del72 Posted July 17, 2013 Posted July 17, 2013 (edited) the message says experience tell me that your drive isnt currently configured for optimal overburning performance online hyper tunning should be disabled overspeed should be disabled would you like me to make the nessary changes i dont know what ive done to start gettin this message but my burns have gone to shite, if anybody could offer help or advice plase thanks should have said im using ihas and verbatim disks and have tried 4 different spindles with same results Edited July 17, 2013 by del72
LIGHTNING UK! Posted July 17, 2013 Posted July 17, 2013 Have you actually let the program make the necessary changes? Once you have, post your full burn+verify log and a screenshot of the kprobe scan.
del72 Posted July 17, 2013 Author Posted July 17, 2013 Have you actually let the program make the necessary changes? Once you have, post your full burn+verify log and a screenshot of the kprobe scan. ok thanks i run a burn now and post the log thanks
del72 Posted July 17, 2013 Author Posted July 17, 2013 ok this is my last burn,i usally nero disk speed to check the disks,up untill 2 weeks ago i always got a score of around93/94 but now all my burns score 0 I 11:46:20 ImgBurn Version 2.5.8.0 started! I 11:46:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:46:20 Total Physical Memory: 1,047,536 KiB - Available: 696,728 KiB I 11:46:20 Initialising SPTI... I 11:46:20 Searching for SCSI / ATAPI devices... I 11:46:20 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:46:20 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (D:) (RAID) I 11:46:21 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:47:08 Operation Started! I 11:47:08 Source File: F:\xbox\imars-deadpool.dvd I 11:47:08 Source File Sectors: 4,267,015 (MODE1/2048) I 11:47:09 Source File Size: 8,738,846,720 bytes I 11:47:09 Source File Volume Identifier: DVD_ROM I 11:47:09 Source File Volume Set Identifier: a6cec000MS UDFBridge I 11:47:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:47:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:47:09 Source File File System(s): ISO9660, UDF (1.50) I 11:47:09 Destination Device: [1:0:0] ATAPI iHAS124 B AL0S (D:) (RAID) I 11:47:09 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:47:09 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 11:47:09 Destination Media Sectors: 4,267,040 I 11:47:09 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 11:47:09 Write Mode: DVD I 11:47:09 Write Type: DAO I 11:47:09 Write Speed: 4x I 11:47:09 DVD+R DL Reserve Track: No I 11:47:09 Link Size: Auto I 11:47:09 Lock Volume: Yes I 11:47:09 Test Mode: No I 11:47:09 OPC: Yes I 11:47:09 BURN-Proof: Disabled I 11:47:09 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 11:47:09 Book Type Setting: DVD-ROM I 11:47:09 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:47:09 CD/DVD Life Record Count: 148 - CD/DVD Record Count: 9 I 11:47:37 User Specified L0 Data Zone Capacity: 2,133,520 I 11:47:38 Set L0 Data Zone Capacity Succeeded! I 11:47:38 L0 Data Zone Capacity - Effective: 2,133,520 I 11:47:39 Filling Buffer... (513 MiB) I 11:48:05 Writing LeadIn... I 11:48:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:48:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:48:07 Writing Layer 0... (LBA: 0 - 2133519) I 12:01:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 12:14:31 Synchronising Cache... I 12:14:36 Closing Track... I 12:14:37 Finalising Disc... I 12:15:10 Exporting Graph Data... I 12:15:10 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_17-JULY-2013_11-47_MKM-003-00_4x.ibg I 12:15:10 Export Successfully Completed! I 12:15:10 Operation Successfully Completed! - Duration: 00:28:01 I 12:15:10 Average Write Rate: 5,391 KiB/s (4.0x) - Maximum Write Rate: 5,512 KiB/s (4.1x) I 12:16:05 Close Request Acknowledged I 12:16:05 Closing Down... I 12:16:05 Shutting down SPTI... I 12:16:05 ImgBurn closed! I 11:46:20 ImgBurn Version 2.5.8.0 started! I 11:46:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 11:46:20 Total Physical Memory: 1,047,536 KiB - Available: 696,728 KiB I 11:46:20 Initialising SPTI... I 11:46:20 Searching for SCSI / ATAPI devices... I 11:46:20 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:46:20 