kleptokat Posted October 10, 2011 Posted October 10, 2011 (edited) W 15:14:41 User accepted disc space warning and is attempting to underburn! I 15:14:41 Operation Started! I 15:14:41 Source File: -==/\/[bUILD IMAGE]\/\==- I 15:14:41 Source File Sectors: 2,165,504 (MODE1/2048) I 15:14:41 Source File Size: 4,434,952,192 bytes I 15:14:41 Source File Volume Identifier: Fava2 I 15:14:41 Source File Volume Set Identifier: 3F4A79CC00210AFB I 15:14:41 Source File Application Identifier: IMGBURN V2.5.6.0 - THE ULTIMATE IMAGE BURNER! I 15:14:41 Source File Implementation Identifier: ImgBurn I 15:14:41 Source File File System(s): ISO9660, UDF (1.02) I 15:14:41 Destination Device: [2:1:0] HL-DT-ST DVDRAM GH41N MN01 (D:) (ATA) I 15:14:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 15:14:41 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 15:14:41 Destination Media Sectors: 4,173,824 I 15:14:41 Write Mode: DVD I 15:14:41 Write Type: DAO I 15:14:41 Write Speed: 8x I 15:14:41 Link Size: Auto I 15:14:41 Lock Volume: Yes I 15:14:41 Test Mode: No I 15:14:41 OPC: No I 15:14:41 BURN-Proof: Enabled I 15:14:41 Write Speed Successfully Set! - Effective: 11,079 KB/s (8x) I 15:14:41 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 15:14:41 Optimal L0 Data Zone Capacity: 1,082,752 I 15:14:41 Optimal L0 Data Zone Method: ECC Block Boundary And then it just stops there, doesn't move at all, I've been patient, but it just won't move. I then try'd canceling it, and it won't cancel, either! It says that it acknowledged the cancel, but it still won't cancel, I tryed to open the disc drive, but it won't budge, either, help, quick! I need these discs ASAP. Edited October 10, 2011 by kleptokat
LIGHTNING UK! Posted October 10, 2011 Posted October 10, 2011 You'll probably have to force the machine to power down by holding in the power button for 5 seconds or so. Are you being forced to use double layer discs? What you're burning fits on single layer discs just fine. Maybe the drive would do a better job if you used one of the other supported write speeds.
Recommended Posts