successful burn but dvd not recognized

[jydjohnny]

Hey guys,

I'll get right to the point. I burned a double layer dvd with imgburn and was successful. It was verified and everything. however I've put the dvd in 3 different media players and not one of them can recognize the dvd not even the computer i burned it on. The dvd i used to burn on were verbatim AZO 8x dvd+R DL. Used my Toshiba Satellite A665 laptop with i7 core, the drive i use is Optiarc DVD RW AD-7703S 1.T0

 

I really can't figure out why if the disc was a successful burn why it can not be recognized please if anyone can help i'd be very appreciative. Thanks

[Cynthia]

Can you post the log of that burn?

[jydjohnny]

;

I 00:00:47 ImgBurn Version 2.5.6.0 started!

I 00:00:47 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 00:00:47 Total Physical Memory: 4,123,312 KB - Available: 1,410,284 KB

I 00:00:47 Initialising SPTI...

I 00:00:47 Searching for SCSI / ATAPI devices...

I 00:00:47 -> Drive 1 - Info: Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI)

I 00:00:47 Found 1 DVD±RW/RAM!

I 00:03:55 Operation Started!

I 00:03:55 Source File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso

I 00:03:55 Source File Sectors: 3,589,811 (MODE1/2048)

I 00:03:55 Source File Size: 7,351,932,928 bytes

I 00:03:55 Source File File System(s): None

I 00:03:55 Destination Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI)

I 00:03:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 00:03:55 Destination Media Supported Write Speeds: 2.4x, 4x, 6x

I 00:03:55 Destination Media Sectors: 4,173,824

I 00:03:55 Write Mode: DVD

I 00:03:55 Write Type: DAO

I 00:03:55 Write Speed: MAX

I 00:03:55 Link Size: Auto

I 00:03:55 Lock Volume: Yes

I 00:03:55 Test Mode: No

I 00:03:55 OPC: No

I 00:03:55 BURN-Proof: Enabled

I 00:03:55 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)

I 00:03:55 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

I 00:03:56 Optimal L0 Data Zone Capacity: 1,795,872

I 00:03:56 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary

I 00:04:05 Set L0 Data Zone Capacity Succeeded!

I 00:04:05 Filling Buffer... (40 MB)

I 00:04:06 Writing LeadIn...

I 00:04:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3589810)

I 00:04:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810)

I 00:04:10 Writing Layer 0... (LBA: 0 - 1795871)

I 00:15:54 Writing Layer 1... (LBA: 1795872 - 3589810)

I 00:27:46 Synchronising Cache...

I 00:27:47 Closing Track...

I 00:28:01 Finalising Disc...

I 00:28:57 Exporting Graph Data...

I 00:28:57 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_12-03_AM_MKM-003-00_MAX.ibg

I 00:28:57 Export Successfully Completed!

I 00:28:57 Operation Successfully Completed! - Duration: 00:25:02

I 00:28:57 Average Write Rate: 5,070 KB/s (3.7x) - Maximum Write Rate: 8,475 KB/s (6.1x)

I 00:28:57 Cycling Tray before Verify...

W 00:29:20 Waiting for device to become ready...

I 00:29:29 Device Ready!

I 00:29:32 Operation Started!

I 00:29:32 Source Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI)

I 00:29:32 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00)

I 00:29:32 Source Media Supported Write Speeds: 2.4x, 4x, 6x

I 00:29:32 Image File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso

I 00:29:32 Image File Sectors: 3,589,811 (MODE1/2048)

I 00:29:32 Image File Size: 7,351,932,928 bytes

I 00:29:32 Image File File System(s): None

I 00:29:32 Read Speed (Data/Audio): MAX / MAX

I 00:29:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3589810)

I 00:29:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810)

I 00:29:34 Verifying Layer 0... (LBA: 0 - 1795871)

I 00:37:40 Verifying Layer 1... (LBA: 1795872 - 3589810)

I 00:45:43 Exporting Graph Data...

I 00:45:43 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_12-03_AM_MKM-003-00_MAX.ibg

I 00:45:43 Export Successfully Completed!

I 00:45:43 Operation Successfully Completed! - Duration: 00:16:09

I 00:45:43 Average Verify Rate: 7,416 KB/s (5.4x) - Maximum Verify Rate: 10,589 KB/s (7.6x)

I 21:52:08 Operation Started!

I 21:52:08 Source Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI)

I 21:52:08 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00)

I 21:52:08 Source Media Supported Write Speeds: 2.4x, 4x, 6x

I 21:52:08 Image File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso

I 21:52:08 Image File Sectors: 3,589,811 (MODE1/2048)

I 21:52:08 Image File Size: 7,351,932,928 bytes

I 21:52:08 Image File File System(s): None

I 21:52:08 Read Speed (Data/Audio): MAX / MAX

I 21:52:09 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3589810)

I 21:52:09 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810)

I 21:52:09 Verifying Layer 0... (LBA: 0 - 1795871)

I 22:00:16 Verifying Layer 1... (LBA: 1795872 - 3589810)

I 22:08:22 Exporting Graph Data...

I 22:08:22 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_9-52_PM_MKM-003-00.ibg

I 22:08:22 Export Successfully Completed!

I 22:08:22 Operation Successfully Completed! - Duration: 00:16:12

I 22:08:22 Average Verify Rate: 7,394 KB/s (5.3x) - Maximum Verify Rate: 10,589 KB/s (7.6x)

I 22:09:27 Close Request Acknowledged

I 22:09:27 Closing Down...

I 22:09:28 Shutting down SPTI...

I 22:09:28 ImgBurn closed!

[Cynthia]

I 00:03:55 Source File File System(s): None

You need a file system.

 

Mount the image with something like this and build a new image through ImgBurn.

 

http://www.dvdfab.com/virtual-drive.htm

[LIGHTNING UK!]

I'm not sure that would work Cynthia. To me, it looks like 'Disc 2.iso' is incomplete/corrupt.

 

Create it again from the source files/disc.

[jydjohnny]

If it helps any, I used pinnacle studio to create the image, then used imgburn to write it to the disc

Edited February 6, 2012 by jydjohnny

[jydjohnny]

Could it be that I saved it as an ISO, Should i try creating the image as a IMG or BIN

[LIGHTNING UK!]

You need to go back to pinnacle studio and recreate the ISO. It messed up the first time.

 

Personally, I'd tell Pinnacle to just output a VIDEO_TS folder (with IFO/VOB/BUP files) and then make ImgBurn 'Build' the ISO instead.

[jydjohnny]

Thanks guys, I got it working. Great advice Lightning UK, worked like a charm. I guess pinnacle can't handle building its own disc image. Thanks again