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (D:) (RAID) I 11:46:21 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:47:08 Operation Started! I 11:47:08 Source File: F:\xbox\imars-deadpool.dvd I 11:47:08 Source File Sectors: 4,267,015 (MODE1/2048) I 11:47:09 Source File Size: 8,738,846,720 bytes I 11:47:09 Source File Volume Identifier: DVD_ROM I 11:47:09 Source File Volume Set Identifier: a6cec000MS UDFBridge I 11:47:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:47:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:47:09 Source File File System(s): ISO9660, UDF (1.50) I 11:47:09 Destination Device: [1:0:0] ATAPI iHAS124 B AL0S (D:) (RAID) I 11:47:09 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:47:09 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 11:47:09 Destination Media Sectors: 4,267,040 I 11:47:09 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 11:47:09 Write Mode: DVD I 11:47:09 Write Type: DAO I 11:47:09 Write Speed: 4x I 11:47:09 DVD+R DL Reserve Track: No I 11:47:09 Link Size: Auto I 11:47:09 Lock Volume: Yes I 11:47:09 Test Mode: No I 11:47:09 OPC: Yes I 11:47:09 BURN-Proof: Disabled I 11:47:09 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 11:47:09 Book Type Setting: DVD-ROM I 11:47:09 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:47:09 CD/DVD Life Record Count: 148 - CD/DVD Record Count: 9 I 11:47:37 User Specified L0 Data Zone Capacity: 2,133,520 I 11:47:38 Set L0 Data Zone Capacity Succeeded! I 11:47:38 L0 Data Zone Capacity - Effective: 2,133,520 I 11:47:39 Filling Buffer... (513 MiB) I 11:48:05 Writing LeadIn... I 11:48:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:48:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:48:07 Writing Layer 0... (LBA: 0 - 2133519) I 12:01:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 12:14:31 Synchronising Cache... I 12:14:36 Closing Track... I 12:14:37 Finalising Disc... I 12:15:10 Exporting Graph Data... I 12:15:10 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_17-JULY-2013_11-47_MKM-003-00_4x.ibg I 12:15:10 Export Successfully Completed! I 12:15:10 Operation Successfully Completed! - Duration: 00:28:01 I 12:15:10 Average Write Rate: 5,391 KiB/s (4.0x) - Maximum Write Rate: 5,512 KiB/s (4.1x http://imageshack.us/photo/my-images/713/1t0r.png/ this is the link for kprobe sorry i didnt know how to add it
LIGHTNING UK! Posted July 17, 2013 Posted July 17, 2013 Turn OPC back off and re-enable burnproof. The results you're getting in kprobe aren't normal for a correctly functioning drive with decent discs. Normally you'd get a bad spike at the layerbreak if the FHT/OHT etc settings aren't quite right but yours is just all out rubbish from quite a way before that. Did you let the program adjust the drive settings or did you do it yourself manually? If you did it manually, make sure you clear OPC history on the drive before trying again. I'd get another fresh batch of discs if I were you. If they produce the same results, try another drive.
del72 Posted July 17, 2013 Author Posted July 17, 2013 (edited) thanks lightning i let program do the adjustments, this is the 4th batch of verbs in 2 weeks so i think i can rule out the disks ,when you say turn opc off do you mean in settings untick perform opc before write,or would it make any difference if i flashed the burner back to stock firmware and tried using payload tools just trying to burn another with the changes you said and gettin this message in log set lo data zone capacity failed-reason invalid feild in parameters list Edited July 17, 2013 by del72
LIGHTNING UK! Posted July 17, 2013 Posted July 17, 2013 Yes, untick 'perform opc before write' in the settings. just trying to burn another with the changes you said and gettin this message in log set lo data zone capacity failed-reason invalid feild in parameters list That's normal.
del72 Posted July 17, 2013 Author Posted July 17, 2013 (edited) thank you lightning looks like its the drive ,have tried a few more burns but got same results even opened the drive to give it a clean .oh well looks like im in the market for a new drive i dont soppose you could point me to a list of drives that works with payload tools Edited July 17, 2013 by del72
Recommended Posts