I/O error verifying disk

[Lucifers dog]

Not sure what to do.

 

Here's my log...

 

I 15:01:27 ImgBurn Version 2.5.6.0 started!

I 15:01:27 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 15:01:27 Total Physical Memory: 2,612,524 KB - Available: 1,317,276 KB

W 15:01:27 Drive H:\ (FAT32) does not support single files > 4 GB in size.

I 15:01:27 Initialising SPTI...

I 15:01:27 Searching for SCSI / ATAPI devices...

I 15:01:27 -> Drive 1 - Info: ASUS DVD-E616P3H 1.04 (J:) (ATA)

I 15:01:28 -> Drive 2 - Info: HP DVD Writer 640b E152 (I:) (ATA)

I 15:01:28 Found 1 DVD-ROM and 1 DVD±RW!

I 15:02:27 Operation Started!

I 15:02:27 Source File: C:\Documents and Settings\Rigo\Desktop\DonkeyKongCountryReturnsWiiUSA.iso

I 15:02:27 Source File Sectors: 2,294,912 (MODE1/2048)

I 15:02:27 Source File Size: 4,699,979,776 bytes

I 15:02:27 Source File Volume Identifier: Donkey Kong Country Returns

I 15:02:27 Source File File System(s): Special

I 15:02:27 Destination Device: [0:0:0] HP DVD Writer 640b E152 (I:) (ATA)

I 15:02:27 Destination Media Type: DVD-R (Disc ID: MCC 01RG20)

I 15:02:27 Destination Media Supported Write Speeds: 2x, 4x

I 15:02:27 Destination Media Sectors: 2,297,888

I 15:02:27 Write Mode: DVD

I 15:02:27 Write Type: DAO

I 15:02:27 Write Speed: 4x

I 15:02:27 Link Size: Auto

I 15:02:27 Lock Volume: Yes

I 15:02:27 Test Mode: No

I 15:02:27 OPC: No

I 15:02:27 BURN-Proof: Enabled

I 15:02:27 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 15:02:28 Filling Buffer... (40 MB)

I 15:02:31 Writing LeadIn...

I 15:02:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 15:02:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 15:16:48 Synchronising Cache...

I 15:17:21 Exporting Graph Data...

I 15:17:21 Graph Data File: C:\Documents and Settings\Rigo\Application Data\ImgBurn\Graph Data Files\HP_DVD_Writer_640b_E152_THURSDAY-JANUARY-05-2012_3-02_PM_MCC_01RG20_4x.ibg

I 15:17:21 Export Successfully Completed!

I 15:17:21 Operation Successfully Completed! - Duration: 00:14:54

I 15:17:21 Average Write Rate: 5,444 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)

I 15:17:21 Cycling Tray before Verify...

W 15:17:32 Waiting for device to become ready...

I 15:17:49 Device Ready!

I 15:17:51 Operation Started!

I 15:17:51 Source Device: [0:0:0] HP DVD Writer 640b E152 (I:) (ATA)

I 15:17:51 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 01RG20)

I 15:17:51 Source Media Supported Write Speeds: 2x, 4x

I 15:17:51 Image File: C:\Documents and Settings\Rigo\Desktop\DonkeyKongCountryReturnsWiiUSA.iso

I 15:17:51 Image File Sectors: 2,294,912 (MODE1/2048)

I 15:17:51 Image File Size: 4,699,979,776 bytes

I 15:17:51 Image File Volume Identifier: Donkey Kong Country Returns

I 15:17:51 Image File File System(s): Special

I 15:17:51 Read Speed (Data/Audio): MAX / MAX

I 15:17:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 15:17:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

W 15:26:10 Failed to Read Sector 2165488 - Reason: ID CRC or ECC Error

W 15:33:22 Retrying (1)...

W 15:33:24 Retry Failed - Reason: ID CRC or ECC Error

W 15:33:26 Failed to Read Sector 2165488 - Reason: ID CRC or ECC Error

W 15:33:29 Failed to Read Sector 2165489 - Reason: ID CRC or ECC Error

[LIGHTNING UK!]

Does this firmware update work on your drive? Try it.

 

http://www.firmwarehq.com/HP/dvd640b/files.html

 

The discs you're using are old, have you had them sitting around for a few years?

[Lucifers dog]

Does this firmware update work on your drive? Try it.

 

http://www.firmwarehq.com/HP/dvd640b/files.html

 

The discs you're using are old, have you had them sitting around for a few years?

 

So I did the firmware update. Should I try burning the same data again the exact same way?

 

And yes the discs are quite a bit old.

Edited January 6, 2012 by Lucifers dog

[LIGHTNING UK!]

Yup, give it a go.

 

Cleaning the drive may help... as might buying some new discs.