HipsterHD Posted November 7, 2012 Posted November 7, 2012 (edited) Why am I getting this error, I have burned at least 20 good Dual Layer DVD's before and just burned Halo 4 Disk 1 without any problems but went to burn Halo 4 Disk 2 and received the following ImgBurn error and log; Error; Close Track Failed! Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) Reason: Power Calibration Area is Full Log; I 14:47:07 ImgBurn Version 2.5.7.0 started! I 14:47:07 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:47:07 Total Physical Memory: 2,061,560 KB - Available: 960,540 KB I 14:47:07 Initialising SPTI... I 14:47:07 Searching for SCSI / ATAPI devices... I 14:47:14 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 14:47:14 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 14:47:14 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 14:50:31 Operation Started! I 14:50:31 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 1\Disk 1.dvd I 14:50:31 Source File Sectors: 4,267,015 (MODE1/2048) I 14:50:32 Source File Size: 8,738,846,720 bytes I 14:50:32 Source File Volume Identifier: DVD_ROM I 14:50:32 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 14:50:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:50:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:50:32 Source File File System(s): ISO9660, UDF (1.50) I 14:50:32 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 14:50:32 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 14:50:32 Destination Media Supported Write Speeds: 4x, 6x, 8x I 14:50:32 Destination Media Sectors: 4,267,040 I 14:50:32 Write Mode: DVD I 14:50:32 Write Type: DAO I 14:50:32 Write Speed: MAX I 14:50:32 DVD+R DL Reserve Track: No I 14:50:32 Link Size: Auto I 14:50:32 Lock Volume: Yes I 14:50:32 Test Mode: No I 14:50:32 OPC: No I 14:50:32 BURN-Proof: Enabled I 14:50:32 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 14:50:32 Book Type Setting: DVD-ROM I 14:50:32 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 14:50:49 Optimal L0 Data Zone Capacity: 2,133,520 I 14:50:49 Optimal L0 Data Zone Method: Copied From Original Disc I 14:50:49 Set L0 Data Zone Capacity Succeeded! I 14:50:51 Filling Buffer... (80 MB) I 14:50:52 Writing LeadIn... I 14:51:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 14:51:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 14:51:56 Writing Layer 0... (LBA: 0 - 2133519) I 15:01:02 Writing Layer 1... (LBA: 2133520 - 4267014) I 15:10:18 Synchronising Cache... I 15:10:26 Closing Track... I 15:10:27 Finalising Disc... I 15:11:00 Exporting Graph Data... I 15:11:00 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_2-50_PM_RITEK-S04-66_MAX.ibg I 15:11:00 Export Successfully Completed! I 15:11:00 Operation Successfully Completed! - Duration: 00:20:28 I 15:11:00 Average Write Rate: 7,744 KB/s (5.6x) - Maximum Write Rate: 11,169 KB/s (8.1x) I 15:13:36 Operation Started! I 15:13:36 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 15:13:36 Source File Sectors: 4,267,015 (MODE1/2048) I 15:13:36 Source File Size: 8,738,846,720 bytes I 15:13:36 Source File Volume Identifier: DVD_ROM I 15:13:36 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 15:13:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:13:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:13:36 Source File File System(s): ISO9660, UDF (1.50) I 15:13:36 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 15:13:36 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 15:13:36 Destination Media Supported Write Speeds: 4x, 6x, 8x I 15:13:36 Destination Media Sectors: 4,267,040 I 15:13:36 Write Mode: DVD I 15:13:36 Write Type: DAO I 15:13:36 Write Speed: MAX I 15:13:36 DVD+R DL Reserve Track: No I 15:13:36 Link Size: Auto I 15:13:36 Lock Volume: Yes I 15:13:36 Test Mode: No I 15:13:36 OPC: No I 15:13:36 BURN-Proof: Enabled I 15:13:36 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:13:36 Book Type Setting: DVD-ROM I 15:13:36 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 15:13:39 Optimal L0 Data Zone Capacity: 2,133,520 I 15:13:39 Optimal L0 Data Zone Method: Copied From Original Disc I 15:13:39 Set L0 Data Zone Capacity Succeeded! I 15:13:39 Filling Buffer... (80 MB) I 15:13:40 Writing LeadIn... I 15:14:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 15:14:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 15:14:49 Writing Layer 0... (LBA: 0 - 2133519) I 15:23:55 Writing Layer 1... (LBA: 2133520 - 4267014) I 15:33:08 Synchronising Cache... I 15:33:31 Closing Track... W 15:34:30 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:34:30 Close Track Failed! - Reason: Power Calibration Area Is Full W 15:34:30 Retrying (1 of 3)... W 15:34:47 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:34:47 Retry Failed - Reason: Power Calibration Area Is Full W 15:34:47 Retrying (2 of 3)... W 15:35:07 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:07 Retry Failed - Reason: Power Calibration Area Is Full W 15:35:07 Retrying (3 of 3)... W 15:35:28 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:28 Retry Failed - Reason: Power Calibration Area Is Full W 15:35:31 Retrying (4)... W 15:35:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:49 Retry Failed - Reason: Power Calibration Area Is Full I 15:35:51 Finalising Disc... W 15:35:51 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 15:35:51 Retrying (1 of 3)... W 15:36:07 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 15:36:07 Retrying (2 of 3)... W 15:36:28 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 15:36:28 Retrying (3 of 3)... W 15:36:45 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 15:37:06 Exporting Graph Data... I 15:37:06 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_3-13_PM_RITEK-S04-66_MAX.ibg I 15:37:06 Export Successfully Completed! I 15:37:06 Operation Successfully Completed! - Duration: 00:23:30 I 15:37:06 Average Write Rate: 7,765 KB/s (5.6x) - Maximum Write Rate: 11,176 KB/s (8.1x) I 15:43:05 Operation Started! I 15:43:05 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 