FOKjulleNAAIERS Posted May 28, 2012 Share Posted May 28, 2012 ok so im using Verbatim DL DVD+R in a iHas124 B AL0S and i keep getting this error message at about 10-20% i have been looking for solutions but nothing has worked so far so any input or solution would be greatly appreciated this is the error I/O Error! Device: [0:10] Optiarc DVD RW AD-7173A 1-01 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 1D AF 20 00 00 20 00 Interpretation: Write {10} - Sectors: 1945376 - 1945407 Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 Interpretation: Write Error And here is my log I 10:44:12 ImgBurn Version 2.5.7.0 started! I 10:44:12 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 10:44:12 Total Physical Memory: 8,370,504 KB - Available: 6,281,996 KB W 10:44:12 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:44:12 Initialising SPTI... I 10:44:12 Searching for SCSI / ATAPI devices... I 10:44:14 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 10:44:14 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN03-01 (E:) (ATA) I 10:44:14 -> Drive 3 - Info: WBMLQFS 2VOTEN4TA3C 1.04 (G:) (SCSI) I 10:44:14 Found 2 DVD±RW/RAMs and 1 BD-ROM! I 10:45:45 Operation Started! I 10:45:45 Source File: H:\360 Games\DiRT Showdown\DiRT Showdown.dvd I 10:45:45 Source File Sectors: 4,267,015 (MODE1/2048) I 10:45:45 Source File Size: 8,738,846,720 bytes I 10:45:45 Source File Volume Identifier: DVD_ROM I 10:45:45 Source File Volume Set Identifier: 85e68000MS UDFBridge I 10:45:45 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:45:45 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:45:45 Source File File System(s): ISO9660, UDF (1.50) I 10:45:45 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 10:45:45 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 10:45:45 Destination Media Supported Write Speeds: 4x, 6x, 8x I 10:45:45 Destination Media Sectors: 4,267,040 I 10:45:45 Write Mode: DVD I 10:45:45 Write Type: DAO I 10:45:45 Write Speed: 2.4x I 10:45:45 DVD+R DL Reserve Track: No I 10:45:45 Link Size: Auto I 10:45:45 Lock Volume: Yes I 10:45:45 Test Mode: No I 10:45:45 OPC: No I 10:45:45 BURN-Proof: Enabled W 10:45:45 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) W 10:45:45 The drive only supports writing these discs at 4x, 6x, 8x. I 10:45:45 Book Type Setting: DVD-ROM I 10:45:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 10:45:45 Optimal L0 Data Zone Capacity: 2,133,520 I 10:45:45 Optimal L0 Data Zone Method: Copied From Original Disc I 10:45:45 Set L0 Data Zone Capacity Succeeded! I 10:45:45 Filling Buffer... (40 MB) I 10:45:47 Writing LeadIn... I 10:47:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 10:47:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 10:47:00 Writing Layer 0... (LBA: 0 - 2133519) I 11:00:13 Writing Layer 1... (LBA: 2133520 - 4267014) I 11:13:48 Synchronising Cache... I 11:13:56 Closing Track... I 11:13:57 Finalising Disc... I 11:14:30 Exporting Graph Data... I 11:14:30 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-28-MAY-2012_10-45_AM_RITEK-S04-66_2.4x.ibg I 11:14:30 Export Successfully Completed! I 11:14:30 Operation Successfully Completed! - Duration: 00:28:44 I 11:14:30 Average Write Rate: 5,310 KB/s (3.8x) - Maximum Write Rate: 5,655 KB/s (4.1x) I 11:14:30 Cycling Tray before Verify... W 11:14:37 Waiting for device to become ready... I 11:14:51 Device Ready! I 11:14:52 Operation Started! I 11:14:52 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 11:14:52 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) I 11:14:52 Source Media Supported Write Speeds: 4x, 6x, 8x I 11:14:52 Image File: H:\360 Games\DiRT