Random Bug on build

[Adrianvdh]

Hi when I just started up ImgBurn and clickd to folder icon to choose a folder to build I go this error... Please be nice sorry if this is NOT a bug and tell me...

 

 

Ok like 2 seconds later i get the same problem problem...

 

I 00:59:01 ImgBurn Version 2.5.7.0 started!

I 00:59:02 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 00:59:02 Total Physical Memory: 8 379 444 KB - Available: 4 962 904 KB

W 00:59:02 DVDFab Passkey can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 00:59:02 Initialising SPTI...

I 00:59:02 Searching for SCSI / ATAPI devices...

I 00:59:02 -> Drive 1 - Info: DTSOFT BDROM 1.05 (T:) (Virtual)

I 00:59:03 -> Drive 2 - Info: ATAPI iHAS524 B AL2A (S:) (ATA)

I 00:59:04 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (E:) (ATA)

I 00:59:04 Found 1 DVD±RW/RAM, 1 BD-ROM and 1 BD-RE!

I 01:00:43 Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.01 (E:) (ATA)

I 01:00:43 Family Tree:

I 01:00:43 -> ACPI x64-based PC

I 01:00:43 -> Microsoft ACPI-Compliant System

I 01:00:43 -> PCI bus

I 01:00:43 -> Intel® 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B26 (VEN_8086&DEV_3B26 - Intel - pciide - v9.1.1.1013)

I 01:00:43 -> IDE Channel (ATA Channel 0)

I 01:00:43 -> CD-ROM Drive (HL-DT-ST BD-RE BH10LS30 ATA Device) (Channel 0, Target 0, Lun 0)

Edited January 1, 2013 by Adrianvdh

[LIGHTNING UK!]

That's just Windows messing around.

 

You must have used something on E: at some point and that drive is no longer valid/available but Windows is still trying to look at it and is throwing up that error.

[Adrianvdh]

Well is it possible for ImgBurn to make that drive valid (like in a build in script in ImgBurn)?

[LIGHTNING UK!]

Put a non blank disc in it.

[Adrianvdh]

Ok thanks