justaman08 Posted November 25, 2011 Share Posted November 25, 2011 Hello Im new to the forum and would like advice,help,and inlightment!!!!! So when i downloaded imgburn and read the instuctions...i then tried burning a disc 1.problem came up,when I inserted a disC(DVD+R DL)my drive came up in the drop menu but the disc was not.I 10:49:03 ImgBurn Version 2.5.6.0 started! I 10:49:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 10:49:03 Total Physical Memory: 2.095.952 KB - Available: 895.988 KB I 10:49:03 Initialising SPTI... I 10:49:03 Searching for SCSI / ATAPI devices... I 10:49:03 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06-08 (E:) (ATA) I 10:49:03 Found 1 DVD±RW/RAM! 2.So i tried updating the firmware...that was sucsessful,but the problem was not solved. 3.Then i tried some other opperation(erasing)the message that came up was. I 11:45:05 Operation Started! I 11:45:05 Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 11:45:05 Media Type: DVD+RW I 11:45:05 Quick Erase: No I 11:45:05 Format Properly: Yes I 11:45:05 Format Size: Preferred I 11:45:05 Erasing Disc... E 11:46:09 Failed to Erase Disc! - Reason: Medium Not Present E 11:46:09 Operation Failed! - Duration: 00:01:04 4.And an error window came up saying I/O Error! device[0:0:0]HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) Scsi Status:0*02 Interpretation:Check Condition CDB :2300 00 00 00 00 00 08 00 00 Interpretation:Read Format Capacities Sence Area:70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00 00 00 Interpretation:Medium Not Present So please if there is any info or something I can do to fix this.... I would appriciate the INLIGHTMENT Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 25, 2011 Share Posted November 25, 2011 If your drive can't see (recognise/initialise) the disc you've put in it, try some other discs. Link to comment Share on other sites More sharing options...
Recommended Posts