iivampire Posted December 27, 2012 Share Posted December 27, 2012 Hey, I have a problem with my imgburn, i trying to backup my xbob360 games, but whenever i burn my image imgburn is stuck at writing LeadIn, no error, i have to shutdown my computer in order to take out the dvd from my drive cause otherwise my drive becomes non responsive.... Am i missing some windows update ?? Because if I burn mp3 through windows copy & pase function everything goes well. I am posting my imgburn log I 10:19:56 ImgBurn Version 2.5.7.0 started! I 10:19:56 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 10:19:56 Total Physical Memory: 2,096,568 KB - Available: 1,326,912 KB W 10:19:56 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 10:19:56 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:19:56 Initialising SPTI... I 10:19:56 Searching for SCSI / ATAPI devices... I 10:19:58 -> Drive 1 - Info: ATAPI iHAS324 B AL1B (G (ATA) I 10:19:59 -> Drive 2 - Info: Optiarc DVD RW AD-7220A 1.01 (F (ATA) I 10:19:59 Found 2 DVD±RW/RAMs! I 10:20:14 Operation Started! I 10:20:14 Source File: D:\FarCry3.dvd I 10:20:14 Source File Sectors: 4,267,015 (MODE1/2048) I 10:20:14 Source File Size: 8,738,846,720 bytes I 10:20:14 Source File Volume Identifier: DVD_ROM I 10:20:14 Source File Volume Set Identifier: cbf4000 I 10:20:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:20:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:20:14 Source File File System(s): ISO9660, UDF (1.50) I 10:20:14 Destination Device: [2:0:0] ATAPI iHAS324 B AL1B (G (ATA) I 10:20:14 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00) I 10:20:14 Destination Media Supported Write Speeds: 2.4x I 10:20:14 Destination Media Sectors: 4,267,040 I 10:20:14 Write Mode: DVD I 10:20:14 Write Type: DAO I 10:20:14 Write Speed: 2.4x I 10:20:14 DVD+R DL Reserve Track: No I 10:20:14 Link Size: Auto I 10:20:14 Lock Volume: Yes I 10:20:14 Test Mode: No I 10:20:14 OPC: Yes I 10:20:14 BURN-Proof: Enabled I 10:20:14 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 10:20:14 Book Type Setting: DVD-ROM I 10:20:14 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 10:20:49 Optimal L0 Data Zone Capacity: 2,133,520 I 10:20:49 Optimal L0 Data Zone Method: Copied From Original Disc I 10:20:49 Set L0 Data Zone Capacity Succeeded! I 10:20:50 Filling Buffer... (512 MB) I 10:21:00 Writing LeadIn... Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 28, 2012 Share Posted December 28, 2012 If it's just sat there doing nothing, the I/O command must be stuck somewhere. Unfortunately, I can't force your system/drive to process the commands. The program simply submits them and then waits for a response. Try in safe mode. If it works ok then, it's probably driver related - either the driver for the actual controller the drive is attached to or a 3rd party filter driver that the I/O commands are passing through. Link to comment Share on other sites More sharing options...
Recommended Posts