decay Posted October 18, 2011 Posted October 18, 2011 (edited) hey guys, i know theres already a similar thread, but reading it didnt help me so i started a new one. im trying to burn an xbox iso, its the first of the new "xgd3" type. so, after downloading the newest version of imgburn i started the process as usual and it worked- until it came to "finalizing disc", which imgburn is now working on since about an hour. the first time this happened today i thought it was a somehow broken dvd so i started a 2nd try, but again it stops at the end. what might help? thanks alot. I 15:02:00 ImgBurn Version 2.5.6.0 started! I 15:02:00 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 15:02:00 Total Physical Memory: 4.193.528 KB - Available: 2.763.272 KB W 15:02:00 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 15:02:00 Initialising SPTI... I 15:02:00 Searching for SCSI / ATAPI devices... I 15:02:00 -> Drive 1 - Info: TSSTcorp CD/DVDW SH-W162C TS12 (D:) (ATA) I 15:02:00 -> Drive 2 - Info: JSBQ VSXMV81IN 1.03 (I:) (SCSI) I 15:02:00 Found 1 DVD±RW and 1 BD-ROM/HD DVD-ROM! W 15:03:49 User accepted disc space warning and is attempting to truncate! I 15:03:49 Operation Started! I 15:03:49 Source File: C:\Users\Decay\Desktop\jdownloader\Batac-COMPLEX.part01\Batman.Arkham.City.X360-COMPLEX\complex-batmanac.dvd I 15:03:49 Source File Sectors: 4.267.015 (MODE1/2048) I 15:03:49 Source File Size: 8.738.846.720 bytes I 15:03:49 Source File Volume Identifier: DVD_ROM I 15:03:49 Source File Volume Set Identifier: ea214000MS UDFBridge I 15:03:49 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:03:49 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:03:49 Source File File System(s): ISO9660; UDF (1.50) I 15:03:49 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-W162C TS12 (D:) (ATA) I 15:03:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 15:03:49 Destination Media Supported Write Speeds: 2,4x; 4x; 6x I 15:03:49 Destination Media Sectors: 4.173.824 I 15:03:49 Write Mode: DVD I 15:03:49 Write Type: DAO I 15:03:49 Write Speed: 2x I 15:03:49 Link Size: Auto I 15:03:49 Lock Volume: Yes I 15:03:49 Test Mode: No I 15:03:49 OPC: No I 15:03:49 BURN-Proof: Enabled I 15:03:49 Write Speed Successfully Set! - Effective: 2.770 KB/s (2x) I 15:03:49 Book Type Setting: DVD-ROM W 15:03:49 Optimal layer break position exceeds L0 capacity. W 15:03:49 Optimal L0 Sectors: 2.133.520 W 15:03:49 Maximum L0 Sectors: 2.086.912 I 15:03:49 Optimal L0 Data Zone Capacity: 2.133.520 I 15:03:49 Optimal L0 Data Zone Method: Copied From Original Disc W 15:03:49 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 15:03:50 Filling Buffer... (40 MB) I 15:03:50 Writing LeadIn... I 15:05:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 15:05:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 15:05:03 Writing Layer 0... (LBA: 0 - 2086911) I 15:25:59 Writing Layer 1... (LBA: 2086912 - 4267014) I 15:46:57 Synchronising Cache... I 15:47:07 Closing Track... I 15:47:08 Finalising Disc... W 16:25:58 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 16:25:58 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In W 16:25:58 Retrying (1 of 3)... Edited October 18, 2011 by decay
LIGHTNING UK! Posted October 18, 2011 Posted October 18, 2011 Try the remaining supported speeds, 2x (2.4x) might not be the best one for your drive/firmware/media combo. The drive is a good few years old now so cleaning it with a cleaning disc may help. Try some discs from a different spindle too - just to rule out a faulty batch of discs. If all else fails, invest in a new drive.
decay Posted October 18, 2011 Author Posted October 18, 2011 you mean even slower? hm. i guess ill buy a new one. what about the LG GH22NP20? will it work?
LIGHTNING UK! Posted October 18, 2011 Posted October 18, 2011 No, not slower... faster! The supported speeds are 2.4x, 4x and 6x. You've already tried 2.4x (even though you set it to 2x) so that leaves 4x and 6x. Normally I'd recommend an Optiarc 7260/7280 but you might want to look at the 'Lite-On iHASx24 B' range.
decay Posted October 19, 2011 Author Posted October 19, 2011 thanks! i bought this one: amazon germany link its an AD-7280S-0B. will it work? i just want to make sure its the right drive since ive read that its important to have a "B" in the name of the drive.
LIGHTNING UK! Posted October 19, 2011 Posted October 19, 2011 If you're talking about the burners that'll accept the special firmware, they clearly state it must be 1 of 6 models - all of which are 'LiteOn iHASx24 B' something. An 'Optiarc 7280S' is not a 'LiteOn iHASx24 B'.
decay Posted October 19, 2011 Author Posted October 19, 2011 ok, but my question is: does this driver i posted and you recommended WORK when i want to use it for XGD3 iso's so i will be able to burn them on a DL DVD and play them in a xbox?
LIGHTNING UK! Posted October 19, 2011 Posted October 19, 2011 I read around so I know the answer to your question... but this isn't an XBOX forum so I'll let you do your own homework. It'll take you about 2 seconds on Google.
decay Posted October 19, 2011 Author Posted October 19, 2011 I did my homework. I guess i misunderstood your answer in the first place. Since theres no german shop which sells this certain drive, ill send the sony drive back and hope for another drive to come which will work.
Recommended Posts