Jump to content

Invalid Address for Write error_50GB Panasonic DL BDR


andy666
 Share

Recommended Posts

Hi

Thanks for looking and suggestions. I have wasted two panasonic 50 GB DL BDR burning two different images which I tested with Panasonic DL BD RE and they worked well. I get an error at around 52% with the following input:

 

 SK interpretation: Illegal request

ASC/ASCQ Interpretation: Invalid address for write.

 

I have attached the log

 

log.txt

Edited by andy666
Link to comment
Share on other sites

Just to add:

I am using Windows 7 and I have Lacie external slim Bluray writer USB 3. I had no problem with Panasonic 25 GB BD RE and 50 GB DL BD RE.It is the Panasonic DL BDR that I am having difficulty with. I also tried the external hard drive on my ultrabook with USB3 and I got similar message but the sectors are slightly different. Here is the new log:

 

I 09:46:35 ImgBurn Version 2.5.8.0 started!
I 09:46:35 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 09:46:35 Total Physical Memory: 10,368,576 KiB  -  Available: 6,206,044 KiB
I 09:46:35 Initialising SPTI...
I 09:46:35 Searching for SCSI / ATAPI devices...
I 09:46:35 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual)
I 09:46:35 -> Drive 2 - Info: Optiarc BD RW BD-5750H 1.00 (G:) (USB 3.0)
I 09:46:35 Found 1 BD-ROM and 1 BD-RE XL!
I 09:51:04 Operation Started!
I 09:51:04 Source File: C:\Users\.....Videos\oip2\----iso
I 09:51:04 Source File Sectors: 18,145,280 (MODE1/2048)
I 09:51:05 Source File Size: 37,161,533,440 bytes
I 09:51:05 Source File Volume Identifier: .........
I 09:51:05 Source File Volume Set Identifier: 8CF6ABE67A7AD214_VOLUME_SET_ID
I 09:51:05 Source File Application Identifier: APPLICATION_ID
I 09:51:05 Source File Implementation Identifier: IMPLEMENTATION_ID
I 09:51:05 Source File File System(s): UDF (2.50)
I 09:51:05 Destination Device: [0:0:0] Optiarc BD RW BD-5750H 1.00 (G:) (USB)
I 09:51:05 Destination Media Type: BD-R (Disc ID: MEI-T02-001)
I 09:51:05 Destination Media Supported Write Speeds: 2x, 4x
I 09:51:05 Destination Media Sectors: 24,438,784
I 09:51:05 Write Mode: BD
I 09:51:05 Write Type: DAO
I 09:51:05 Write Speed: MAX
I 09:51:05 Hardware Defect Management Active: No
I 09:51:05 BD-R Verify Not Required: Yes
I 09:51:05 Link Size: Auto
I 09:51:05 Lock Volume: Yes
I 09:51:05 Test Mode: No
I 09:51:05 OPC: No
I 09:51:05 BURN-Proof: Enabled
I 09:51:05 Write Speed Successfully Set! - Effective: 17,983 KB/s (4x)
I 09:51:52 Filling Buffer... (80 MiB)
I 09:51:52 Writing LeadIn...
I 09:51:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 18145279)
I 09:51:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 18145279)
I 09:51:52 Writing Layer 0... (LBA: 0 - 12219391)
W 10:18:15 Failed to Write Sectors 9611872 - 9611903 - Reason: Write Error
W 10:18:15 Retrying (1 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (2 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (3 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (4 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (5 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (6 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (7 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (8 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (9 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (10 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (11 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (12 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (13 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (14 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (15 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (16 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (17 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (18 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (19 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
W 10:18:15 Retrying (20 of 20)...
W 10:18:15 Retry Failed - Reason: Invalid Address For Write
E 10:18:42 Failed to Write Sectors 9611872 - 9611903 - Reason: Write Error
E 10:18:42 Next Writable Address: 9608896
I 10:18:42 Synchronising Cache...
I 10:18:49 Closing Track...
I 10:18:52 Finalising Disc...
E 10:19:10 Failed to Write Image!
I 10:19:10 Exporting Graph Data...
I 10:19:10 Graph Data File: C:\Users\Ammar\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_BD_RW_BD-5750H_1.00_SUNDAY-7-JULY-2013_9-51_AM_MEI-T02-001_MAX.ibg
I 10:19:10 Export Successfully Completed!
E 10:19:10 Operation Failed! - Duration: 00:28:05
I 10:19:10 Average Write Rate: 11,947 KiB/s (2.7x) - Maximum Write Rate: 17,607 KiB/s (4.0x)
 
 
 
 
 
 
 
From reading other posts with similar but not exactly the same problem writing error, suggestions have been to try to update the firmware but Lacie does not have a new Firmware to download. Changing the discs is what I am going to do next but I have bought 20 PanasonicDL BDR discs at an expensive price and it is supposedly a good manufacturer so I am disappointed that this waste of money. I guess I am going to try either another software or change my internal drive from DVd to BLURAY drive. 
I guess if I have no suggestions here, I will first try a new software and then I will try the Verbatim discs when I receive them before changing the drive..Any suggestions on the above options are very appreciated.
 
Thanks for looking and trying to help me.
 
Andy
Edited by andy666
Link to comment
Share on other sites

Try update the drivers related to the ports. Maybe try another port or new cable.

 

Try the drive on other computer with the same media.

 

Try different media.

 

Does Lacie have any suggestion on what media to use? They should offer some recommendation on tested media.

 

An internal drive is always better than an external. The externals have their reason but aren't much reliable.

Link to comment
Share on other sites

Thanks for the suggestions. As you see, I have tried the drive on another computer and it failed again. I have asked Lacie for Firmware update and apparently there is no updates available. I will try using the USB 2 port (I added USB 3 port to my desktop through a card) and I have also changed the cable as suggested by you and Lacie. I will post  again if I am successful. 

 

So I guess, if the attempt fails, the next step will be either another media or internal drive. I always had the intention of getting an internal drive, so I guess I will get one if the Verbatim fails. I will have to look at the recommended drives in the forum.

 

Thanks once again. 

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.