jydjohnny Posted February 3, 2012 Posted February 3, 2012 Hey guys, I'll get right to the point. I burned a double layer dvd with imgburn and was successful. It was verified and everything. however I've put the dvd in 3 different media players and not one of them can recognize the dvd not even the computer i burned it on. The dvd i used to burn on were verbatim AZO 8x dvd+R DL. Used my Toshiba Satellite A665 laptop with i7 core, the drive i use is Optiarc DVD RW AD-7703S 1.T0 I really can't figure out why if the disc was a successful burn why it can not be recognized please if anyone can help i'd be very appreciative. Thanks
jydjohnny Posted February 3, 2012 Author Posted February 3, 2012 ; I 00:00:47 ImgBurn Version 2.5.6.0 started! I 00:00:47 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 00:00:47 Total Physical Memory: 4,123,312 KB - Available: 1,410,284 KB I 00:00:47 Initialising SPTI... I 00:00:47 Searching for SCSI / ATAPI devices... I 00:00:47 -> Drive 1 - Info: Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI) I 00:00:47 Found 1 DVD±RW/RAM! I 00:03:55 Operation Started! I 00:03:55 Source File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso I 00:03:55 Source File Sectors: 3,589,811 (MODE1/2048) I 00:03:55 Source File Size: 7,351,932,928 bytes I 00:03:55 Source File File System(s): None I 00:03:55 Destination Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI) I 00:03:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 00:03:55 Destination Media Supported Write Speeds: 2.4x, 4x, 6x I 00:03:55 Destination Media Sectors: 4,173,824 I 00:03:55 Write Mode: DVD I 00:03:55 Write Type: DAO I 00:03:55 Write Speed: MAX I 00:03:55 Link Size: Auto I 00:03:55 Lock Volume: Yes I 00:03:55 Test Mode: No I 00:03:55 OPC: No I 00:03:55 BURN-Proof: Enabled I 00:03:55 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 00:03:55 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 00:03:56 Optimal L0 Data Zone Capacity: 1,795,872 I 00:03:56 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary I 00:04:05 Set L0 Data Zone Capacity Succeeded! I 00:04:05 Filling Buffer... (40 MB) I 00:04:06 Writing LeadIn... I 00:04:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3589810) I 00:04:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810) I 00:04:10 Writing Layer 0... (LBA: 0 - 1795871) I 00:15:54 Writing Layer 1... (LBA: 1795872 - 3589810) I 00:27:46 Synchronising Cache... I 00:27:47 Closing Track... I 00:28:01 Finalising Disc... I 00:28:57 Exporting Graph Data... I 00:28:57 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_12-03_AM_MKM-003-00_MAX.ibg I 00:28:57 Export Successfully Completed! I 00:28:57 Operation Successfully Completed! - Duration: 00:25:02 I 00:28:57 Average Write Rate: 5,070 KB/s (3.7x) - Maximum Write Rate: 8,475 KB/s (6.1x) I 00:28:57 Cycling Tray before Verify... W 00:29:20 Waiting for device to become ready... I 00:29:29 Device Ready! I 00:29:32 Operation Started! I 00:29:32 Source Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI) I 00:29:32 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) I 00:29:32 Source Media Supported Write Speeds: 2.4x, 4x, 6x I 00:29:32 Image File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso I 00:29:32 Image File Sectors: 3,589,811 (MODE1/2048) I 00:29:32 Image File Size: 7,351,932,928 bytes I 00:29:32 Image File File System(s): None I 00:29:32 Read Speed (Data/Audio): MAX / MAX I 00:29:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3589810) I 00:29:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810) I 00:29:34 Verifying Layer 0... (LBA: 0 - 1795871) I 00:37:40 Verifying Layer 1... (LBA: 1795872 - 3589810) I 00:45:43 Exporting Graph Data... I 00:45:43 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_12-03_AM_MKM-003-00_MAX.ibg I 00:45:43 Export Successfully Completed! I 00:45:43 Operation Successfully Completed! - Duration: 00:16:09 I 00:45:43 Average Verify Rate: 7,416 KB/s (5.4x) - Maximum Verify Rate: 10,589 KB/s (7.6x) I 21:52:08 Operation Started! I 21:52:08 Source Device: [0:0:0] Optiarc DVD RW AD-7703S 1.T0 (D:) (ATAPI) I 21:52:08 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) I 21:52:08 Source Media Supported Write Speeds: 2.4x, 4x, 6x I 21:52:08 Image File: C:\Users\John\Documents\Pinnacle Studio\My Disc Images\Disc 2.iso I 21:52:08 Image File Sectors: 3,589,811 (MODE1/2048) I 21:52:08 Image File Size: 7,351,932,928 bytes I 21:52:08 Image File File System(s): None I 21:52:08 Read Speed (Data/Audio): MAX / MAX I 21:52:09 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3589810) I 21:52:09 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3589810) I 21:52:09 Verifying Layer 0... (LBA: 0 - 1795871) I 22:00:16 Verifying Layer 1... (LBA: 1795872 - 3589810) I 22:08:22 Exporting Graph Data... I 22:08:22 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7703S_1.T0_THURSDAY-FEBRUARY-02-2012_9-52_PM_MKM-003-00.ibg I 22:08:22 Export Successfully Completed! I 22:08:22 Operation Successfully Completed! - Duration: 00:16:12 I 22:08:22 Average Verify Rate: 7,394 KB/s (5.3x) - Maximum Verify Rate: 10,589 KB/s (7.6x) I 22:09:27 Close Request Acknowledged I 22:09:27 Closing Down... I 22:09:28 Shutting down SPTI... I 22:09:28 ImgBurn closed!
Cynthia Posted February 3, 2012 Posted February 3, 2012 I 00:03:55 Source File File System(s): None You need a file system. Mount the image with something like this and build a new image through ImgBurn. http://www.dvdfab.com/virtual-drive.htm
LIGHTNING UK! Posted February 3, 2012 Posted February 3, 2012 I'm not sure that would work Cynthia. To me, it looks like 'Disc 2.iso' is incomplete/corrupt. Create it again from the source files/disc.
jydjohnny Posted February 6, 2012 Author Posted February 6, 2012 (edited) If it helps any, I used pinnacle studio to create the image, then used imgburn to write it to the disc Edited February 6, 2012 by jydjohnny
jydjohnny Posted February 6, 2012 Author Posted February 6, 2012 Could it be that I saved it as an ISO, Should i try creating the image as a IMG or BIN
LIGHTNING UK! Posted February 6, 2012 Posted February 6, 2012 You need to go back to pinnacle studio and recreate the ISO. It messed up the first time. Personally, I'd tell Pinnacle to just output a VIDEO_TS folder (with IFO/VOB/BUP files) and then make ImgBurn 'Build' the ISO instead.
jydjohnny Posted February 10, 2012 Author Posted February 10, 2012 Thanks guys, I got it working. Great advice Lightning UK, worked like a charm. I guess pinnacle can't handle building its own disc image. Thanks again
Recommended Posts