Deer Posted December 2, 2012 Share Posted December 2, 2012 (edited) Hello. I tried to write on a BD-R Verbatim LTH 6x 25GB disc but I get this error at the very beginning. This is my first try ever. What am I doing wrong? Do I need 25 GB of free space to perform the "Write files/folders to disk" task? I'm a few GB behind that mark. Anyway here it is: I/O Error! Device: [3:0:0] edited ScsiStatus: 0x02 Interpretation: Check Condition CDB: AA 00 00 00 03 40 00 00 00 20 40 00 Interpretation: Write (12) - Sectors: 832 - 863 Sense Area: 70 00 04 00 00 00 00 0E 00 00 00 00 44 A1 00 00 00 00 SK Interpretation: Hardware Error ASC/ASCQ Interpretation: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xA1) After I click "Retry" it shows this error: I/O Error! Device: edited ScsiStatus: 0x02 Interpretation: Check Condition CDB: AA 00 00 00 03 40 00 00 00 20 40 00 Interpretation: Write (12) - Sectors: 832 - 863 Sense Area: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00 SK Interpretation: Illegal Request ASC/ASCQ Interpretation: Invalid Address For Write Edited December 16, 2012 by Deer Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 2, 2012 Share Posted December 2, 2012 The LTH media isn't as well supported by drives, nor as reliable. It's cheaper for a reason There's a 1.30 firmware update available for the 207M, maybe it'll help? http://www.firmwarehq.com/Pioneer/BDR-207M/files.html You could also try burning at the other speeds the drive claims to support on that MID. (i.e. 2x and 6x) Maybe it'll do a better job at one of those rather than 4x. Link to comment Share on other sites More sharing options...
Recommended Posts