Rrrr Posted June 7, 2013 Share Posted June 7, 2013 Hi Apologies in advance for getting back to this old theme, but I have not found a solution to my problem: I need to burn a double layer disc to DVD-ROM type (Verbatim MKM-003-00) understand that after setting book type to DVD-ROM, it is for some drive not obvious to verify the setting other than burning a disc and reading it back in. ISSUE From the many postings, I cannot understand how I can be certain I am looking at the right information when reading the right-hand window after inserting the burned DVD+R DL. When I look at the top, current profile, it says DVD+R DL for a burned disc. This is different with a DVD bought at the shop: it says then DVD-ROM. It seems easy enougn, but when I look further down, it says book type a number of times, sometimes DVD-ROM and sometimes DVD+R DL Can someone with more experience than me, tell me how to be sure if this DVD (log below) was burned with DVD-ROM set? Should I look at: - Current profile: DVD+R DL - Physical Format Information (ADIP - L0) : DVD+R DL - Physical Format Information (ADIP - L1): DVD+R DL - Physical Format Information (Last Recorded - L1): DVD-ROM Thanks in advance ===== TSSTcorp DVD+-RW TS-U633J D600 (SATA) Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 1,593,424 Size: 3,263,332,352 bytes Time: 354:07:49 (MM:SS:FF) Supported Read Speeds: 0, 4x, 6x, 8x Current Read Speed: 3.3x - 8x, 8x - 3.3x File System Information: Sectors: 1,593,422 Size: 3,263,328,256 bytes Time: 354:07:47 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 1593423) -> LeadOut (LBA: 1593424) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 1593424, LRA: 0) Disc Control Blocks Information: TSSTcorp TS-U633J Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,591 Last Physical Sector in Layer 0: 993,327 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,591 Last Physical Sector in Layer 0: 993,327 Layer Information: Layer 0 Sectors: 796,720 (50%) Layer 1 Sectors: 796,704 (50%) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 7, 2013 Share Posted June 7, 2013 The 'physical format information - last recorded' one is the important one. Link to comment Share on other sites More sharing options...
Rrrr Posted June 7, 2013 Author Share Posted June 7, 2013 thanks a lot for your lightning fast reply (this means the burning was correct, but nevertheless the DVD not properly recognised as authentic.) Link to comment Share on other sites More sharing options...
Recommended Posts