zandar Posted October 18, 2011 Share Posted October 18, 2011 (edited) I have a Bluray video disc I created in Adobe Encore, it has about 5 GB of movies on it, yet the image is the exact size of the BD-RE (Source Media Size: 24,219,484,160 bytes----This is incorrect) When I realized it was creating a disc image that was not the correct size, I aborted the Image write. Why is it not creating a disc image that reflects the actual amount of data on the disc (the disc image should be around 5 GB in size)? What is up? This disc has only been used once. I 11:54:09 ImgBurn Version 2.5.6.0 started! I 11:54:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:54:09 Total Physical Memory: 3,407,336 KB - Available: 2,207,460 KB I 11:54:09 Initialising SPTI... I 11:54:09 Searching for SCSI / ATAPI devices... I 11:54:09 -> Drive 1 - Info: HL-DT-ST BD-RE WH10LS30 1.00-07 (E:) (ATA) I 11:54:10 -> Drive 2 - Info: PIONEER DVD-RW DVR-110D 1.41 (D:) (ATA) I 11:54:10 Found 1 DVD±RW and 1 BD-RE! I 11:59:06 Operation Started! I 11:59:06 Source Device: [4:0:0] HL-DT-ST BD-RE WH10LS30 1.00 (E:) (ATA) I 11:59:06 Source Media Type: BD-RE (Disc ID: VERBAT-IM0-000) I 11:59:06 Source Media Supported Write Speeds: 2.4x I 11:59:06 Source Media Sectors: 11,825,920 I 11:59:06 Source Media Size: 24,219,484,160 bytes I 11:59:06 Source Media Volume Identifier: Untitled Project I 11:59:06 Source Media Volume Set Identifier: b684aa77Untitled Project I 11:59:06 Source Media Application Identifier: Sonic Solutions I 11:59:06 Source Media Implementation Identifier: AS_Storage 4.20.13.0 I 11:59:06 Source Media File System(s): UDF (2.50) I 11:59:06 Read Speed (Data/Audio): MAX / 8x I 11:59:06 Hardware Read Error Retries: 10 I 11:59:06 Destination File: C:\Documents and Settings\myname\Desktop\Originals_DO NOT DELETE\movies\AfterEffectsClass.iso I 11:59:06 Destination Free Space: 30,524,137,472 Bytes (29,808,728.00 KB) (29,110.09 MB) (28.43 GB) I 11:59:06 Destination File System: NTFS I 11:59:06 File Splitting: Auto I 11:59:08 Reading Session 1 of 1... (1 Track, LBA: 0 - 11826175) I 11:59:08 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 11826175) I 11:59:08 Reading File System Area of Track 1... (LBA: 0 - 11825919) I 12:08:55 Abort Request Acknowledged --Thanks Edited October 18, 2011 by zandar Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 18, 2011 Share Posted October 18, 2011 Because that's how BD-RE work. There's no way to find out how much you've burnt to it because the entire disc looks burnt. ImgBurn tries to just read the file system area - hence this... I 11:59:08 Reading File System Area of Track 1... (LBA: 0 - 11825919) ... but your burning tool has set the size to what's pretty much the full size of the disc. Use Build mode instead and point it at E:\. Link to comment Share on other sites More sharing options...
zandar Posted October 18, 2011 Author Share Posted October 18, 2011 Use Build mode instead and point it at E:\. Can you explain this further? --Thanks Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 18, 2011 Share Posted October 18, 2011 Load the program, go into Build mode (Create image file from files/folder), add E:\ to the source box. That's pretty much it! Link to comment Share on other sites More sharing options...
Recommended Posts