Showdown\DiRT Showdown.dvd I 11:14:52 Image File Sectors: 4,267,015 (MODE1/2048) I 11:14:52 Image File Size: 8,738,846,720 bytes I 11:14:52 Image File Volume Identifier: DVD_ROM I 11:14:52 Image File Volume Set Identifier: 85e68000MS UDFBridge I 11:14:52 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:14:52 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 11:14:52 Image File File System(s): ISO9660, UDF (1.50) I 11:14:52 Read Speed (Data/Audio): MAX / MAX I 11:14:53 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:14:53 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:14:53 Verifying Layer 0... (LBA: 0 - 2133519) W 11:21:06 Failed to Read Sectors 2112480 - 2112511 - Reason: L-EC Uncorrectable Error W 11:21:15 Failed to Read Sector 2112480 - Reason: L-EC Uncorrectable Error W 11:21:30 Retrying (1)... W 11:21:37 Retry Failed - Reason: L-EC Uncorrectable Error W 11:21:46 Failed to Read Sector 2112480 - Reason: L-EC Uncorrectable Error W 11:21:54 Failed to Read Sector 2112481 - Reason: L-EC Uncorrectable Error E 11:27:40 Failed to Read Sector 2112481 - Reason: L-EC Uncorrectable Error E 11:27:40 Failed to Verify Sectors! I 11:27:43 Exporting Graph Data... I 11:27:43 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-28-MAY-2012_10-45_AM_RITEK-S04-66_2.4x.ibg I 11:27:43 Export Successfully Completed! E 11:27:43 Operation Failed! - Duration: 00:12:47 I 11:27:43 Average Verify Rate: 5,515 KB/s (4.0x) - Maximum Verify Rate: 16,861 KB/s (12.2x) W 11:28:39 I/O Interface has been changed! I 11:28:39 Shutting down SPTI... I 11:28:39 Initialising ASAPI... E 11:28:39 Unable to initialise ASAPI! - ASAPI.DLL E 11:28:39 Reason: The specified module could not be found. E 11:28:39 You need to install an ASAPI manager. E 11:28:39 Visit http://www.imgburn.com to download one. E 11:28:39 Alternatively, try changing the 'I/O Interface' in the Settings to a different one. W 11:30:44 I/O Interface has been changed! I 11:30:44 Shutting down ASAPI... I 11:30:44 Initialising SPTI... I 11:30:44 Searching for SCSI / ATAPI devices... I 11:30:45 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 11:30:45 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN03-01 (E:) (ATA) I 11:30:45 -> Drive 3 - Info: WBMLQFS 2VOTEN4TA3C 1.04 (G:) (SCSI) I 11:30:45 Found 2 DVD±RW/RAMs and 1 BD-ROM! I 12:32:02 Operation Started! I 12:32:02 Source File: H:\360 Games\DiRT Showdown\DiRT Showdown.dvd I 12:32:02 Source File Sectors: 4,267,015 (MODE1/2048) I 12:32:02 Source File Size: 8,738,846,720 bytes I 12:32:02 Source File Volume Identifier: DVD_ROM I 12:32:02 Source File Volume Set Identifier: 85e68000MS UDFBridge I 12:32:02 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:32:02 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:32:02 Source File File System(s): ISO9660, UDF (1.50) I 12:32:02 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 12:32:02 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 12:32:02 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 12:32:02 Destination Media Sectors: 4,267,040 I 12:32:02 Write Mode: DVD I 12:32:02 Write Type: DAO I 12:32:02 Write Speed: 8x I 12:32:02 DVD+R DL Reserve Track: No I 12:32:02 Link Size: Auto I 12:32:02 Lock Volume: Yes I 12:32:02 Test Mode: No I 12:32:02 OPC: No I 12:32:02 BURN-Proof: Enabled I 12:32:02 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 12:32:02 Book Type Setting: DVD-ROM I 12:32:02 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 12:32:02 Optimal L0 Data Zone Capacity: 2,133,520 I 12:32:02 Optimal L0 Data Zone Method: Copied From Original Disc I 12:32:02 Set L0 Data Zone Capacity Succeeded! I 12:32:02 Filling