spud Posted July 9, 2012 Share Posted July 9, 2012 keep gettingproblems whentrying to burn a disk dont know why cause ive used imgburn for years without a problem this is the log im gettingis I 13:33:29 ImgBurn Version 2.5.7.0 started! I 13:33:29 Microsoft Windows 7 Home Premium Edition (6.1, Build 7601 : Service Pack 1) I 13:33:29 Total Physical Memory: 1,008,544 KB - Available: 415,692 KB I 13:33:29 Initialising SPTI... I 13:33:29 Searching for SCSI / ATAPI devices... I 13:33:29 -> Drive 1 - Info: Slimtype DVD A DS8A4S JX11 (D:) (ATAPI) I 13:33:29 Found 1 DVD±RW/RAM! I 13:33:36 Operation Started! I 13:33:36 Source File: C:\Users\Ian Mckay\Desktop\DVD_The.Rise.and.Fall.of.a.White.Collar.Hooligan.2012.DVDRip.XViD-PLAYNOW\DVD_The.Rise.and.Fall.of.a.White.Collar.Hooligan.2012.DVDRip.XViD-PLAYNOW.iso I 13:33:36 Source File Sectors: 824,640 (MODE1/2048) I 13:33:36 Source File Size: 1,688,862,720 bytes I 13:33:37 Source File Volume Identifier: DVD_The.Rise.and.Fall.of.a.White.Collar.Hooligan.2012.DVDRip.XViD-PLAYNOW I 13:33:37 Source File Volume Set Identifier: 40E86401000C9534 I 13:33:37 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 13:33:37 Source File Implementation Identifier: ImgBurn I 13:33:37 Source File File System(s): ISO9660, UDF (1.02) I 13:33:37 Destination Device: [0:1:0] Slimtype DVD A DS8A4S JX11 (D:) (ATAPI) I 13:33:37 Destination Media Type: DVD-R (Disc ID: RITEKF1) I 13:33:37 Destination Media Supported Write Speeds: 3x, 4x, 6x, 8x I 13:33:37 Destination Media Sectors: 2,297,888 I 13:33:37 Write Mode: DVD I 13:33:37 Write Type: DAO I 13:33:37 Write Speed: MAX I 13:33:37 Link Size: Auto I 13:33:37 Lock Volume: Yes I 13:33:37 Test Mode: No I 13:33:37 OPC: No I 13:33:37 BURN-Proof: Enabled I 13:33:37 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 13:33:37 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:33:38 Filling Buffer... (40 MB) I 13:33:39 Writing LeadIn... W 13:33:59 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 13:33:59 Retrying (1 of 20)... W 13:34:00 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:00 Retrying (2 of 20)... W 13:34:02 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:02 Retrying (3 of 20)... W 13:34:03 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:03 Retrying (4 of 20)... W 13:34:04 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:04 Retrying (5 of 20)... W 13:34:06 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:06 Retrying (6 of 20)... W 13:34:07 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:07 Retrying (7 of 20)... W 13:34:09 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:09 Retrying (8 of 20)... W 13:34:11 Retry Failed - Reason: Power Calibration Area Is Full W 13:34:11 Retrying (9 of 20)... Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 9, 2012 Share Posted July 9, 2012 This is a drive/media combo issue and nothing to do with ImgBurn. Buy some better discs, try cleaning the drive with a cleaning disc etc. Link to comment Share on other sites More sharing options...
spud Posted July 9, 2012 Author Share Posted July 9, 2012 ok thanks but ive always used maxwell dvds for years using imgburn so why is it starting to do this now plz Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 9, 2012 Share Posted July 9, 2012 Maxell is just the name stamped on the disc - that doesn't mean anything. The discs you're using there are based on the 'RITEKF1' dye. Maxell have used several others over the years. Unlike discs and drives, ImgBurn doesn't get any better or worse at burning.... it's a piece of software, it can't wear out or have bad days. Discs are built to different tolerances and drives wear out/get dirty. Link to comment Share on other sites More sharing options...
Recommended Posts