jachis08 Posted October 9, 2012 Posted October 9, 2012 I just got a bunch of dual layer discs. I'm getting the Disc Not Empty message though the disc is new. I've tried with many of the discs. Here's what I get in the box on the right : HL-DT-ST DVD-RAM GSA-H20N 1.01 (ATA) Current Profile: DVD+RW Disc Information: Status: Unknown State of Last Session: Unknown Erasable: Unknown Formatted: Unknown Sessions: Unknown Sectors: 16,384,000 Size: 33,554,432,000 bytes Time: 3640:55:25 (MM:SS:FF) Supported Write Speeds: 2.4x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 16383999) -> LeadOut (LBA: 16384000) Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 0 Disc Size: 120mm Maximum Read Rate: 2.52Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: Reserved (0x08) First Physical Sector of Data Area: 131,392 Last Physical Sector of Data Area: 1,410 Last Physical Sector in Layer 0: 4 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 16383999 (0x00F9FFFF) -> RS: 11,080 KB/s (8x) - WS: 3,324 KB/s (2.4x) And in the imgburn log I get: I 16:56:49 ImgBurn Version 2.5.7.0 started! I 16:56:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:56:49 Total Physical Memory: 1,014,256 KB - Available: 182,576 KB W 16:56:49 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 16:56:49 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 16:56:49 Drive F:\ (FAT32) does not support single files > 4 GB in size. W 16:56:49 Drive G:\ (FAT32) does not support single files > 4 GB in size. W 16:56:49 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 16:56:49 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:56:49 Initialising SPTI... I 16:56:49 Searching for SCSI / ATAPI devices... I 16:56:53 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H20N 1.01-06 (I:) (ATA) I 16:56:53 -> Drive 2 - Info: FvFx CDDVDvx+tech-200 0900 (J:) (SCSI) I 16:56:53 Found 1 DVD-ROM and 1 DVD±RW/RAM! Thanks
LIGHTNING UK! Posted October 9, 2012 Posted October 9, 2012 Assuming the drive can still see other discs correctly, it must just not like those.
jachis08 Posted October 9, 2012 Author Posted October 9, 2012 Thanks for the quick reply. No it didn't work with any disc previously. Actually this is the first time I use dual layer discs.
LIGHTNING UK! Posted October 9, 2012 Posted October 9, 2012 Ok but can it still see other discs ok? Original CD / DVDs? Ones you've burnt in the past (single layer I guess) ? Other blank single layer discs? If it's reporting garbage like that for all discs, you have to assume the drive is faulty. If it's only reporting garbage for the double layer discs you've just purchased, it must be that the drive's firmware doesn't support them. Buy some others and hope it likes those.
Recommended Posts