Jump to content

Bad Blue Ray Burn


mgrace47

Recommended Posts

Am having problems with my blue ray burns. Below is the log. Am using Pioneer burner with optical quantum 25 GB disks. I also used blue ray rebuilder to shrink the file to under 25 GB. Help please.

 

I 00:37:27 Operation Started!

I 00:37:27 Source Device: [0:0:0] PIONEER BD-RW BDR-206 1.05 (D:) (ATAPI)

I 00:37:27 Source Media Type: BD-R (Disc ID: PHILIP-R04-000)

I 00:37:27 Source Media Supported Write Speeds: 2x, 4x, 6x, 8x, 10x

I 00:37:27 Image File: -==/\/[bUILD IMAGE]\/\==-

I 00:37:27 Image File Sectors: 11,117,024 (MODE1/2048)

I 00:37:27 Image File Size: 22,767,665,152 bytes

I 00:37:27 Image File Volume Identifier: INDIANA_JONES_4_D1

I 00:37:27 Image File Volume Set Identifier: 419501E200A9A168

I 00:37:27 Image File Application Identifier: ImgBurn v2.5.7.0

I 00:37:27 Image File Implementation Identifier: ImgBurn

I 00:37:27 Image File File System(s): UDF (2.50)

I 00:37:27 Read Speed (Data/Audio): MAX / MAX

I 00:37:28 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11117023)

I 00:37:28 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11117023)

W 01:17:22 Failed to Read Sectors 10413344 - 10413375 - Reason: L-EC Uncorrectable Error

W 01:17:24 Failed to Read Sector 10413344 - Reason: L-EC Uncorrectable Error

W 01:17:24 Sector 10413344 maps to File: \BDMV\STREAM\00000.m2ts

E 12:37:18 Failed to Read Sector 10413344 - Reason: L-EC Uncorrectable Error

E 12:37:18 Sector 10413344 maps to File: \BDMV\STREAM\00000.m2ts

E 12:37:18 Failed to Verify Sectors!

I 12:37:20 Exporting Graph Data...

I 12:37:20 Graph Data File: C:\Users\Mike\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.05_FRIDAY-DECEMBER-21-2012_12-15_AM_PHILIP-R04-000_4x.ibg

I 12:37:20 Export Successfully Completed!

E 12:37:20 Operation Failed! - Duration: 11:59:51

Link to comment
Share on other sites

Windows told me my driver was up to date until I went to this site and used the firmware update utility. Now I'm current. Thank you and I am quite impressed with your knowledge. I will try a new burn immediately and see if that fixes the issue.

 

Also, I have a newly installed Asus BW 12b1st. Where would I see if an update exists for that one?

 

Thanks again.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.