shadowcaster Posted February 20, 2012 Posted February 20, 2012 About 50% point, burning a BD25, when a dialog box pops up with the topic message CRC Cyclic redundancy check error re 00000.m2ts. Options are to cancel or retry and I press "retry" and the burn finishes normally. Then during the "verify" process the same message appears again. I press "retry" and the verify finishes successfully. Nowhere in the log files is there an indication that this happenned. ; ; //****************************************\\ ; ImgBurn Version 2.5.6.0 - Log ; Monday, 20 February 2012, 14:47:55 ; \\****************************************// ; ; I 13:45:19 ImgBurn Version 2.5.6.0 started! I 13:45:19 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:45:19 Total Physical Memory: 3,652,912 KB - Available: 1,755,240 KB I 13:45:19 Initialising SPTI... I 13:45:19 Searching for SCSI / ATAPI devices... I 13:45:19 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 13:45:20 -> Drive 2 - Info: hp DVD-RAM GH40L RB0E (G:) (ATA) I 13:45:20 -> Drive 3 - Info: Generic DVD-ROM 1.0 (H:) (SCSI) I 13:45:20 Found 1 DVD-ROM, 1 DVD±RW/RAM and 1 HD DVD-ROM/BD-RE! I 13:45:25 Operation Started! I 13:45:25 Building Image Tree... I 13:45:25 Calculating Totals... I 13:45:25 Preparing Image... I 13:45:25 Contents: 16 Files, 15 Folders I 13:45:25 Content Type: BD Video I 13:45:25 Data Type: MODE1/2048 I 13:45:25 File System(s): UDF (2.50) I 13:45:25 Volume Label: [Not Configured] I 13:45:25 Size: 24,883,917,500 bytes I 13:45:25 Sectors: 12,150,361 I 13:45:25 Image Size: 24,884,936,704 bytes I 13:45:25 Image Sectors: 12,150,848 I 13:45:25 Operation Successfully Completed! - Duration: 00:00:00 I 13:47:13 Operation Started! I 13:47:13 Building Image Tree... I 13:47:13 Calculating Totals... I 13:47:13 Preparing Image... I 13:47:13 Contents: 16 Files, 15 Folders I 13:47:13 Content Type: BD Video I 13:47:13 Data Type: MODE1/2048 I 13:47:13 File System(s): UDF (2.50) I 13:47:13 Volume Label: The_Phantom_Of_The_Opera I 13:47:13 Size: 24,883,917,500 bytes I 13:47:13 Sectors: 12,150,361 I 13:47:13 Image Size: 24,884,936,704 bytes I 13:47:13 Image Sectors: 12,150,848 I 13:47:16 Operation Successfully Completed! - Duration: 00:00:02 I 13:47:16 Operation Started! I 13:47:16 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:47:16 Source File Sectors: 12,150,848 (MODE1/2048) I 13:47:16 Source File Size: 24,884,936,704 bytes I 13:47:16 Source File Volume Identifier: The_Phantom_Of_The_Opera I 13:47:16 Source File Volume Set Identifier: 40546DE600B967D9 I 13:47:16 Source File Application Identifier: ImgBurn v2.5.6.0 I 13:47:16 Source File Implementation Identifier: ImgBurn I 13:47:16 Source File File System(s): UDF (2.50) I 13:47:16 Destination Device: [3:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 13:47:16 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 13:47:16 Destination Media Supported Write Speeds: 2x, 4x, 6x I 13:47:16 Destination Media Sectors: 12,219,392 I 13:47:16 Write Mode: BD I 13:47:16 Write Type: DAO I 13:47:16 Write Speed: 4x I 13:47:16 BD-R Verify Not Required: Yes I 13:47:16 Link Size: Auto I 13:47:16 Lock Volume: Yes I 13:47:16 Test Mode: No I 13:47:16 OPC: No I 13:47:16 BURN-Proof: Enabled I 13:47:16 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x) I 13:47:27 Filling Buffer... (60 MB) I 13:47:28 Writing LeadIn... I 13:47:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 12150847) I 13:47:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12150847) I 14:14:59 Synchronising Cache... I 14:15:02 Closing Track... I 14:15:03 Finalising Disc... I 14:15:12 Exporting Graph Data... I 14:15:12 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_GGW-H20L_YL05_MONDAY-FEBRUARY-20-2012_1-47_PM_VERBAT-IMe-000_4x.ibg I 14:15:12 Export Successfully Completed! I 14:15:12 Operation Successfully Completed! - Duration: 00:27:56 I 14:15:12 Average Write Rate: 14,728 KB/s (3.3x) - Maximum Write Rate: 18,326 KB/s (4.1x) I 14:15:12 Cycling Tray before Verify... W 14:15:21 Waiting for device to become ready... I 14:15:36 Device Ready! I 14:15:37 Operation Started! I 14:15:37 Source Device: [3:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 14:15:37 Source Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 14:15:37 Source Media Supported Write Speeds: 2x, 4x, 6x I 14:15:37 Image File: -==/\/[bUILD IMAGE]\/\==- I 14:15:37 Image File Sectors: 12,150,848 (MODE1/2048) I 14:15:37 Image File Size: 24,884,936,704 bytes I 14:15:37 Image File Volume Identifier: The_Phantom_Of_The_Opera I 14:15:37 Image File Volume Set Identifier: 40546DE600B967D9 I 14:15:37 Image File Application Identifier: ImgBurn v2.5.6.0 I 14:15:37 Image File Implementation Identifier: ImgBurn I 14:15:37 Image File File System(s): UDF (2.50) I 14:15:37 Read Speed (Data/Audio): MAX / MAX I 14:15:38 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12150847) I 14:15:38 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12150847) I 14:47:17 Exporting Graph Data... I 14:47:17 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_GGW-H20L_YL05_MONDAY-FEBRUARY-20-2012_1-47_PM_VERBAT-IMe-000_4x.ibg I 14:47:17 Export Successfully Completed! I 14:47:17 Operation Successfully Completed! - Duration: 00:31:39 I 14:47:17 Average Verify Rate: 12,810 KB/s (2.8x) - Maximum Verify Rate: 33,086 KB/s (7.4x) I 14:47:55 Close Request Acknowledged I 14:47:55 Closing Down... I 14:47:55 Shutting down SPTI... I 14:47:55 ImgBurn closed! Export graph : I also ran a read test in DVDinfoPro and there were no errors. The disc appears to play properly at the time point of the message so is this a problem or not ? Thanks
LIGHTNING UK! Posted February 20, 2012 Posted February 20, 2012 That sounds like a problem with reading the file on your hdd, not on the disc. You should run chkdsk on the hdd in question and do a full surface scan for bad sectors. There's a new firmware for your BD burner btw. http://www.firmwarehq.com/LG/GGW-H20L/files.html
shadowcaster Posted February 20, 2012 Author Posted February 20, 2012 (edited) Thanks for the firmware tip! Chkdsk and Hard Drive Sentinel report no weak/bad sectors. I'l try a surface scan later tonight. So, are you saying the burn is good? Also, what are those 2 spikes in the export graph and are they significant? Edited February 20, 2012 by shadowcaster
LIGHTNING UK! Posted February 21, 2012 Posted February 21, 2012 Well I can't see any info in the log about being unable to read the disc (or hdd)... so unless you can capture the error you're seeing via a screenshot, I can't really be sure on what you're seeing. It doesn't look like the disc had a problem though. The spikes don't mean anything.
Recommended Posts