Jump to content

Can't burn DVD iso image to different brand DVD


StephenM

Recommended Posts

I'm having a weird problem with iso images, I hope that somebody here understands what is going on!

 

Here is the scenario. I record video from a Sony videocam on to DVD using a high quality Pioneer standalone DVD recorder/player. I feed the videocam analog out to the analog in of the DVD recorder. Works great, I've been doing this for years. I then make an ISO image backup of the DVD to PC hard disk using ImgBurn. So far, so good. I can play the iso image form hard disk using DVDShrink, and I can copy the iso image to another TY DVD.

 

I recently tried to make DVD backups of the iso images from my hard disk. So the lifecycle is:

 

Videocam -> Yaiyo Yuden DVD using Pioneer recorder

Taiyo Yuden DVD -> iso image on PC hard disk using ImgBurn

iso image from hard disk -> backup DVD using ImgBurn

 

So here's the weird bit. If the backup DVD is also a Taiyo Yuden, it works just fine. However, if I burn the iso image to a TDK DVD, the TDK DVD is unreadable. The drive does not recognize the disc after burning. I've tried this about five times with different iso images, same result. I've tried upgrading ImgBurn to the latest release, same result. Does anyone understand why I cannot copy a Taiyo Yuden iso image to a TDK DVD?

 

(Please don't suggest "The TDK DVDs are all bad" - they are not, I can burn videos from files to these TDK discs, including videos processed by DVDShrink using ImgBurn and they all work just fine. The only TDK disks that have failed are the five onto which I tried to ImgBurn an iso copy from a T-Y original DVD. :-) )

 

Another clue: over the past year, I have made backup copies of dozens of older TDK DVDs using ImgBurn with no problem, transferring

TDK -> hard disk iso -> T-Y

 

Log is below. It shows an apparently successful burn of the iso to DVD, but the verify cannot read the DVD. Any clues are appreciated! Note that when I copied the T-Y DVD to hard disk iso, I gave the iso file a real name (not "LOGICAL VOLUME IDENTIFIER.ISO"). Could this be a problem?

 

Thanks

 

Stephen

 

I 23:08:20 ImgBurn Version 2.5.6.0 started!

I 23:08:20 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 23:08:20 Total Physical Memory: 1,048,044 KB - Available: 210,096 KB

W 23:08:20 Drive D:\ (FAT32) does not support single files > 4 GB in size.

W 23:08:20 Drive G:\ (FAT32) does not support single files > 4 GB in size.

I 23:08:20 Initialising SPTI...

I 23:08:20 Searching for SCSI / ATAPI devices...

I 23:08:20 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H552D GA01 (E:) (ATA)

I 23:08:20 Found 1 DVD±RW!

I 23:09:48 Operation Started!

I 23:09:48 Source File: C:\DVD\Home Movies\Home37_Jul2011_Ireland-Rome.iso

I 23:09:48 Source File Sectors: 2,254,736 (MODE1/2048)

I 23:09:48 Source File Size: 4,617,699,328 bytes

I 23:09:48 Source File Volume Identifier: LOGICAL VOLUME IDENTIFIER

I 23:09:48 Source File Volume Set Identifier: 3EF78DCA

I 23:09:48 Source File Implementation Identifier: PIONEER

I 23:09:48 Source File File System(s): ISO9660, UDF (1.02)

I 23:09:48 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-H552D GA01 (E:) (ATA)

I 23:09:48 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3)

I 23:09:48 Destination Media Supported Write Speeds: 4x, 8x, 12x, 16x

I 23:09:48 Destination Media Sectors: 2,298,496

I 23:09:48 Write Mode: DVD

I 23:09:48 Write Type: DAO

I 23:09:48 Write Speed: 8x

I 23:09:48 Link Size: Auto

I 23:09:48 Lock Volume: Yes

I 23:09:48 Test Mode: No

I 23:09:48 OPC: No

I 23:09:48 BURN-Proof: Enabled

I 23:09:48 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)

I 23:09:48 Filling Buffer... (40 MB)

I 23:09:49 Writing LeadIn...

I 23:10:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 2254735)

I 23:10:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2254735)

I 23:17:57 Synchronising Cache...

I 23:18:13 Exporting Graph Data...

I 23:18:13 Graph Data File: C:\Documents and Settings\Stephen\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552D_GA01_TUESDAY-JANUARY-03-2012_11-09_PM_CMC_MAG._AM3_8x.ibg

I 23:18:13 Export Successfully Completed!

I 23:18:13 Operation Successfully Completed! - Duration: 00:08:25

I 23:18:13 Average Write Rate: 9,932 KB/s (7.2x) - Maximum Write Rate: 11,158 KB/s (8.1x)

I 23:18:13 Cycling Tray before Verify...

W 23:18:19 Waiting for device to become ready...

I 23:18:37 Device Ready!

I 23:25:40 Operation Started!

I 23:25:40 Source Device: [1:0:0] TSSTcorp CD/DVDW TS-H552D GA01 (E:) (ATA)

I 23:25:40 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3)

I 23:25:40 Source Media Supported Write Speeds: 4x, 8x, 12x, 16x

I 23:25:40 Image File: C:\DVD\Home Movies\Home37_Jul2011_Ireland-Rome.iso

I 23:25:40 Image File Sectors: 2,254,736 (MODE1/2048)

I 23:25:40 Image File Size: 4,617,699,328 bytes

I 23:25:40 Image File Volume Identifier: LOGICAL VOLUME IDENTIFIER

I 23:25:40 Image File Volume Set Identifier: 3EF78DCA

I 23:25:40 Image File Implementation Identifier: PIONEER

I 23:25:40 Image File File System(s): ISO9660, UDF (1.02)

I 23:25:40 Read Speed (Data/Audio): MAX / MAX

I 23:25:41 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2254735)

I 23:25:41 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2254735)

W 23:25:56 Failed to Read Sector 0 - Reason: Timeout on Logical Unit

E 23:33:29 Failed to Read Sector 0 - Reason: Timeout on Logical Unit

E 23:33:30 Failed to Verify Sectors!

I 23:33:31 Exporting Graph Data...

I 23:33:31 Graph Data File: C:\Documents and Settings\Stephen\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552D_GA01_TUESDAY-JANUARY-03-2012_11-09_PM_CMC_MAG._AM3_8x.ibg

I 23:33:31 Export Successfully Completed!

E 23:33:31 Operation Failed! - Duration: 00:07:49

I 23:33:31 Average Verify Rate: N/A - Maximum Verify Rate: N/A

Edited by StephenM
Link to comment
Share on other sites

It looks like your drive has problems burning the cheapo 'CMC MAG. AM3' dye TDK discs, that's why the Verify operation then fails.

 

All I'd suggest is that you try the other supported write speeds on that media, one of the other ones (4x, 12x, 16x) may produce a better quality burn than the one you're currently using (8x).

 

Cleaning the drive with a cleaning disc may also help.

 

What you're burning to the disc makes no difference. To a drive, data is data.

 

Therefore, what you said below makes no sense.

 

(Please don't suggest "The TDK DVDs are all bad" - they are not, I can burn videos from files to these TDK discs, including videos processed by DVDShrink using ImgBurn and they all work just fine. The only TDK disks that have failed are the five onto which I tried to ImgBurn an iso copy from a T-Y original DVD. :-) )
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.