Burns fine but fails to verify

[nihan2k]

Hi guys...i have been using Imgburn to burn xdg3 files for quite some time now..everything was working fine till yesterday and now i keep getting the same error and it fails to verify at 50% each time. i checked this forum and tried various settings but to no avail. any help would be greatly appreciated. thanks..

 

here is the log:

 

I 19:40:23 ImgBurn Version 2.5.7.0 started!

I 19:40:23 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 19:40:23 Total Physical Memory: 6,282,424 KB - Available: 4,053,004 KB

I 19:40:23 Initialising SPTI...

I 19:40:23 Searching for SCSI / ATAPI devices...

I 19:40:24 -> Drive 1 - Info: ATAPI iHAS324 B AL1B (F:) (ATA)

I 19:40:24 -> Drive 2 - Info: HL-DT-ST BDDVDRW GGC-H20L 1.03 (E:) (ATA)

I 19:40:24 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (I:) (Unknown)

I 19:40:24 Found 1 DVD-ROM, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM/DVD±RW!

I 19:45:39 Operation Started!

I 19:45:39 Source File: C:\imars-blkops2.dvd

I 19:45:39 Source File Sectors: 4,267,015 (MODE1/2048)

I 19:45:39 Source File Size: 8,738,846,720 bytes

I 19:45:39 Source File Volume Identifier: DVD_ROM

I 19:45:39 Source File Volume Set Identifier: b4b08000MS UDFBridge

I 19:45:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:45:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:45:39 Source File File System(s): ISO9660, UDF (1.50)

I 19:45:39 Destination Device: [2:1:0] ATAPI iHAS324 B AL1B (F:) (ATA)

I 19:45:39 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 19:45:39 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x

I 19:45:39 Destination Media Sectors: 4,267,040

I 19:45:39 Write Mode: DVD

I 19:45:39 Write Type: DAO

I 19:45:39 Write Speed: 4x

I 19:45:39 DVD+R DL Reserve Track: No

I 19:45:39 Link Size: Auto

I 19:45:39 Lock Volume: Yes

I 19:45:39 Test Mode: No

I 19:45:39 OPC: Yes

I 19:45:39 BURN-Proof: Disabled

I 19:45:39 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 19:45:39 Book Type Setting: DVD-ROM

I 19:45:39 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: Yes, SmartBurn: Yes

I 19:46:09 Optimal L0 Data Zone Capacity: 2,133,520

I 19:46:09 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:46:10 Set L0 Data Zone Capacity Succeeded!

I 19:46:10 Filling Buffer... (512 MB)

I 19:46:17 Writing LeadIn...

I 19:46:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 19:46:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 19:46:18 Writing Layer 0... (LBA: 0 - 2133519)

I 19:59:31 Writing Layer 1... (LBA: 2133520 - 4267014)

I 20:12:52 Synchronising Cache...

I 20:12:56 Closing Track...

I 20:12:57 Finalising Disc...

I 20:13:29 Exporting Graph Data...

I 20:13:29 Graph Data File: C:\Users\Meeth Nihan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_13-NOVEMBER-2012_7-45_PM_MKM-003-00_4x.ibg

I 20:13:29 Export Successfully Completed!

I 20:13:29 Operation Successfully Completed! - Duration: 00:27:50

I 20:13:29 Average Write Rate: 5,357 KB/s (3.9x) - Maximum Write Rate: 5,640 KB/s (4.1x)

I 20:13:29 Cycling Tray before Verify...

W 20:13:37 Waiting for device to become ready...

I 20:13:52 Device Ready!

I 20:13:52 Operation Started!

I 20:13:52 Source Device: [2:1:0] ATAPI iHAS324 B AL1B (F:) (ATA)

I 20:13:52 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)

I 20:13:52 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x

I 20:13:52 Image File: C:\imars-blkops2.dvd

I 20:13:52 Image File Sectors: 4,267,015 (MODE1/2048)

I 20:13:52 Image File Size: 8,738,846,720 bytes

I 20:13:53 Image File Volume Identifier: DVD_ROM

I 20:13:53 Image File Volume Set Identifier: b4b08000MS UDFBridge

I 20:13:53 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:13:53 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:13:53 Image File File System(s): ISO9660, UDF (1.50)

I 20:13:53 Read Speed (Data/Audio): MAX / MAX

I 20:13:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 20:13:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 20:13:54 Verifying Layer 0... (LBA: 0 - 2133519)

I 20:23:06 Verifying Layer 1... (LBA: 2133520 - 4267014)

W 20:23:13 Failed to Read Sectors 2133552 - 2133583 - Reason: L-EC Uncorrectable Error

W 20:23:24 Failed to Read Sector 2133568 - Reason: L-EC Uncorrectable Error

E 21:52:22 Failed to Read Sector 2133568 - Reason: L-EC Uncorrectable Error

E 21:52:23 Failed to Verify Sectors!

I 21:52:24 Exporting Graph Data...

I 21:52:24 Graph Data File: C:\Users\Meeth Nihan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_13-NOVEMBER-2012_7-45_PM_MKM-003-00_4x.ibg

I 21:52:24 Export Successfully Completed!

E 21:52:24 Operation Failed! - Duration: 01:38:30

I 21:52:24 Average Verify Rate: 722 KB/s (0.5x) - Maximum Verify Rate: 11,237 KB/s (8.1x)

[LIGHTNING UK!]

In the drive advanced settings (or eeprom tool), disable online hypertuning and overspeed, then perform a 'clear opc history'.

 

re-enable the burnproof option, it doesn't do anything to DVD+ (plus) format media.

 

The 'perform opc before write' option made no difference for me during testing. I just left is disabled in the end.

[nihan2k]

will try it out and let u know...thanks a lot!!!

[nihan2k]

worked perfectly!!! thanks a lot

[supanova]

Any chance of posting a burnlog with PI &PIF results?