15:43:05 Source File Sectors: 4,267,015 (MODE1/2048) I 15:43:05 Source File Size: 8,738,846,720 bytes I 15:43:05 Source File Volume Identifier: DVD_ROM I 15:43:05 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 15:43:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:43:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:43:05 Source File File System(s): ISO9660, UDF (1.50) I 15:43:05 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 15:43:05 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 15:43:05 Destination Media Supported Write Speeds: 4x, 6x, 8x I 15:43:05 Destination Media Sectors: 4,267,040 I 15:43:05 Write Mode: DVD I 15:43:05 Write Type: DAO I 15:43:05 Write Speed: MAX I 15:43:05 DVD+R DL Reserve Track: No I 15:43:05 Link Size: Auto I 15:43:05 Lock Volume: Yes I 15:43:05 Test Mode: No I 15:43:05 OPC: No I 15:43:05 BURN-Proof: Enabled I 15:43:05 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:43:05 Book Type Setting: DVD-ROM I 15:43:05 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 15:43:05 Optimal L0 Data Zone Capacity: 2,133,520 I 15:43:05 Optimal L0 Data Zone Method: Copied From Original Disc I 15:43:05 Set L0 Data Zone Capacity Succeeded! I 15:43:05 Filling Buffer... (80 MB) I 15:43:07 Writing LeadIn... I 15:44:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 15:44:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 15:44:08 Writing Layer 0... (LBA: 0 - 2133519) I 15:53:15 Writing Layer 1... (LBA: 2133520 - 4267014) I 16:02:31 Synchronising Cache... I 16:03:22 Closing Track... W 16:03:39 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:03:39 Close Track Failed! - Reason: Power Calibration Area Is Full W 16:03:39 Retrying (1 of 3)... W 16:03:53 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:03:53 Retry Failed - Reason: Power Calibration Area Is Full W 16:03:53 Retrying (2 of 3)... W 16:04:10 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:10 Retry Failed - Reason: Power Calibration Area Is Full W 16:04:10 Retrying (3 of 3)... W 16:04:24 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:24 Retry Failed - Reason: Power Calibration Area Is Full W 16:04:26 Retrying (4)... W 16:04:40 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:40 Retry Failed - Reason: Power Calibration Area Is Full E 16:05:30 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:05:30 Closing Track (Last Attempt!)... E 16:05:47 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:05:47 Finalising Disc... W 16:05:47 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 16:05:47 Retrying (1 of 3)... W 16:06:01 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 16:06:01 Retrying (2 of 3)... W 16:06:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 16:06:19 Retrying (3 of 3)... W 16:06:33 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 16:10:33 Exporting Graph Data... I 16:10:33 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_3-43_PM_RITEK-S04-66_MAX.ibg I 16:10:33 Export Successfully Completed! I 16:10:33 Operation Successfully Completed! - Duration: 00:27:27 I 16:10:33 Average Write Rate: 7,744 KB/s (5.6x) - Maximum Write Rate: 11,176 KB/s (8.1x) I 16:28:04 Operation Started! I 16:28:04 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 16:28:04 Source File Sectors: 4,267,015 (MODE1/2048) I 16:28:04 Source File Size: 8,738,846,720 bytes I 16:28:04 Source File Volume Identifier: DVD_ROM I 16:28:04 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 16:28:04 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:28:04 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:28:04 Source File File System(s): ISO9660, UDF (1.50) I 16:28:04 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 16:28:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 16:28:04 Destination Media Supported Write Speeds: 4x, 6x, 8x I 16:28:04 Destination Media Sectors: 4,267,040 I 16:28:04 Write Mode: DVD I 16:28:04 Write Type: DAO I 16:28:04 Write Speed: MAX I 16:28:04 DVD+R DL Reserve Track: No I 16:28:04 Link Size: Auto I 16:28:04 Lock Volume: Yes I 16:28:04 Test Mode: No I 16:28:04 OPC: Yes I 16:28:04 BURN-Proof: Disabled I 16:28:04 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 16:28:04 Book Type Setting: DVD-ROM I 16:28:04 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 16:29:06 Optimal L0 Data Zone Capacity: 2,133,520 I 16:29:06 Optimal L0 Data Zone Method: Copied From Original Disc I 16:29:06 Set L0 Data Zone Capacity Succeeded! I 16:29:06 Filling Buffer... (80 MB) I 16:29:07 Writing LeadIn... I 16:29:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 16:29:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 16:29:11 Writing Layer 0... (LBA: 0 - 2133519) I 16:38:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 16:47:32 Synchronising Cache... I 16:48:32 Closing Track... W 16:48:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:48:49 Close Track Failed! - Reason: Power Calibration Area Is Full W 16:48:49 Retrying (1 of 3)... W 16:49:04 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:04 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:04 Retrying (2 of 3)... W 16:49:21 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:21 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:21 Retrying (3 of 3)... W 16:49:35 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:35 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:36 Retrying (4)... W 16:49:51 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:51 Retry Failed - Reason: Power Calibration Area Is Full E 16:56:59 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:56:59 Closing Track (Last Attempt!)... Edited November 7, 2012 by HipsterHD
LIGHTNING UK! Posted November 7, 2012 Posted November 7, 2012 Overburning onto RITEK-S04-66 at 8x speed? You're brave! Try at a more civilised speed of 4x.
HipsterHD Posted November 8, 2012 Author Posted November 8, 2012 Overburning onto RITEK-S04-66 at 8x speed? You're brave! Try at a more civilised speed of 4x. I love the humour, thanks though I will be sure to try it.
Recommended Posts