ecormie24 Posted October 5, 2011 Share Posted October 5, 2011 Hello I'm new to this forum, and have problem i cant seem to figure out. Any help is much appreciated I Can't burn my xbox360 image. After 71% the burning stops and than appears this message "IEenvalidOp", the mirror said "Burn Thread Runtime Exception"........ I never got this kind of problems burning my xbox360 images Please help me, I've wasted four dvd DL Verbatim!!! I 18:59:39 ImgBurn Version 2.5.6.0 started! I 18:59:39 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 18:59:39 Total Physical Memory: 4,160,544 KB - Available: 2,094,088 KB W 18:59:39 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 18:59:39 Initialising SPTI... I 18:59:39 Searching for SCSI / ATAPI devices... I 18:59:39 -> Drive 1 - Info: Optiarc BD ROM BC-5500S4 1.Va (E:) (ATAPI) I 18:59:39 -> Drive 2 - Info: JEVOF VCTMB4LY3 3.5Z (H:) (SCSI) I 18:59:39 -> Drive 3 - Info: SZWXOBS 4TUJS9UV 1.04 (G:) (SCSI) I 18:59:39 Found 1 BD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-ROM/DVD±RW! W 19:00:14 User accepted disc space warning and is attempting to truncate! I 19:00:14 Operation Started! I 19:00:14 Source File: C:\Users\Edward\Desktop\Downloads\Gears_of_War_3_READNFO_XGD3_0800_USA_RF-XBOX360-RRoD {BOOBSMAN}\rrod-gow3.dvd I 19:00:14 Source File Sectors: 4,267,015 (MODE1/2048) I 19:00:14 Source File Size: 8,738,846,720 bytes I 19:00:14 Source File Volume Identifier: DVD_ROM I 19:00:14 Source File Volume Set Identifier: cd690000MS UDFBridge I 19:00:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:00:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:00:14 Source File File System(s): ISO9660, UDF (1.50) I 19:00:14 Destination Device: [0:1:0] Optiarc BD ROM BC-5500S4 1.Va (E:) (ATAPI) I 19:00:14 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 19:00:14 Destination Media Supported Write Speeds: 2.4x, 4x I 19:00:14 Destination Media Sectors: 4,173,824 I 19:00:14 Write Mode: DVD I 19:00:14 Write Type: DAO I 19:00:14 Write Speed: 2.4x I 19:00:14 Link Size: Auto I 19:00:14 Lock Volume: Yes I 19:00:14 Test Mode: No I 19:00:14 OPC: No I 19:00:14 BURN-Proof: Enabled I 19:00:14 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 19:00:14 Book Type Setting: DVD-ROM W 19:00:14 Optimal layer break position exceeds L0 capacity. W 19:00:14 Optimal L0 Sectors: 2,133,520 W 19:00:14 Maximum L0 Sectors: 2,086,912 I 19:00:14 Optimal L0 Data Zone Capacity: 2,133,520 I 19:00:14 Optimal L0 Data Zone Method: Copied From Original Disc W 19:00:14 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 19:00:15 Filling Buffer... (40 MB) I 19:00:16 Writing LeadIn... I 19:00:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 19:00:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 19:00:47 Writing Layer 0... (LBA: 0 - 2086911) I 19:21:49 Writing Layer 1... (LBA: 2086912 - 4267014) W 19:36:16 Failed to Write Sectors 2997408 - 2997439 - Reason: Invalid Address For Write W 19:36:16 Retrying (1 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (2 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (3 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (4 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (5 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (6 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (7 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (8 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (9 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (10 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (11 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (12 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (13 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (14 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (15 of 20)... W 19:36:16 Retry Failed - Reason: Invalid Address For Write W 19:36:16 Retrying (16 of 20)... W 19:36:17 Retry Failed - Reason: Invalid Address For Write W 19:36:17 Retrying (17 of 20)... W 19:36:17 Retry Failed - Reason: Invalid Address For Write W 19:36:17 Retrying (18 of 20)... W 19:36:17 Retry Failed - Reason: Invalid Address For Write W 19:36:17 Retrying (19 of 20)... W 19:36:17 Retry Failed - Reason: Invalid Address For Write W 19:36:17 Retrying (20 of 20)... W 19:36:17 Retry Failed - Reason: Invalid Address For Write E 19:50:41 Failed to Write Sectors 2997408 - 2997439 - Reason: Invalid Address For Write E 19:50:41 Next Writable Address: 2997376 I 19:50:42 Synchronising Cache... Its currently stuck at 92% of the "Synchronizing Cache..." part. I thought this was an isolated problem with one specific img file but its now happened on two different occasions. Again, PLZ HELP!! lol Link to comment Share on other sites More sharing options...
