steve1808 Posted September 23, 2012 Share Posted September 23, 2012 Hi im new to useing imgburn bc i was wanting to make a modded iso disk for Call of Duty: WaW. i tryed useing the motion flex v2.1 per modded iso but when i burned it i got about 55% complete and it came up with a error message. iv done that about 4 time and wasted for disks. I then tryed it with a new iso because my brother thought it might be a corrupt sector in the iso. So i tryed the cobra v1 iso. it got to 55% again today and failed with the same error message. This is the log: I 23:42:15 ImgBurn Version 2.5.7.0 started! I 23:42:15 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 23:42:15 Total Physical Memory: 3,074,020 KB - Available: 1,300,164 KB I 23:42:16 Initialising SPTI... I 23:42:16 Searching for SCSI / ATAPI devices... I 23:42:16 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 23:42:17 -> Drive 2 - Info: HL-DT-ST DVDRAM GT30N 1.01-09 (D:) (ATAPI) I 23:42:17 Found 1 DVD±RW/RAM and 1 BD-ROM! I 00:01:29 Operation Started! I 00:01:29 Source File: C:\Users\Andy\Desktop\Call of duty Motion Flexv2.1\CoDWaW.dvd I 00:01:29 Source File Sectors: 3,825,924 (MODE1/2048) I 00:01:29 Source File Size: 7,835,492,352 bytes I 00:01:29 Source File Volume Identifier: XGD2DVD_NTSC I 00:01:29 Source File Volume Set Identifier: 34672923 I 00:01:29 Source File Implementation Identifier: Sonic Scenarist 3.1 I 00:01:29 Source File File System(s): ISO9660, UDF (1.02) I 00:01:29 Destination Device: [0:1:0] HL-DT-ST DVDRAM GT30N 1.01 (D:) (ATAPI) I 00:01:29 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 00:01:29 Destination Media Supported Write Speeds: 2.4x, 4x, 6x I 00:01:29 Destination Media Sectors: 4,173,824 I 00:01:29 Write Mode: DVD I 00:01:29 Write Type: DAO I 00:01:29 Write Speed: 2.4x I 00:01:29 DVD+R DL Reserve Track: No I 00:01:29 Link Size: Auto I 00:01:29 Lock Volume: Yes I 00:01:29 Test Mode: No I 00:01:29 OPC: No I 00:01:29 BURN-Proof: Enabled I 00:01:29 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 00:01:29 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 00:01:29 User Specified L0 Data Zone Capacity: 1,913,760 I 00:01:29 Set L0 Data Zone Capacity Succeeded! I 00:01:31 Filling Buffer... (80 MB) I 00:01:33 Writing LeadIn... I 00:01:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 00:01:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 00:01:52 Writing Layer 0... (LBA: 0 - 1913759) I 00:22:04 Writing Layer 1... (LBA: 1913760 - 3825923) W 00:22:41 Failed to Write Sectors 1927168 - 1927199 - Reason: Write Error W 00:22:41 Retrying (1 of 20)... W 00:25:51 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 00:25:51 Retrying (2 of 20)... I 00:25:52 Writing Sectors... W 00:28:54 Failed to Write Sectors 2140160 - 2140191 - Reason: Write Error W 00:28:54 Retrying (1 of 20)... W 00:32:04 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 00:32:04 Retrying (2 of 20)... W 00:32:04 Retry Failed - Reason: Write Error W 00:32:04 Retrying (3 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (4 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (5 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (6 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (7 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (8 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (9 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (10 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (11 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (12 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (13 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (14 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (15 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (16 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (17 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (18 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (19 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 00:32:04 Retrying (20 of 20)... W 00:32:04 Retry Failed - Reason: Invalid Address For Write W 10:29:09 Retrying (21)... W 10:29:09 Retry Failed - Reason: Invalid Address For Write W 10:29:11 Retrying (22)... W 10:29:11 Retry Failed - Reason: Invalid Address For Write W 10:29:12 Retrying (23)... W 10:29:12 Retry Failed - Reason: Invalid Address For Write W 10:29:13 Retrying (24)... W 10:29:13 Retry Failed - Reason: Invalid Address For Write W 10:29:14 Retrying (25)... W 10:29:14 Retry Failed - Reason: Invalid Address For Write E 10:51:12 Failed to Write Sectors 2140160 - 2140191 - Reason: Write Error E 10:51:12 Next Writable Address: 2140192 I 10:51:12 Synchronising Cache... and a little side not for the disks im useing. Im useing Memorex DVD+R DL 8.5gb Please reply soon i wanna mod=\ Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 23, 2012 Share Posted September 23, 2012 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
steve1808 Posted September 23, 2012 Author Share Posted September 23, 2012 iv already read that topic and i tryed updateing my firmware and when i do it it says something like do you want f/w reflash? if i hit yes it says f/w buyer mismatch click ok it closes if if i hit no it closes Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 23, 2012 Share Posted September 23, 2012 ASS2 is not for your drive (probably for another manufacturer of laptop), you'd need 1.02 or something. As updating the firmware isn't an option, try the other recommendations in that thread. Link to comment Share on other sites More sharing options...
steve1808 Posted September 24, 2012 Author Share Posted September 24, 2012 ehh for now im just gonna save my money and just buy a dang disk from isosickle. birth day soon lets hope i get atleast $100... Link to comment Share on other sites More sharing options...
Recommended Posts