faceless041974 Posted March 25, 2013 Share Posted March 25, 2013 So Ive been encountering a lot of failed burns lately and cant figure out why. Im using the same media and drives I always do. All of the fails have been to I/O errors and today the program just locked up mid burn. Any ideas? Ive included a log file in hopes that someone can help me with this.ImgBurn.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 25, 2013 Share Posted March 25, 2013 I'm not seeing errors in that, just a ton of buffering issues where your source drive is unable to keep up with the writer. Lockups are usually driver related. Link to comment Share on other sites More sharing options...
faceless041974 Posted March 25, 2013 Author Share Posted March 25, 2013 The drivers for the drives are up to date as is the firmware. What would cause I/O errors? I dont want to waste another bluray just to create another log file. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 25, 2013 Share Posted March 25, 2013 I was talking more about the drivers for the SATA controller. As yours appears to be running in 'RAID' mode I can only assume it's an AMD board or something? Intel ones don't normally present themselves in that way. I/O errors are errors the drive reports when attempting to burn to the media - so they're normally caused by your drive not liking the discs you're using (or at least not liking them at the speed you're burning them at). Link to comment Share on other sites More sharing options...
faceless041974 Posted March 26, 2013 Author Share Posted March 26, 2013 Here is another current log file. Ive been using the same discs and drives for months now and this is a new current problem so I dont see how it can be a driver issue. Yes its an AMD board ImgBurn2.log Link to comment Share on other sites More sharing options...
faceless041974 Posted March 26, 2013 Author Share Posted March 26, 2013 This is the main error I keep encountering. ImgBurn3.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 26, 2013 Share Posted March 26, 2013 The drive is just reporting a 'Write Error'. There's nothing I can do about that I'm afraid, it's purely an issue between your drive and the media. Try burning at 4x rather than MAX (6x). Link to comment Share on other sites More sharing options...
faceless041974 Posted March 27, 2013 Author Share Posted March 27, 2013 Ive done that even tried at 2x. I looked at the drivers for my burners and Anydvd is listed first instead of the microsoft one could that cause this? If so how do I change the order of that so it uses the microsoft driver and not the anydvd one? Link to comment Share on other sites More sharing options...
Recommended Posts