Cynthia Posted October 5, 2011 Share Posted October 5, 2011 W 19:00:14 User accepted disc space warning and is attempting to truncate! The image is to big for your current media. You need a Blu-ray disc for that size of image. Link to comment Share on other sites More sharing options...
ecormie24 Posted October 5, 2011 Author Share Posted October 5, 2011 W 19:00:14 User accepted disc space warning and is attempting to truncate! The image is to big for your current media. You need a Blu-ray disc for that size of image. ----Wow that was fast! Thanks!---- I know the image is larger than the media, but its also doing the same when I try and burn smaller images. Just for the hell of it I installed the latest imgburn on my girlfriends Toshiba laptop and tried burning the same image file, to the same media, and it work. I 19:57:51 ImgBurn Version 2.5.6.0 started! I 19:57:51 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 19:57:51 Total Physical Memory: 2,878,360 KB - Available: 1,928,912 KB I 19:57:51 Initialising SPTI... I 19:57:51 Searching for SCSI / ATAPI devices... I 19:57:51 -> Drive 1 - Info: MATSHITA DVD-RAM UJ890AS 1.40 (D:) (SATA) I 19:57:51 Found 1 DVD±RW/RAM! W 20:33:21 User accepted disc space warning and is attempting to truncate! I 20:33:21 Operation Started! I 20:33:21 Source File: C:\Users\Owner\Desktop\rrod-gow3.dvd I 20:33:21 Source File Sectors: 4,267,015 (MODE1/2048) I 20:33:21 Source File Size: 8,738,846,720 bytes I 20:33:21 Source File Volume Identifier: DVD_ROM I 20:33:21 Source File Volume Set Identifier: cd690000MS UDFBridge I 20:33:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:33:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:33:21 Source File File System(s): ISO9660, UDF (1.50) I 20:33:21 Destination Device: [2:0:0] MATSHITA DVD-RAM UJ890AS 1.40 (D:) (SATA) I 20:33:21 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 20:33:21 Destination Media Supported Write Speeds: 2.4x I 20:33:21 Destination Media Sectors: 4,173,824 I 20:33:21 Write Mode: DVD I 20:33:21 Write Type: DAO I 20:33:21 Write Speed: 2.4x I 20:33:21 Link Size: Auto I 20:33:21 Lock Volume: Yes I 20:33:21 Test Mode: No I 20:33:21 OPC: No I 20:33:21 BURN-Proof: Enabled I 20:33:21 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) W 20:33:21 Optimal layer break position exceeds L0 capacity. W 20:33:21 Optimal L0 Sectors: 2,133,520 W 20:33:22 Maximum L0 Sectors: 2,086,912 I 20:33:22 Optimal L0 Data Zone Capacity: 2,133,520 I 20:33:22 Optimal L0 Data Zone Method: Copied From Original Disc W 20:33:22 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 20:33:22 Filling Buffer... (40 MB) I 20:33:23 Writing LeadIn... I 20:33:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 20:33:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 20:33:42 Writing Layer 0... (LBA: 0 - 2086911) I 20:55:34 Writing Layer 1... (LBA: 2086912 - 4267014) I 21:17:32 Synchronising Cache... I 21:17:36 Closing Track... I 21:17:37 Finalising Disc... I 21:18:34 Exporting Graph Data... I 21:18:34 Graph Data File: C:\Users\Owner\AppData\Roaming\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ890AS_1.40_TUESDAY-OCTOBER-04-2011_8-33_PM_MKM-001-00_2.4x.ibg I 21:18:34 Export Successfully Completed! I 21:18:34 Operation Successfully Completed! - Duration: 00:45:13 I 21:18:34 Average Write Rate: 3,175 KB/s (2.3x) - Maximum Write Rate: 3,435 KB/s (2.5x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 5, 2011 Share Posted October 5, 2011 After 71% the burning stops and than appears this message "IEenvalidOp", the mirror said "Burn Thread Runtime Exception"........ I'm not seeing anything in your log to suggest that's the case. If the program crashes, make it send an error report so I can look into the cause of the crash. All I see in your log is this... W 19:36:16 Failed to Write Sectors 2997408 - 2997439 - Reason: Invalid Address For Write And that just means your drive failed to burn that bit of the disc. 'Invalid Address For Write' isn't a typical initial error code though, so it might be that your drivers (and / or filter drivers) are making the real one dissappear. What chipset does your motherboard use? Which controller do you have the drive attached to? When you're in Write mode, right click the drive selection box (in the 'Destination' box) and click 'Family Tree'. Then copy + paste what gets written into the log window. Link to comment Share on other sites More sharing options...
Recommended Posts