vze2mp9g Posted January 31, 2013 Share Posted January 31, 2013 I know this might have been asked in the past, but I'm trying to make a bootable DVD from a Windows 8 install disk. I copied all the files from the Win8 installation disk to the HDD, took a few files I didn't need out, and added a couple of my own. Now, I have all the files I want to make a bootable DVD from on my HDD (D:\Windows8\ ), can someone tell me when I go to write all the files to an ISO file, I checked off "Make Image Bootable", then I go to write the ISO, now it's asking me for a "You have not selected a file to act as a boot image!". Where would I find this boot image file on the Windows 8 installation disk? Lastly, is it possible to take an ISO file and, instead of writting to a disk, you would write the ISO to files on your disk, so that you can modify the ISO? I would appreciate it if anyone can assist me concerning this matter. Thank You. if you don't stand for something, you'll fall for anything...___________________________________________OS: Windows 7 x32 Ultimate V6.01 Build 7601 Service Pack 1||MoBo: ASUS P4P800-E Deluxe || CPU: Socket 478 for Intel® Pentium® 4 (Northwood) 3.00GHz [D1]|| Ram: 2GB of 400MHz Dual DDR RAM (Corsair)GPU: Radeon HD4650 2Gb || Monitor: Acer H274HL (HDMI) || HDD: 1Tb Western Digital Black Drive || DVD ROM: SONY DVD RW DRU-830A ATA Device || Blu-Ray DVD ROM: LG HL-DT-ST BD-RE GBW-H20L Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 31, 2013 Share Posted January 31, 2013 This guide should still apply to Windows 8. http://forum.imgburn.com/index.php?showtopic=11194 You can usually extract ISO files using normal compression programs - WinRAR, WinZip, 7-Zip etc. Link to comment Share on other sites More sharing options...
Recommended Posts