crossey07 Posted December 4, 2011 Share Posted December 4, 2011 Hi. Im new to all this, and im having problems from the word go. I tried burning a disc and i got several error codes starting with.... set l0 data zone capacity failed invalid field in parameter list Here is the rundown of what happened... I 12:42:28 ImgBurn Version 2.5.6.0 started! I 12:42:28 Microsoft Windows Vista Home Basic Edition (6.0, Build 6001 : Service Pack 1) I 12:42:28 Total Physical Memory: 975,016 KB - Available: 237,052 KB I 12:42:28 Initialising SPTI... I 12:42:28 Searching for SCSI / ATAPI devices... I 12:42:29 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T50N RP05 (D:) (ATA) I 12:42:29 Found 1 DVD±RW/RAM! I 12:43:02 Operation Started! I 12:43:02 Source File: C:\Users\courtneycrossey\Desktop\swag-wwe12.iso I 12:43:02 Source File Sectors: 3,827,488 (MODE1/2048) I 12:43:02 Source File Size: 7,838,695,424 bytes I 12:43:02 Source File Volume Identifier: 13599 I 12:43:02 Source File Volume Set Identifier: ceee8000MS UDFBridge I 12:43:02 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:43:02 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:43:02 Source File File System(s): ISO9660, UDF (1.50) I 12:43:02 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50N RP05 (D:) (ATA) I 12:43:02 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 12:43:02 Destination Media Supported Write Speeds: 2.4x, 4x, 6x I 12:43:02 Destination Media Sectors: 4,173,824 I 12:43:03 Write Mode: DVD I 12:43:03 Write Type: DAO I 12:43:03 Write Speed: 2x I 12:43:03 Link Size: Auto I 12:43:03 Lock Volume: Yes I 12:43:03 Test Mode: No I 12:43:03 OPC: No I 12:43:03 BURN-Proof: Enabled W 12:43:03 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:43:03 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:43:03 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:43:03 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:43:03 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) / 8,310 KB/s (6x) W 12:43:03 The drive only supports writing these discs at 2.4x, 4x, 6x. I 12:43:03 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 12:43:03 User Specified L0 Data Zone Capacity: 1,913,760 W 12:44:30 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure W 12:44:40 Retrying (1)... W 12:44:40 Retry Failed - Reason: Invalid Field in Parameter List W 12:56:26 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 12:56:29 Filling Buffer... (20 MB) I 12:56:29 Writing LeadIn... I 12:57:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:57:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:57:22 Writing Layer 0... (LBA: 0 - 1913759) W 12:57:23 Failed to Write Sectors 672 - 703 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) W 12:57:23 Retrying (1 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (2 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (3 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (4 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (5 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (6 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (7 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (8 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (9 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (10 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (11 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (12 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (13 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (14 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (15 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (16 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (17 of 20)... W 12:57:23 Retry Failed - Reason: Invalid Address For Write W 12:57:23 Retrying (18 of 20)... W 12:57:24 Retry Failed - Reason: Invalid Address For Write W 12:57:24 Retrying (19 of 20)... W 12:57:24 Retry Failed - Reason: Invalid Address For Write W 12:57:24 Retrying (20 of 20)... W 12:57:24 Retry Failed - Reason: Invalid Address For Write W 12:57:37 Retrying (21)... W 12:57:37 Retry Failed - Reason: Invalid Address For Write E 12:58:00 Failed to Write Sectors 672 - 703 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) E 12:58:00 Next Writable Address: 128 I 12:58:00 Synchronising Cache... W 12:58:06 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:58:06 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 12:58:12 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 12:58:23 User opted to skip the 'Close Track/Session/Disc' functions. E 12:58:23 Failed to Write Image! I 12:58:23 Exporting Graph Data... I 12:58:23 Graph Data File: C:\Users\courtneycrossey\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50N_RP05_04-DECEMBER-2011_12-43_MKM-003-00_2x.ibg I 12:58:23 Export Successfully Completed! E 12:58:23 Operation Failed! - Duration: 00:15:20 I 12:58:23 Average Write Rate: 36 KB/s (0.0x) - Maximum Write Rate: 36 KB/s (0.0x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 4, 2011 Share Posted December 4, 2011 Slimline drives are all pretty rubbish. Try burning at the other supported write speeds. Try cleaning the drive with a cleaning disc. After that you're left with things like forcing a firmware update to RR09, trying another spindle of discs (make sure they're Verbatims from Singapore) or getting another drive (external half height one). Link to comment Share on other sites More sharing options...
Recommended Posts