rolynstone Posted February 12, 2012 Share Posted February 12, 2012 (edited) I am an intermediate computer user. Win7Prof 64 bit, 4GB, Core2Quad.4GHz. Just imported my first movie to Studio 14 Ultimate. Burn failed. Went through all troubleshooting tips. Avid suggested deleting the registry line: HKEY_LOCAL_MACHINE\SOFTWARE\VOB\CDRAPP\Recorder and said the system would rebuild it correctly. Except it seems WIN7 does not include that registry entry, at least it is not on my system. I used Windows Media Player to burn files to disc and works fine with WMP. Needed to make a dvd so I selected the files within the VIDEO_TS folder for burn using Windows Explorer which gave error message "There was a problem burning this disc, check your firmware (it's current)." I have had the same problem when using Windows Movie Maker. Pinnacle Forum suggested IMGBURN as a common solution. I selected ImgBurn Build which finished successfully. Then I selected burn image which failed. I looked at the log file and could not interpret the info. Here is the IMGBURN error msg however: I/O Error! Device: [1:0:0] ATAPI DVD A DH16A1P RG11 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10) – Sectors: 32-63 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 Interpretation: Command Sequence Error I have attached the log file. ImgBurn.log Can you determine if I have a hardware failure or settings issue and a remedy? Thank you. Edited February 12, 2012 by rolynstone Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 12, 2012 Share Posted February 12, 2012 W 14:11:12 Write Speed Miscompare! - MODE SENSE: 22,160 KB/s (16x), GET PERFORMANCE: 8,864 KB/s (6.6x)I 14:11:12 Write Speed Successfully Set! - Effective: 8,864 KB/s (6.6x) I 14:11:12 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 14:11:13 Filling Buffer... (40 MB) I 14:11:14 Writing LeadIn... W 14:11:50 Potential 'ReadBufferCapacity' Deferred Error - Write Error W 14:11:56 Failed to Write Sectors 32 - 63 - Reason: Command Sequence Error W 14:11:56 Retrying (1 of 20)... Your drive reported a 'Write Error' at the start of the burn. You may have more luck with your particular drive/firmware/media combo if you slow the write speed down to 8x rather than burning at 'Max'. Failing that, try cleaning the drive with a cleaning disc. If that still doesn't work, you're probably best off buying a new drive. It shouldn't be having problems burning to Verbatim discs. Link to comment Share on other sites More sharing options...
rolynstone Posted February 13, 2012 Author Share Posted February 13, 2012 I followed your instructions in order and after cleaning the lens the burn worked great! Thank you so much. You suggested the basics which I should have tried first. You are excellent! Thank you again. Link to comment Share on other sites More sharing options...
Recommended Posts