djmatt8787 Posted January 9, 2012 Share Posted January 9, 2012 (edited) ok, i have a LG drive, its a dual layer dvd writer, i chose an internal drive so i can also use it for hot swapping to copy what i have for back-ups. any way, trying to write dead island to a dvd and i get this error: ; //****************************************\\ ; ImgBurn Version 2.5.6.0 - Log ; Sunday, 08 January 2012, 20:50:36 ; \\****************************************// ; ; I 13:32:47 ImgBurn Version 2.5.6.0 started! I 13:32:47 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 13:32:47 Total Physical Memory: 4,059,112 KB - Available: 1,593,724 KB I 13:32:47 Initialising SPTI... I 13:32:47 Searching for SCSI / ATAPI devices... I 13:32:47 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633C TF20 (D:) (ATAPI) I 13:32:48 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN01-03 (G:) (USB) I 13:32:48 Found 2 DVD±RW/RAMs! I 13:34:10 Operation Started! I 13:34:10 Source File: E:\Files\Dead.Island.XBOX360-COMPLEX\complex-deadisland.dvd I 13:34:10 Source File Sectors: 3,827,488 (MODE1/2048) I 13:34:11 Source File Size: 7,838,695,424 bytes I 13:34:11 Source File Volume Identifier: DVD_ROM I 13:34:11 Source File Volume Set Identifier: d68a0000MS UDFBridge I 13:34:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:34:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:34:11 Source File File System(s): ISO9660, UDF (1.50) I 13:34:11 Destination Device: [0:0:0] HL-DT-ST DVDRAM GH22NS50 TN01 (G:) (USB) I 13:34:11 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 13:34:11 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 13:34:11 Destination Media Sectors: 4,173,824 I 13:34:11 Write Mode: DVD I 13:34:11 Write Type: DAO I 13:34:11 Write Speed: 2.4x I 13:34:11 Link Size: Auto I 13:34:11 Lock Volume: Yes I 13:34:11 Test Mode: No I 13:34:11 OPC: No I 13:34:11 BURN-Proof: Enabled I 13:34:11 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 13:34:11 Book Type Setting: DVD-ROM I 13:34:11 Optimal L0 Data Zone Capacity: 1,913,760 I 13:34:11 Optimal L0 Data Zone Method: Copied From Original Disc W 13:34:32 Set L0 Data Zone Capacity Failed! - Reason: The semaphore timeout period has expired. W 13:34:33 Device Removal Detected! W 13:34:33 The device list will be refreshed at the next available opportunity. <here i get a prompt to retry, continue, or cancel.> W 13:35:35 Set L0 Data Zone Capacity Failed! - Reason: The semaphore timeout period has expired. W 13:35:39 Get L0 Data Zone Capacity Failed! - Reason: The requested resource is in use. I 13:35:41 Filling Buffer... (40 MB) I 13:35:43 Writing LeadIn... W 13:35:43 Failed to Write Sectors 0 - 31 - Reason: The requested resource is in use. W 13:35:43 Retrying (1 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (2 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (3 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (4 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (5 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (6 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (7 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (8 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (9 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (10 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (11 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (12 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (13 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (14 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (15 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (16 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (17 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (18 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (19 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. W 13:35:43 Retrying (20 of 20)... W 13:35:43 Retry Failed - Reason: The requested resource is in use. E 13:35:45 Failed to Write Sectors 0 - 31 - Reason: The requested resource is in use. I 13:35:45 Synchronising Cache... W 13:35:45 Synchronise Cache Failed! - Reason: The requested resource is in use. E 13:35:48 Synchronise Cache Failed! - Reason: The requested resource is in use. W 13:35:51 User opted to skip the 'Close Track/Session/Disc' functions. E 13:35:51 Failed to Write Image! E 13:35:52 Failed to unlock drive from exclusive access. E 13:35:52 Reason: The requested resource is in use. E 13:35:52 Operation Failed! - Duration: 00:01:40 I 13:35:52 Average Write Rate: N/A - Maximum Write Rate: N/A I 13:35:53 Searching for SCSI / ATAPI devices... I 13:35:53 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633C TF20 (D:) (ATAPI) I 13:35:56 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN01-03 (G:) (USB) I 13:35:56 Found 2 DVD±RW/RAMs! I 20:50:35 Close Request Acknowledged I 20:50:35 Closing Down... I 20:50:36 Shutting down SPTI... I 20:50:36 ImgBurn closed! so essentially, its not burning... :-( i attached one picture to show the internal drive that i bought, and one picture is for the enclosure, which is essentially USB to SATA. i have succesfully written a disc with these already (MW3)... any advice? Edited January 9, 2012 by djmatt8787 Link to comment Share on other sites More sharing options...
