KyleFYI Posted October 11, 2012 Posted October 11, 2012 I 18:02:32 ImgBurn Version 2.5.7.0 started! I 18:02:32 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 18:02:32 Total Physical Memory: 6,196,404 KB - Available: 5,000,184 KB I 18:02:32 Initialising SPTI... I 18:02:32 Searching for SCSI / ATAPI devices... I 18:02:32 -> Drive 1 - Info: PLDS DVDRWBD DS-6E2SH CD11 (D:) (ATAPI) I 18:02:32 Found 1 BD-ROM/DVD±RW! W 18:57:25 User accepted disc space warning and is attempting to truncate! I 18:57:25 Operation Started! I 18:57:25 Source File: C:\Users\Ku\Downloads\strange-codmw3\s-mw3.dvd I 18:57:25 Source File Sectors: 4,267,015 (MODE1/2048) I 18:57:25 Source File Size: 8,738,846,720 bytes I 18:57:25 Source File Volume Identifier: DVD_ROM I 18:57:25 Source File Volume Set Identifier: 67d90000MS UDFBridge I 18:57:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:57:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:57:25 Source File File System(s): ISO9660, UDF (1.50) I 18:57:25 Destination Device: [0:1:0] PLDS DVDRWBD DS-6E2SH CD11 (D:) (ATAPI) I 18:57:25 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 18:57:25 Destination Media Supported Write Speeds: 2.4x, 4x I 18:57:25 Destination Media Sectors: 4,173,824 I 18:57:25 Write Mode: DVD I 18:57:25 Write Type: DAO I 18:57:25 Write Speed: MAX I 18:57:25 DVD+R DL Reserve Track: No I 18:57:25 Link Size: Auto I 18:57:25 Lock Volume: Yes I 18:57:25 Test Mode: No I 18:57:25 OPC: No I 18:57:25 BURN-Proof: Enabled I 18:57:27 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) W 18:57:27 Optimal layer break position exceeds L0 capacity. W 18:57:27 Optimal L0 Sectors: 2,133,520 W 18:57:27 Maximum L0 Sectors: 2,086,912 I 18:57:27 Optimal L0 Data Zone Capacity: 2,133,520 I 18:57:27 Optimal L0 Data Zone Method: Copied From Original Disc W 18:57:27 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 18:57:28 Filling Buffer... (80 MB) I 18:57:29 Writing LeadIn... W 19:03:28 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error. W 19:03:28 Retrying (1 of 20)... W 19:03:28 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:03:28 Retrying (2 of 20)... W 19:03:39 Retry Failed - Reason: Power Calibration Area Is Full W 19:03:39 Retrying (3 of 20)... W 19:06:49 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:06:49 Retrying (4 of 20)... W 19:06:49 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:06:49 Retrying (5 of 20)... W 19:07:00 Retry Failed - Reason: Power Calibration Area Is Full W 19:07:00 Retrying (6 of 20)... W 19:10:10 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:10:10 Retrying (7 of 20)... W 19:10:10 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:10:10 Retrying (8 of 20)... W 19:10:20 Retry Failed - Reason: Power Calibration Area Is Full W 19:10:20 Retrying (9 of 20)... W 19:13:30 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:13:30 Retrying (10 of 20)... W 19:13:30 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:13:30 Retrying (11 of 20)... W 19:13:41 Retry Failed - Reason: Power Calibration Area Is Full W 19:13:41 Retrying (12 of 20)... W 19:16:51 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:16:51 Retrying (13 of 20)... W 19:16:51 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:16:51 Retrying (14 of 20)... W 19:17:02 Retry Failed - Reason: Power Calibration Area Is Full W 19:17:02 Retrying (15 of 20)... W 19:20:12 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:20:12 Retrying (16 of 20)... W 19:20:13 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:20:13 Retrying (17 of 20)... W 19:20:23 Retry Failed - Reason: Power Calibration Area Is Full W 19:20:23 Retrying (18 of 20)... W 19:23:33 Retry Failed - Reason: The request could not be performed because of an I/O device error. W 19:23:33 Retrying (19 of 20)... W 19:23:33 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 19:23:33 Retrying (20 of 20)... W 19:23:44 Retry Failed - Reason: Power Calibration Area Is Full E 19:26:59 Failed to Write Sectors 0 - 31 - Reason: The request could not be performed because of an I/O device error. I 19:26:59 Synchronising Cache... W 19:27:02 User opted to skip the 'Close Track/Session/Disc' functions. E 19:27:02 Failed to Write Image! E 19:27:02 Operation Failed! - Duration: 00:29:36 I 19:27:02 Average Write Rate: N/A - Maximum Write Rate: N/A I've updated my drivers on my burnner, and nothing....
LIGHTNING UK! Posted October 11, 2012 Posted October 11, 2012 Bad drivers are probably the cause of the bus reset after 10 seconds. The 'Power Calibration Area Is Full' error is probably covered here... http://forum.imgburn.com/index.php?showtopic=8000
KyleFYI Posted October 14, 2012 Author Posted October 14, 2012 My drivers are updated and i've used the disks before and the same drive and same image...
LIGHTNING UK! Posted October 14, 2012 Posted October 14, 2012 Ok but obviously it has a problem with them now or you wouldn't be here. Maybe cleaning the drive with a cleaning disc would help.
KyleFYI Posted October 14, 2012 Author Posted October 14, 2012 Still isn't working... Any other suggestions?
LIGHTNING UK! Posted October 14, 2012 Posted October 14, 2012 Try with the media I recommended in the first place. If it fails with that, get yourself another drive.
KyleFYI Posted October 15, 2012 Author Posted October 15, 2012 Its now just stuck on "Setting L0 Data Zone Capacity"...
Recommended Posts