the time or means to keep up with them all. Like I said, talk to the author of multiavchd (over at the Doom9 forums) and ask him where that certificate and 'id.bdmv' file are coming from - if not found on your hdd. http://forum.doom9.org/forumdisplay.php?f=39
raredvd Posted October 5, 2011 Author Posted October 5, 2011 well this cound assit all otheres with a problem burning a directory with AVCHD to be able to use on almost every blueray player its realy not a program fault or a file fault it just not knowing how to use your program the correct way From what I am told this will do the job no matter what program has made the AVCHD directory with the files in it start the program in explorer then select the diretory BDMV & Certific drag to IMGburn and burn to a d-l dsic and your done the problem is if one drags the entire AVCHD directory your program aparently make it for a sony games machine or simular and not a stand alone Player , strange but thats was my problem and the solution I hope you can advice otheres so not to waist the disc and time
LIGHTNING UK! Posted October 5, 2011 Posted October 5, 2011 My program doesn't make it for any type of machine. It's generic in its approach. It'll add what you add to it and it won't add what you don't! (with the exception of creating AUDIO_TS / CERTIFICATE folders based on the options in the settings) If you have an AVCHD folder that just contains a BDMV folder and a CERTIFICATE folder, it makes no difference if you add the AVCHD folder or the BDMV and CERTIFICATE folders. What gets burnt to the disc will be exactly the same.
Recommended Posts