Buffer... (40 MB) I 12:32:04 Writing LeadIn... I 12:33:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 12:33:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 12:33:12 Writing Layer 0... (LBA: 0 - 2133519) I 12:47:38 Writing Layer 1... (LBA: 2133520 - 4267014) I 13:03:16 Synchronising Cache... I 13:03:40 Closing Track... I 13:03:41 Finalising Disc... I 13:04:15 Exporting Graph Data... I 13:04:15 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-28-MAY-2012_12-32_PM_MKM-003-00_8x.ibg I 13:04:15 Export Successfully Completed! I 13:04:15 Operation Successfully Completed! - Duration: 00:32:13 I 13:04:15 Average Write Rate: 4,733 KB/s (3.4x) - Maximum Write Rate: 11,165 KB/s (8.1x) I 13:04:15 Cycling Tray before Verify... W 13:04:23 Waiting for device to become ready... I 13:04:37 Device Ready! I 13:04:38 Operation Started! I 13:04:38 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 13:04:38 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 13:04:38 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 13:04:38 Image File: H:\360 Games\DiRT Showdown\DiRT Showdown.dvd I 13:04:38 Image File Sectors: 4,267,015 (MODE1/2048) I 13:04:38 Image File Size: 8,738,846,720 bytes I 13:04:38 Image File Volume Identifier: DVD_ROM I 13:04:38 Image File Volume Set Identifier: 85e68000MS UDFBridge I 13:04:38 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:04:38 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 13:04:38 Image File File System(s): ISO9660, UDF (1.50) I 13:04:38 Read Speed (Data/Audio): MAX / MAX I 13:04:39 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 13:04:39 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 13:04:39 Verifying Layer 0... (LBA: 0 - 2133519) W 13:07:54 Failed to Read Sectors 524896 - 524927 - Reason: L-EC Uncorrectable Error W 13:08:03 Failed to Read Sector 524896 - Reason: L-EC Uncorrectable Error W 13:22:39 Retrying (1)... W 13:22:46 Retry Failed - Reason: L-EC Uncorrectable Error W 13:30:23 Failed to Read Sector 524896 - Reason: L-EC Uncorrectable Error W 13:30:32 Failed to Read Sector 524897 - Reason: L-EC Uncorrectable Error E 13:30:39 Failed to Read Sector 524897 - Reason: L-EC Uncorrectable Error E 13:30:39 Failed to Verify Sectors! I 13:30:41 Exporting Graph Data... I 13:30:41 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-28-MAY-2012_12-32_PM_MKM-003-00_8x.ibg I 13:30:41 Export Successfully Completed! E 13:30:41 Operation Failed! - Duration: 00:26:00 I 13:30:41 Average Verify Rate: 673 KB/s (0.5x) - Maximum Verify Rate: 6,864 KB/s (5.0x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 28, 2012 Share Posted May 28, 2012 In the 'Advanced Settings' (or the EEPROM Tool - Google it), Clear OPC History and enable FHT. I 12:32:02 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes becomes... I 12:32:02 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes Write at 4x. If it still fails, get another spindle of Verbs and try to get some made in Singapore. Link to comment Share on other sites More sharing options...
FOKjulleNAAIERS Posted May 29, 2012 Author Share Posted May 29, 2012 yeah thanks do i have to Clear OPC History before every backup beacause i did what you said and i got one good back up then the next got the same error but 50% threw verification Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 29, 2012 Share Posted May 29, 2012 I didn't have to when I preformed my tests, no. http://forum.imgburn.com/index.php?showtopic=18871&st=0&p=136519&&do=findComment&comment=136519 Things got pretty consistent for me after starting 'Attempt #8'. Link to comment Share on other sites More sharing options...
Recommended Posts