EskiBoy Posted February 19, 2013 Posted February 19, 2013 Ive used imgburn on multiple occasions and each time its work perfectly But now, when i insert my dual layer disc, it says that the disc is not empty? The Log on the right: HL-DT-ST DVDRAM (SATA) Current Profile: DVD+R DL Disc Information: Status: Unknown State of Last Session: Unknown Erasable: Unknown Formatted: Unknown Sessions: Unknown Free Sectors: 4,172,800 Free Space: 8,545,894,400 bytes Free Time: 927:19:25 (MM:SS:FF) Next Writable Address: 1024 Supported Write Speeds: 3x, 4x, 6x Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11,080 KB/s (8x) - WS: 4,155 KB/s (3x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11,080 KB/s (8x) - WS: 8,310 KB/s (6x) Thanks in advance
LIGHTNING UK! Posted February 19, 2013 Posted February 19, 2013 Is that a straight copy + paste of the disc info text? It's missing the drive model and firmware version You probably have a deeper system issue (controller / drivers / cable etc).
EskiBoy Posted February 19, 2013 Author Posted February 19, 2013 Is that a straight copy + paste of the disc info text? It's missing the drive model and firmware version You probably have a deeper system issue (controller / drivers / cable etc). Yep, Its the little log box on the right hand side. And do you have any soloutions?
LIGHTNING UK! Posted February 19, 2013 Posted February 19, 2013 Load the program, switch to Write mode and then press the F8 key to enable I/O debug mode. Now click Tools -> Search for SCSI/ATAPI devices Once it's finished and that disc info box is filled out, press F8 again. Then click File -> Save As in the Log window and save it to a file. Upload the file here on the forum for me to look at please.
LIGHTNING UK! Posted February 19, 2013 Posted February 19, 2013 "in the Log window" If you've closed it (shame on you!), open it again via the 'View' menu.
EskiBoy Posted February 19, 2013 Author Posted February 19, 2013 Ohhh I forgot i even closed the log window >.< Sorry about that log.log
LIGHTNING UK! Posted February 19, 2013 Posted February 19, 2013 Try the v11.7 Intel Rapid Storage Tech. drivers, the v11.5 ones you're running there could be messing things up. http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2557&DwnldID=22271&keyword=%22rapid%22&lang=eng
EskiBoy Posted February 19, 2013 Author Posted February 19, 2013 Ive installed the updated version but it still says that the disc is not empty?
LIGHTNING UK! Posted February 19, 2013 Posted February 19, 2013 Does the disc info look different yet? It probably won't work properly until it at least also displays the drive model and firmware version. Maybe try an older driver? If 10.8 works with your chipset, give that a shot.
Recommended Posts