problems with software only burning at 0.7x

[TaLK]

ill post the log for questions concerning this problem. i have hooked my dvd burner to multiple computers, and it still will not burn faster then 0.7x with imgburn. it just will not go any faster. help please!

 

I 12:06:21 Searching for SCSI / ATAPI devices...

I 12:06:22 -> Drive 1 - Info: TSSTcorp CDRW/DVD TSL462D DE04 (E:) (ATA)

I 12:06:23 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-H10N JL10-02 (F:) (USB)

I 12:06:23 Found 1 DVD-ROM/CD-RW and 1 DVD±RW/RAM!

I 12:09:29 Operation Started!

I 12:09:30 Source File: C:\Users\phillip\Desktop\Modern Warfare 3 (US EN) [sM8E52]\Modern Warfare 3 (US EN).iso

I 12:09:30 Source File Sectors: 2,294,912 (MODE1/2048)

I 12:09:30 Source File Size: 4,699,979,776 bytes

I 12:09:30 Source File Volume Identifier: Modern Warfare 3 (US EN)

I 12:09:30 Source File File System(s): Special

I 12:09:30 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-H10N JL10 (F:) (USB)

I 12:09:30 Destination Media Type: DVD+R (Disc ID: MBIPG101-R05-01)

I 12:09:30 Destination Media Supported Write Speeds: 4x, 8x, 12x, 16x

I 12:09:30 Destination Media Sectors: 2,295,104

I 12:09:30 Write Mode: DVD

I 12:09:30 Write Type: DAO

I 12:09:30 Write Speed: 4x

I 12:09:30 DVD+R Reserve Track: No

I 12:09:30 Link Size: Auto

I 12:09:30 Lock Volume: Yes

I 12:09:30 Test Mode: No

I 12:09:30 OPC: No

I 12:09:30 BURN-Proof: Enabled

I 12:09:30 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 12:09:30 Book Type Setting: DVD-ROM

I 12:09:32 Filling Buffer... (40 MB)

I 12:09:32 Writing LeadIn...

I 12:09:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 12:09:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 13:50:56 Synchronising Cache...

I 13:50:57 Closing Track...

I 13:51:05 Finalising Disc...

I 13:51:35 Exporting Graph Data...

I 13:51:35 Graph Data File: C:\Users\phillip\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-H10N_JL10_MONDAY-FEBRUARY-06-2012_12-09_PM_MBIPG101-R05-01_4x.ibg

I 13:51:35 Export Successfully Completed!

I 13:51:35 Operation Successfully Completed! - Duration: 01:42:05

I 13:51:35 Average Write Rate: 756 KB/s (0.5x) - Maximum Write Rate: 809 KB/s (0.6x)

I 13:51:35 Cycling Tray before Verify...

W 13:51:44 Waiting for device to become ready...

I 13:52:00 Device Ready!

I 13:52:02 Operation Started!

I 13:52:02 Source Device: [0:0:0] HL-DT-ST DVDRAM GSA-H10N JL10 (F:) (USB)

I 13:52:02 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MBIPG101-R05-01)

I 13:52:02 Source Media Supported Write Speeds: 4x, 8x, 12x, 16x

I 13:52:02 Image File: C:\Users\phillip\Desktop\Modern Warfare 3 (US EN) [sM8E52]\Modern Warfare 3 (US EN).iso

I 13:52:02 Image File Sectors: 2,294,912 (MODE1/2048)

I 13:52:02 Image File Size: 4,699,979,776 bytes

I 13:52:02 Image File Volume Identifier: Modern Warfare 3 (US EN)

I 13:52:02 Image File File System(s): Special

I 13:52:02 Read Speed (Data/Audio): MAX / MAX

I 13:52:03 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 13:52:03 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 15:16:58 Exporting Graph Data...

I 15:16:59 Graph Data File: C:\Users\phillip\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-H10N_JL10_MONDAY-FEBRUARY-06-2012_12-09_PM_MBIPG101-R05-01_4x.ibg

I 15:16:59 Export Successfully Completed!

I 15:16:59 Operation Successfully Completed! - Duration: 01:24:54

I 15:16:59 Average Verify Rate: 901 KB/s (0.7x) - Maximum Verify Rate: 945 KB/s (0.7x)

W 15:22:57 Device Removal Detected!

[LIGHTNING UK!]

0.7x is USB 1.0 speeds.

 

Connect the drive so it functions at USB 2.0 speeds - this is a Windows thing and nothing to do with ImgBurn.

[TaLK]

how would i go about doing that? i have tried multiple different new 2.0 cables and ect.. this driver eve ndoes it on other computers also.

[mmalves]

Are you sure that's a USB 2.0 enclosure? Has it ever worked in high speed?

 

I 12:09:30 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-H10N JL10 (F:) (USB)

On another note, you should update the burner's firmware (remove any disc from the drive and close the tray before updating the firmware and after doing it you should reboot your computer).

[TaLK]

well i have searched all over the internet for support. seems like no one knows what causes this issue to happen. it still says this can run at faster speeds no matter what computer you plug it into. i went and bought 3 different usb 2.0 cords none worked and i even tried to update the firmware but it will not update because i dont know how to turn a external hard drive from slave/to/master ect.. my computer has enhanced 2.0 usb ports, this burner use to work perfectly fine with no problems. heres some more info about it i just recently came across last night.

 

This versatile USB 2.0 optical drive by INOi boasts SMART-BURN, SMART-X and Buffer-Underrun Prevention technologies to achieve outstanding performance and reliability. The INOi DW560 features write speeds of 4X for DVD+R DL, 16X for DVD+R and DVD-R, 8X for DVD+RW, 6X for DVD-RW, 48X for CD-R and 24X for CD-RW. Its read speeds are 48X for CD-ROM and 16X for DVD-ROM.

[LIGHTNING UK!]

If you've tried multiple machines/cards/cables, surely the next thing is to try a different drive/enclosure?

[ianymaty]

You cut out the first part of the log (don't do that) so this may be a shoot in the dark.

 

If you are running Windows XP make sure you have SP3 installed and up to date patches.

 

Update motherboard chipset/storage drivers for your motherboard. This site may help. http://www.ma-config.com/en

 

Alternatively you can mount (in place of the old combo drive) the drive from the enclosure into the computer but that leaves you without the mobility of the drive.