ianymaty Posted January 9, 2012 Share Posted January 9, 2012 The semaphore timeout period is the problem of external drives (not enough power to operate). Take it out from the enclosure and mount it in the computer or try other ports from the back of the motherboard avoiding front panel or other extensions. (!) Please don't start multiple threads on the same problem, use the Edit button. Link to comment Share on other sites More sharing options...
djmatt8787 Posted January 9, 2012 Author Share Posted January 9, 2012 (edited) The semaphore timeout period is the problem of external drives (not enough power to operate). Take it out from the enclosure and mount it in the computer or try other ports from the back of the motherboard avoiding front panel or other extensions. (!) Please don't start multiple threads on the same problem, use the Edit button. hhmmm... my setup is exactly the same as when i did MW3. same USB port on the laptop, same disc type from the reel, the only difference is that in the Livingroom i had the laptop and external drive plugged into two different electrical outlets (on different walls) in my office i have both plugged into the same power strip. i'll try separating them and see what happens. also, i dont have a tower that is powerful enough to do anything.... it barely worked to flash my samsung drive because it has so much BLOATware on it... Edited January 9, 2012 by djmatt8787 Link to comment Share on other sites More sharing options...
djmatt8787 Posted January 9, 2012 Author Share Posted January 9, 2012 The semaphore timeout period is the problem of external drives (not enough power to operate). Take it out from the enclosure and mount it in the computer or try other ports from the back of the motherboard avoiding front panel or other extensions. (!) Please don't start multiple threads on the same problem, use the Edit button. hhmmm... my setup is exactly the same as when i did MW3. same USB port on the laptop, same disc type from the reel, the only difference is that in the Livingroom i had the laptop and external drive plugged into two different electrical outlets (on different walls) in my office i have both plugged into the same power strip. i'll try separating them and see what happens. also, i dont have a tower that is powerful enough to do anything.... it barely worked to flash my samsung drive because it has so much BLOATware on it... and a bust.... i changed rooms, went back to the living room and used the same outlet combo that i used earlier, still failed at SET L0 DATA ZONE CAPACITY... i wish i had a good tower, but i dont, thats why i chose an internal drive in an enclosure, rather than an external drive, for power considerations. it has the USB connection for data, but still its own power plug. any other suggestions? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 9, 2012 Share Posted January 9, 2012 Get a different enclosure. Some just don't work well with the USB ports in the computer and cause timeouts long before they're meant to happen. (I've never considered it to be power related at all) Link to comment Share on other sites More sharing options...
djmatt8787 Posted January 10, 2012 Author Share Posted January 10, 2012 Get a different enclosure. Some just don't work well with the USB ports in the computer and cause timeouts long before they're meant to happen. (I've never considered it to be power related at all) ok, found MY thread by searching for YOUR posts UK... ??? nvm i am going to try to clean slate my tower this weekend and see if it will work as an internal drive. i had hoped that through an enclosure i would be able to successfully perform my desired functions, as my laptop has all the programs, connections, and UMPH. maybe i should seek another (more reputable?) drive enclosure... will update over the weekend. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 10, 2012 Share Posted January 10, 2012 Sticking with your laptop, you have a few options... 1. Get a new usb enclosure and hope it has a better chipset - or at least one that's compatible with your usb chipset. 2. Get a USB pcmcia / expresscard card and hope it works with your enclosure. 3. Get a eSATA pcmcia / expresscard card (if you don't already have an esata port) and an enclosure that supports eSATA. This will allow you to use your drive at full speed... USB may not. I found your thread by just looking for your name in the list of topics (in the 'Started By' column) on the first page. It was only 5 or so down thismorning. Link to comment Share on other sites More sharing options...
djmatt8787 Posted January 14, 2012 Author Share Posted January 14, 2012 Sticking with your laptop, you have a few options... 1. Get a new usb enclosure and hope it has a better chipset - or at least one that's compatible with your usb chipset. 2. Get a USB pcmcia / expresscard card and hope it works with your enclosure. 3. Get a eSATA pcmcia / expresscard card (if you don't already have an esata port) and an enclosure that supports eSATA. This will allow you to use your drive at full speed... USB may not. I found your thread by just looking for your name in the list of topics (in the 'Started By' column) on the first page. It was only 5 or so down thismorning. sooo... i totally wiped my tower, and added the GH22 as an internal drive. (hope there was nothing on ther that i needed :-/ ) just wrote Dead Island... creepy game!!! so thank you lightning UK for beating some sense into me! but whats the deal with overburning? how do you make the drive overburn so that i can fit the whole img on there? i tried to do CoD MW3, but dont think it wrote everything i need, as i cant get online access... oh BTW i have a samsung drive :-D Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 14, 2012 Share Posted January 14, 2012 You can't overburn DVD double layer discs without some sort of firmware modification. One does exist but it's only for a specific range of drives. You'll have to do some research. Link to comment Share on other sites More sharing options...
Recommended Posts