BlazingFist Posted January 30, 2013 Share Posted January 30, 2013 (edited) I 19:22:39 ImgBurn Version 2.5.7.0 started! I 19:22:39 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2) I 19:22:39 Total Physical Memory: 3.134.500 KB - Available: 2.141.376 KB I 19:22:39 Initialising SPTI... I 19:22:39 Searching for SCSI / ATAPI devices... I 19:22:40 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 19:22:41 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-T40N JT03 (D:) (ATA) I 19:22:41 Found 1 DVD±RW/RAM and 1 BD-ROM! W 19:22:50 Device Arrival Detected! I 19:22:50 Searching for SCSI / ATAPI devices... I 19:22:50 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 19:22:51 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-T40N JT03 (D:) (ATA) I 19:22:51 Found 1 DVD±RW/RAM and 1 BD-ROM! I 19:23:50 Operation Started! I 19:23:50 Source File: C:\Users\User\Downloads\Vanquish (2010) [Xbox360][MULTi5][RegionFree][Wave6][WwW.ZoNaTorrent.CoM]\Vanquish (2010) [Xbox360][MULTi5][RegionFree][Wave6][WwW.ZoNaTorrent.CoM].dvd I 19:23:50 Source File Sectors: 3.827.488 (MODE1/2048) I 19:23:50 Source File Size: 7.838.695.424 bytes I 19:23:50 Source File Volume Identifier: DVD_ROM I 19:23:50 Source File Volume Set Identifier: ec67c000MS UDFBridge I 19:23:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:23:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:23:50 Source File File System(s): ISO9660; UDF (1.50) I 19:23:50 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T40N JT03 (D:) (ATA) I 19:23:50 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 19:23:50 Destination Media Supported Write Speeds: 2,4x; 4x I 19:23:50 Destination Media Sectors: 4.173.824 I 19:23:50 Write Mode: DVD I 19:23:50 Write Type: DAO I 19:23:50 Write Speed: 2x I 19:23:50 DVD+R DL Reserve Track: No I 19:23:50 Link Size: Auto I 19:23:50 Lock Volume: Yes I 19:23:50 Test Mode: No I 19:23:50 OPC: No I 19:23:50 BURN-Proof: Enabled W 19:23:50 Write Speed Miscompare! - MODE SENSE: 3.324 KB/s (2,4x), GET PERFORMANCE: 5.540 KB/s (4x) W 19:23:50 Write Speed Miscompare! - MODE SENSE: 3.324 KB/s (2,4x), GET PERFORMANCE: 5.540 KB/s (4x) W 19:23:50 Write Speed Miscompare! - MODE SENSE: 3.324 KB/s (2,4x), GET PERFORMANCE: 5.540 KB/s (4x) W 19:23:50 Write Speed Miscompare! - MODE SENSE: 3.324 KB/s (2,4x), GET PERFORMANCE: 5.540 KB/s (4x) W 19:23:50 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 3.324 KB/s (2,4x) / 5.540 KB/s (4x) W 19:23:50 The drive only supports writing these discs at 2,4x; 4x. I 19:23:50 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 19:23:50 Optimal L0 Data Zone Capacity: 1.913.760 I 19:23:50 Optimal L0 Data Zone Method: Copied From Original Disc I 19:24:59 Set L0 Data Zone Capacity Succeeded! I 19:24:59 Filling Buffer... (40 MB) I 19:25:01 Writing LeadIn... I 19:25:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:25:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:25:06 Writing Layer 0... (LBA: 0 - 1913759) I 19:44:52 Writing Layer 1... (LBA: 1913760 - 3827487) I 20:05:01 Synchronising Cache... I 20:06:03 Closing Track... I 20:06:12 Finalising Disc... As of now it is finalizing, but it is stuck at 0%! I have been waiting alot but no progress is made, and the burner made some loud noises but it completely silent now. Yes I am using TDK DL discs instead of Verbatim because they don't sell those in my local area. I need some help, quick! Edited August 23, 2018 by BlazingFist Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 30, 2013 Share Posted January 30, 2013 Press the F8 key to enable I/O debug mode (you'll get confirmation in the Log window) and see if the drive is still processing I/O. If it is, you should see entries being added to the log window each second as the program polls the drive to see if it has finished processing that command yet. Link to comment Share on other sites More sharing options...
BlazingFist Posted January 30, 2013 Author Share Posted January 30, 2013 I 20:51:46 [0:0:0] HL-DT-ST DVDRAM GSA-T40N JT03 (D:) (ATA)I 20:51:46 CDB: 00 00 00 00 00 00I 20:51:46 CDB Interpretation: Test Unit ReadyE 20:51:46 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 3E 04 07 00 80 00 34E 20:51:46 SENSE SK Interpretation: Not ReadyE 20:51:46 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Operation in progress - 0%I 20:51:47 [0:0:0] HL-DT-ST DVDRAM GSA-T40N JT03 (D:) (ATA)I 20:51:47 CDB: 00 00 00 00 00 00I 20:51:47 CDB Interpretation: Test Unit ReadyE 20:51:47 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 3E 04 07 00 80 00 34E 20:51:47 SENSE SK Interpretation: Not ReadyE 20:51:47 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Operation in progress - 0%this is the message that continually gets written i dont think this is a good thing.... Link to comment Share on other sites More sharing options...
BlazingFist Posted January 30, 2013 Author Share Posted January 30, 2013 EDIT; just as i posted that, imgburn started finalizing, im not sure if the debug option was what made it work. Thanks anyways! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 30, 2013 Share Posted January 30, 2013 Debug mode didn't make it work (it enables logging, nothing more), your drive probably just managed it in the end... or if the real sense data was getting lost somewhere, it suddenly got found. Link to comment Share on other sites More sharing options...
Recommended Posts